2023 Ram 1500 Performance Air Intake Kits

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a black Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

This K&N NextGen cold air intake system is engineered for your DODGE/RAM 1500 V8-5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 43.2 percent to your engine and provides an increase of 17.62 horsepower and 28.50 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Unique Integrated Filter-to-Housing Intake Design:Quantum uses an integrated filter-to-housing design by attaching both components with 4 captive screws for a positive surface area seal and quick and easy install. Quantum’s roto-molded housing features a unique, 5 rib industrial grade look for long lasting durability and aFe quality recognition.Quantum Pro 5R Performance Air Filter:It’s equipped with our pre-oiled, 360-degree radial flow air filter with five-layers of progressive cotton gauze media, providing optimum flow, protection and performance. Specifically designed for the Quantum Series intake systems, each filter features an injection molded base and top for lighter weight and rigidity. Captive screws are used to eliminate lost hardware and to securely fasten to housing. The base includes a built-in, 3-angle velocity stack for smooth, even airflow. Inverted top filters offer more surface area for longer life and an exceptional look.Dyno Tuned Intake Tube:Quantum uses a dyno tuned, CAD-designed intake tube to achieve optimum air flow and is made from high impact, XLPE material for heat soak resistance and durability while maintaining a perfect fit.Silicone Bellows Coupling:The Quantum Intake System includes a silicone bellows coupling to absorb excessive engine movement and is flexible for a secure and easy install. Quantum intakes are designed with fewer parts for a quick and simple installation.Hassle-Free Installation:This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All clamps, couplings and hardware are included for hassle-free installation.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

This K&N NextGen cold air intake system is engineered for your RAM 1500 V8-5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 36.51 percent to your engine and provides an increase of 19.94 horsepower and 19.93 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

“7”” Tall Air Filter:This intake system utilizes an oil free, 7″” tall flat top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.High Quality Tube:This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. A plastic injected fitting is mounted on the tube to provide a perfect connection for the temperature sensor.Top Mounted Heat Shield Design:aFe developed this 18 Gauge sturdy Powder-Coated black heat shield to snap onto the top of the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations.Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Fitment Note:This item does not fit the 2019 RAM 1500 Classic models”

This K&N NextGen cold air intake system is engineered for your RAM 1500 L6-3.0L TT. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 32.5% to your engine and provides an increase of 41.13 horsepower and 67.85 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

“Designed as a economical solution to cat-back exhaust systems, this direct-fit muffler is for all 2019*-2024, 2026 RAM 1500 (*new body style) with the 5.7L Hemi engine. This direct-fit muffler delivers a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep powerful exhaust note. Features include 3.00-inch mandrel-bent stainless steel tubing flowing into a specially designed dual 3.00-inch inlet/outlet Flow FX “”straight-through”” muffler for great sound and maximum performance. Utilizes the factory hangers and connections and easily installs in about 25 minutes. Includes all necessary parts, hardware and easy to follow installation instructions. Covered by our One (1) Year Limited Warranty. Notes: Fits all 2/4 wheel drives and wheelbases, with either a factory single tailpipe or factory dual tailpipes.”

“Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. With a massive 5″” flange, this 9″” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique One-Piece Housing:The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its optional auxiliary air inlet can be plugged with an included silicone plug if desired.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Momentum intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary T-bolt clamps, couplings, and hardware are included.”

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

This K&N NextGen cold air intake system is engineered for your RAM 1500 V6-3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 61.8 percent to your engine and provides an increase of 14.66 horsepower and 25.70 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

K&N , 70-1578. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from K&N

K&N , 70-1564. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from K&N

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction blue Spectre High Performance Racing (HPR) air filter, polished aluminum intake tubing and a black powder coated heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack adapter, couplers, clamps, and all necessary hardware for an OE fit and finish. The stock Intake Air Temperature sensor mounts on the intake tube using the supplied grommet.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

K&N , 70-1561. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from K&N