Name: Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart
Brand: Castrol
SKU: 15979F
Price: 11.99 USD
Rating: 5.0 (111 reviews)

Essential Oil and Lubricants for 2023 Land Rover Defender 110s

from

$11.99

Castrol EDGE High Mileage 5W-30 is an advanced full synthetic motor oil that is specifically designed for vehicles with over 75,000 miles. It’s been engineered to reduce leaks, burnoff and power robbing deposits, but also contains a proprietary additive to protect the emission system. Our Phosphorus Replacement Technology reduces harmful phosphorus to protect the catalytic converter and extend maximum performance. It is the natural choice for drivers who demand maximum performance from their high mileage car.

Product Features:

Product Features:

Phosphorus Replacement Technology to help extend the life of the emission system
Reduces leaks, oil burnoff and power robbing deposits
15,000 miles between oil changes (1)
(1) Or one year, whichever comes first
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets engine test requirements of Chrysler MS 6395
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$8.29

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
Refresh aging seals and prevent leaks with seal conditioners
Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
Enhanced friction performance helps maximize power with advanced friction-fighting agents
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Synthetic Blend: Our unique combination of synthetic and premium conventional oils provides superior protection against wear, friction, heat, and deposits.

from

$7.49

FRAM Full Synthetic High Mileage SAE 5W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and and enhanced additives that meet the stringent API: SP, SN, SM, SL, SJ, and ILSAC GF-6A specifications while reducing leaks and oil consumption in worn or higher mileage engines. Formulated with synthetic base stocks, this oil offers increased oxidation inhibition performance as well as increased high and low temperature performance when compared against conventional oils. The FRAM Full Synthetic High Mileage SAE 5W-20 is formulated to help clean out sludge buildup and keep engines running clean and with increased efficiency and power. Specially designed for engines with over 75,000 miles, the FRAM Full Synthetic High Mileage SAE 5W-20 provides the ultimate protection for your higher mileage engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Full Synthetic High Mileage SAE 5W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability for higher mileage vehicles over previous oil categories.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Reduces oil cumsumption
Excellent sludge and varnish protection
Slows engine leaks
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Protection for Advanced Engine Designs: Specifically designed for gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, providing increased protection and preventing low-speed pre-ignition (LSPI) which can lead to premature engine failure.
Increased Wear Protection and Stability: Provides increased wear protection, oxidation, and shear stability for higher mileage vehicles, ensuring long-lasting engine performance and reliability.

from

$18.99

Fully synthetic LIQUI MOLY specialty with a unique additive technology. The powerful MFC (Molecular Friction Control) technology prevents formation of deposits while simultaneously reducing frictional losses. The synergetic effect provides optimum wear protection even under tough operating conditions. Improved fuel consumption and increased engine life are some of the end results. The oils fluorescent green color is typical for the MFC formulation.

Product Features:

Product Features:

Outstanding engine cleanliness
Excellent high and low temperature behavior
Friction and wear reducing
Optimum stability to aging
Enhanced fuel efficiency through reduced frictional losses.

from

$11.99

EDGE 5W-30 Full Synthetic Motor Oil delivers exceptional performance with advanced wear protection that is three times better at reducing friction, ensuring smoother engine operation and extended longevity. Its superior engine cleanliness, measured at 1.9 times better in rigorous testing, helps maximize performance by keeping critical components free from harmful deposits. Designed to meet and exceed industry standards, this oil is approved for ACEA C3, API SP, BMW Longlife-04, VW 504 00/507 00, MB-Approval 229.31/229.51/229.52, Porsche C30, and Renault RN 0700/RN 0710 specifications, making it compatible with a wide range of high-performance vehicles. With its full synthetic composition and SAE 5W-30 weight, it ensures optimal viscosity and protection across varying temperatures. Ideal for drivers seeking reliability and efficiency, this motor oil is engineered to optimize performance while safeguarding your engine against wear and tear.

Product Features:

Product Features:

3X Better wear protection to reduce friction and optimize performance (1)
1.9X Better engine cleanliness to help maximize engine performance (1)
(1) As measured in OM646LA test vs. test limit
Approved and licensed specifications:
ACEA C3
API SP
BMW Longlife-04
VW 504 00 / 507 00
MB-Approval 229.31/ 229.51/ 229.52
Porsche C30
Renault RN 0700 / RN 0710

from

$27.99

FRAM Engine Oil Full Synthetic SAE 0W-20 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 0W-20 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 0W-20 and is a fully licensed GM dexos1 Gen 2 motor oil.

Product Features:

Faster oil flow at start-up
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability, lowers oil vaporization and consumption at extreme conditions
Always refer to your vehicles operating manual to select the correct grade oil for your engine.
Ultimate engine protection: FRAM Full Synthetic 0W20 5 QT is specifically formulated to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 2 and ILSAC GF-6A specifications to provide the ultimate protection for your engine.

from

$134.99

Valvoline Full Synthetic Motor Oil delivers superior engine protection by fighting the three major causes of engine stress: heat, deposits and wear. When you want to keep your engine running its best, choose the ultimate protection found in Valvoline Full Synthetic Motor Oil. Valvoline Full Synthetic Motor Oil meets the GM(1) dexos1 Gen2 and API SN PLUS specifications, helping protect gasoline direct injected engines from low-speed pre-ignition.

Product Features:

Product Features:

Excellent engine cleanliness through superior sludge and varnish protection
Outstanding high-temperature protection under severe driving conditions
Superior cold-temperature protection through faster oil flow at start-up
Is fully compatible with all conventional and leading synthetic motor oils
Provides advanced protection against low-speed pre-ignition (LSPI) in gasoline direct-injected engines, meeting GM dexos1 Gen2 and API SN PLUS standards.

from

$37.99

Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

Product Features:

1.2X Better viscosity control to help engines run better for longer (1)
2X Better engine cleanliness to help maximize engine performance (1)
(1) As measured in DV6 test vs. test limit
Approved and licensed specifications:
ACEA A3/B4
API SP
BMW Longlife-01
Porsche A40
MB-Approval MB 229.5
Renault RN0700 / RN0710
VW 502 00 / 505 00
Meets engine test requirements of Chrysler MS 12991

from

$6.49

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

Low-Speed Pre-Ignition Control
Chain Wear Protection
Piston Cleanliness
Turbo-Compatibility
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Versatile Compatibility: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI), as well as older carbureted or normally fuel-injected gasoline engine designs.
High-Quality Conventional Base Stocks: Utilizes a blend of high-quality conventional base stocks to ensure reliable engine protection across a broad range of operating conditions.
Meets Stringent Standards: Complies with API SP, SN Plus, SN, SM, and ILSAC GF-6A, GF-5, and earlier API and ILSAC Service Categories, ensuring it meets the latest industry requirements.
SAE oil weight of 10W-30, making it a dependable choice for various engine types.

from

$27.99

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 & is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

Faster oil flow at start-up.
Fuel efficiency gains over heavier grade oils
Excellent sludge and varnish protection
Outstanding thermal and oxidation stability
Lowers oil vaporization and consumption at extreme conditions
ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.
Ultimate Engine Protection: FRAM Engine Oil Full Synthetic SAE 5W-30 meets stringent API: SP, SN, SM, SL, SJ, GM Dexos1 Gen 3, and ILSAC GF-6A specifications, ensuring top-tier protection for your engine.
Advanced Additive Technology: Specifically formulated to prevent low-speed pre-ignition (LSPI), a major concern for vehicles with gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs, reducing the risk of premature engine failure.
Enhanced Wear Protection: Provides increased wear protection, oxidation, and shear stability over previous oil categories, extending the life of your engine.
Versatile Compatibility: Suitable for use in carbureted, normally fuel-injected engines, and the rigorous environment of GDI and TGDI engines, offering broad application versatility.
Fully Licensed GM dexos1 Gen 3: This oil is a fully licensed GM dexos1 Gen 3 motor oil, ensuring it meets the high standards set by General Motors for optimal engine performance.

from

$30.99

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Engine Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering superior dispersancy to combat sludge buildup. This premium synthetic blend offers exceptional protection against oil burn-off, surpassing industry standards, and features seal conditioners to help minimize leaks. Engineered with advanced additives, it reduces engine wear and improves fuel economy in 5W-20, 5W-30, and 10W-30 grades. Meeting or exceeding API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, as well as Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, this oil ensures reliable performance and compatibility with a wide range of vehicles. Perfect for drivers seeking durability and efficiency, this 5-quart solution is tailored to keep engines running smoothly while protecting against wear and sludge for long-lasting value.

Product Features:

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
Meets or exceeds the following specifications:
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$9.49

Castrol® GTX® High Mileage 5W-30 Synthetic Blend Motor Oil is the ultimate choice for extending the life of high-mileage engines. Designed with advanced Phosphorus Replacement Technology, it safeguards emission systems by reducing catalytic converter damage while delivering exceptional protection against sludge, wear, and oil burn-off. This synthetic blend exceeds industry standards for volatility and dispersancy, ensuring your engine stays cleaner and performs better over time. With seal conditioners to minimize leaks and advanced additives to reduce engine wear, it’s engineered to keep your vehicle running smoothly. Compatible with API SP/SN PLUS/SN/SM and ILSAC GF-6 specifications, it meets Ford WSS-M2C946-B1 and WSS-M2C961-A1 standards, making it a reliable choice for a wide range of vehicles. Additionally, its improved fuel economy in 5W-30 grade adds value by optimizing performance and efficiency. Perfect for drivers seeking durability and superior engine protection in a convenient 1-quart size.

Product Features:

Product Features:

Phosphorus Replacement Technology helps extend emission system life
Superior dispersancy that fights sludge build up
Exceptional oil burn-off protection exceeding industry standards (1)
Seal conditioners to help reduce leaks
Advanced additives that minimize engine wear
Improved fuel economy (2)
(1) Based on API and ACEA volatility specifications
(2) In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Meets or exceeds the following specifications:
API SP/SN PLUS/SN/SM
ILSAC GF-6
Meets Ford WSS-M2C946-B1
Meets Ford WSS-M2C961-A1

from

$11.49

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

Product Features:

Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
Extends engine life: Valvoline Full Synthetic High Mileage with MaxLife Technology is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits

from

$6.49

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets the requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Low-speed pre-ignition control
Chain wear protection
Piston cleanliness
Turbo-compatibility
Always refer to your vehicles operating manual to select the correct grade oil for your engine.

from

$59.99

Valvoline SAE 75W-90 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our detergent package-based formulation contains Full Synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline SAE 75W-90 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance. Protect your gears with Valvoline, the No. 1 gear oil brand.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION , ranging from -30F to 300F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP HYPOID DIFFERENTIALS where APPI GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4 or MT-1 fluid
MEETS OR EXCEEDS THE PERFORMANCE REQUIREMENTS for Mack GO-H and GO-J; API GL-5 and API MT-1; MIL-PRF-2105E; and SAE J2360

FAQs for 2023 Land Rover Defender 110 Oil and Lubricants

Which Oil and Lubricants are best-sellers for 2023 Land Rover Defender 110s?

Out of 3 Oil and Lubricants that fit 2023 Land Rover Defender 110s, the following parts are the top sellers:

Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter (50209885) – $20.49
Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 5 Liter (50209884) – $68.99

What’s the price range for 2023 Land Rover Defender 110 Oil and Lubricants?

Oil and Lubricant prices for the 2023 Land Rover Defender 110 start at $20.49 and go up to $68.99 for the most premium parts.

What’s the average price of a Oil and Lubricant for a 2023 Land Rover Defender 110?

The average price for Oil and Lubricants for the 2023 Land Rover Defender 110 is $49.82. Keep in mind the variety of part types within our Oil and Lubricant category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Oil and Lubricants for other Land Rover Defender 110 model years?

Yes, we currently carry Oil and Lubricants for 3 model years of Land Rover Defender 110s between 1993 and 2022. Oil and Lubricants are bought most frequently for the following model years: 2022, 2021, 2020, and 1993.

What are the cheapest Oil and Lubricants for my 2023 Land Rover Defender 110?

The cheapest 2023 Land Rover Defender 110 Oil and Lubricants we carry in stock are:

Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter (50209885) – $20.49
SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (12048192) – $59.99
Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 5 Liter (50209884) – $68.99

What are the top-rated Oil and Lubricants that fit the 2023 Land Rover Defender 110?

Out of 364 reviews by customers, our 2023 Land Rover Defender 110 Oil and Lubricants have an average customer rating of . These are some of the highest-rated Oil and Lubricant types for the 2023 Land Rover Defender 110 and their top-rated products:

Lubricants
- SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (12048192) – $59.99

What types of Oil and Lubricants do you sell for my 2023 Land Rover Defender 110?

As of 11/2/25, these are some of the most in-demand types of Oil and Lubricants for a 2023 Land Rover Defender 110:

Can I get help with 2023 Land Rover Defender 110 Oil and Lubricant orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Land Rover Oil and Lubricants and more.

What is your return policy for Land Rover Defender 110 Oil and Lubricants?

Advance Auto Parts keeps returns simple. For new Land Rover Defender 110 Oil and Lubricants and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2023 Land Rover Defender 110 Oil and Lubricants

Castrol – Edge High Mileage 5W-30 Full Synthetic Motor Oil, Reduces Leaks & Deposits, 1 Quart (Part No.15979F)

Valvoline – High Mileage 5W-20 Synthetic Blend Engine Oil, Maximize Engine Life, 1 Quart (Part No.609506)

FRAM – High Mileage 5W-20 Full Synthetic Motor Oil, Reduces Oil Consumption, 1 Quart (Part No.F923)

LIQUI MOLY – Molygen 5W-40 Full Synthetic Motor Oil, Reduces Friction & Wear, 1 Liter (Part No.20230)

Castrol – Edge 5W-30 Full Synthetic Motor Oil, Reduces Friction & Optimizes Performance, 1 Quart (Part No.15E892)

FRAM – 0W-20 Full Synthetic Motor Oil, Helps Extend Engine Life, 5 Quart (Part No.F900-5QT)

Valvoline – 0W-20 Full Synthetic Motor Oil, Superior Performance in Extremes, 5 Gallon (Part No.881663)

Castrol – Edge 5W-40 Full Synthetic Motor Oil, Maximizes Engine Performance, 5 Quart (Part No.15B6FE)

FRAM – 10W-30 Conventional Motor Oil, Prevents Low-Speed Pre-Ignition, 1 Quart (Part No.F630)

FRAM – 5W-30 Full Synthetic Motor Oil, Faster Oil Flow at Start-Up, 5 Quart (Part No.F930-5QT)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Engine Oil, Protects Against Sludge, 5 Quart (Part No.15980E)

Castrol – GTX High Mileage 5W-30 Synthetic Blend Motor Oil, Protects Against Sludge & Wear, 1 Quart (Part No.149D6A)

Valvoline – Full Synthetic High Mileage 10W-30 Engine Oil, Maximizes Engine Life, 1 Quart (Part No.VV180)

FRAM – 10W-40 Conventional Motor Oil, Low-Speed Pre-Ignition Control, 1 Quart (Part No.F640)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Gallon (Part No.882505)

LIQUI MOLY – Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 5 Liter (Part No.22046)

LIQUI MOLY – Top Tec 6600 0W-20 Full Synthetic Motor Oil, Improves Engine Efficiency, 1 Liter (Part No.22044)