2023 Honda Civic Performance and Racing Products

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

All new Takeda Momentum Sealed Intake System produces up to 7 HP and 8 lbs./ft. of torque over while outflowing the factory intake by 57 percent. Also included is a rotomolded intake tube designed to increase airflow for maximum torque. Takeda intakes come with all necessary hardware. Features a one piece rotomolded air box that incorporates a built in air scoop opening that captures cold air from the front of the vehicle. An aerodynamic rounded filter top is used to reduce air resistance and direct airflow smoothly into the intake track. This intake system features a unique patent pending filter to air box interface that creates a flawless seal. This momentum intake system features a unique looped tube engineered to improve low end torque.

The AEM 21-792C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is placed into the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor And engine vent line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-792C vehicle applications to determine the legal status for each vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

“Large Three Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/2″” flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. A larger, upgraded air inlet captures air from the factory scoop and delivers it directly to the air filter.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.”

“With five layers of progressively finer mesh cotton gauze media between 100% polyurethane top and base, this high flow “”oiled”” conical performance filter provides excellent airflow for maximum horsepower and torque. Washable and reusable for multiple cleanings, the tall, open, evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter.”

The K&N 69-1008TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-1008TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that’s made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and an Allen wrench. ach vehicle and air intake.

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

The Takeda Momentum Pro 5R intake is essential when upgrading the performance of your Civic Si. This system outflows the factory intake, while allowing the car to breathe and perform to its greatest potential. The Pro 5R filter consists of an oiled 5-layer mesh cotton gauze media for maximum performance and filtration. The Pro 5R maintains a 98.6% efficiency rating, allowing high air flow and optimal performance even when dirty.

Takeda intakes are constructed out of lightweight black wrinkle finish aluminum tubing or clear-coat anodized polished tubing for maximum air flow and a great style. This intake uses a large 360 degree high flow Pro DRY S air filter for maximum flow, filtration and convenience. The Pro DRY S air filter requires no oils and cleans with simple soap and water. Takeda intakes come complete with all tubing, filters, couplers and hardware for an easy installation.

“Large Five Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/2″” flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed. A larger, upgraded air inlet captures air from the factory scoop and delivers it directly to the air filter.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.”