from

$70.99

The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:

ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.

from

$117.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$49.99

Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine control module (ECM) to adjust timing
Helps prevent damage to the engine caused by pre-ignition
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$41.49

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
Delphi knock sensors prevent against engine damage from pre-ignition knocking
Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
Self-generating piezoelectric design requires no power to the sensor

from

$28.99

Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Trivalent iridescent chromate plating prevents corrosion
Silicone seals prevent moisture intrusion preventing false codes and sensor failure
Wiring harnesses utilize high-temperature insulation when applicable
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$28.99

Carquest Premium knock sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium knock sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. We utilize advanced technology to design sensors that are, in many cases, stronger than OE parts. Carquest Premium knock sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium knock sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Trivalent iridescent chromate plating prevents corrosion
Silicone seals prevent moisture intrusion preventing false codes and sensor failure
Wiring harnesses utilize high-temperature insulation when applicable
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$28.99

Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
Designed to meet or exceed all OEM specifications in fit, form & function
Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$95.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$80.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$323.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$89.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$113.99

Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.

Product Features:

Meets or exceeds OEM specification
Ensures reliable voltage for smooth engine performance

from

$67.99

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$94.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$10.49

SEAL

from

$6.99

Double Platinum Spark Plug: Enhanced Durability & Longer Service Life is engineered for peak performance and reliability. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring consistent ignition and extended service life. The yttrium-enhanced ground electrode offers superior heat transfer, making it highly durable under extreme temperatures and pressure. Its high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for added safety. Designed with a mid-projection standard center electrode and tapered seat type, this spark plug is tailored for performance-grade applications. Both the center and ground electrode tips are crafted from platinum, delivering enhanced durability and efficiency. Ideal for distributor-less ignition system (DIS) engines, it outperforms copper and standard platinum plugs, making it a valuable upgrade for those seeking reliability and longevity in their ignition system.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and tapered seat type, this spark plug ensures precise fit and optimal performance for performance-grade applications.

from

$13.49

ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Iridium is the latest in spark plug technology and is an exact replacement for vehicles’ original components
Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.99

The Iridium TT Spark Plug combines the durability of an OE-style plug with the power and torque of high-performance engineering, making it a standout choice for automotive enthusiasts. Featuring a 0.4mm Iridium center electrode – the world’s smallest diameter – it maximizes firing potential, while the 0.7mm needle tip ground electrode enhances spark energy and minimizes heat quenching. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium for unmatched durability, even under extreme conditions exceeding 4000 Deg F. The 360-degree laser welding process ensures a robust bond and structural integrity, delivering consistent performance. Designed with a tapered seat type for a secure fit, this spark plug not only enhances fuel economy and reduces emissions but also offers the capability to drive around the Earth over four times with improved efficiency. For those seeking reliability, endurance, and peak performance, this spark plug is engineered to meet the highest standards of automotive excellence.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT
Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
Tapered Seat Type: Ensures a secure fit and optimal performance, tailored to meet the highest standards of automotive engineering.

from

$4.99

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them an ideal choice for maintaining your vehicle’s peak efficiency. Featuring a platinum center electrode, these spark plugs ensure long-lasting reliability and superior ignitability. The fine-wire center electrode and V-trimmed ground electrode work together to provide a sharper, more focused spark, enhancing combustion and overall engine performance. Constructed with the exclusive Heat-Active alloy, these plugs quickly reach and maintain optimal operating temperatures, ensuring consistent performance under various driving conditions. The platinum-tipped center wire resists wear and maintains the proper gap specification throughout the life of the plug, making it a dependable OE replacement. With a standard-grade design, a nickel ground electrode tip, and a tapered seat type, these spark plugs are built to meet the demands of modern engines while offering excellent value and reliability.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
OE Replacement: Designed as an ideal original equipment replacement, maintaining proper gap specification throughout the life of the plug.

from

$4.99

The Platinum Spark Plug is expertly crafted to deliver enhanced durability and performance for older engine applications. Featuring a platinum center electrode firing tip, it ensures quicker firing, smoother starts, and improved fuel efficiency while resisting gap erosion for a longer service life. Its high alumina ceramic insulator provides superior thermal conductivity and insulation, boosting strength and reliability under demanding conditions. The multi-rib insulator design prevents flash-over, ensuring consistent performance, while the nickel-plated shell offers exceptional corrosion resistance for extended durability. With a mid-projection standard electrode design and a tapered seat type, this performance-grade spark plug is built to meet the needs of discerning drivers. Whether you’re seeking better acceleration or reliable ignition, this spark plug delivers value and dependability with every drive.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Built with a mid-projection standard electrode design to optimize ignition performance and support smoother engine starts.

from

$17.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

from

$12.99

The Iridium Power Spark Plug features the world’s smallest Iridium Center Electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with a patented 360-degree laser welding assembly process, it ensures exceptional durability and reliability under extreme conditions. The U-groove and taper-cut ground electrode design optimizes flame propagation, enhancing overall engine performance. Built to withstand temperatures exceeding 4000 degrees Fahrenheit, this spark plug is burnished with nickel plating for superior high-temperature endurance and corrosion resistance. Its iridium tip material guarantees long-lasting performance, while the tapered seat type ensures a secure fit. With a wide range of part numbers available, it is compatible with thousands of applications, including classic and collector cars. Choose this spark plug for maximum spark energy, durability, and enhanced engine efficiency.

Product Features:

World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
Patented 360-degree laser welding assembly process
U-groove and taper cut ground electrode to maximize flame propagation.
Withstands temperatures greater than 4000 degree Fahrenheit
Burnished nickel plating for high temperature endurance and superior corrosion resistance
Wide range of part numbers for thousands of applications, including classic and collector cars
Iridium Power

from

$10.99

ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
Copper Core: Designed with a copper core to provide excellent heat transfer and electrical conductivity.
Conical Seat Type: Equipped with a conical seat type for a secure fit and optimal performance.
Built-in Resistor: Includes a built-in resistor to reduce radio frequency interference and ensure reliable operation.

from

$10.49

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Enhanced Vehicle Performance: Experience faster starts and quicker acceleration compared to conventional nickel spark plugs, making it an excellent upgrade for vehicles originally using nickel alloy spark plugs.
Economical Upgrade: NGK G-Power Platinum spark plugs provide a cost-effective solution for upgrading your vehicle’s spark plugs without compromising on quality.
Compatibility and Versatility: Ideal for a wide range of vehicles, these spark plugs are a perfect fit for those looking to replace their nickel alloy spark plugs with a more durable and efficient option.

from

$13.99

The Iridium TT Spark Plug combines the durability of an OE-style plug with the power and torque of high-performance engineering, making it a top choice for demanding drivers. Featuring a 0.4mm Iridium center electrode – the world’s smallest diameter – it maximizes firing potential for superior ignition. The 0.7mm needle tip ground electrode promotes higher spark energy while reducing heat quenching, ensuring consistent performance. Built with DENSO’s patented Iridium-Rhodium alloy formula, it boasts the highest concentration of Iridium among competitors, delivering unmatched durability. The 360-degree laser welding process ensures a robust bond and structural integrity, even under extreme conditions. With the ability to withstand temperatures exceeding 4000 Deg F, this spark plug is engineered for ultimate endurance. Its tapered seat design further enhances compatibility and fitment. Whether you’re seeking enhanced power or long-lasting reliability, this Iridium TT plug delivers exceptional value and performance.

Product Features:

0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
Durability of an OE style plug combined with Power and Torque of high performance.
Withstands temperatures greater than 4000 degree Fahrenheit
Iridium TT

from

$4.99

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them an ideal choice for maintaining your vehicle’s peak efficiency. Featuring a platinum center electrode, these spark plugs ensure long-lasting reliability and consistent performance. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for improved combustion. Constructed with the exclusive Heat-Active alloy, these plugs quickly reach and maintain optimal operating temperatures, ensuring smooth engine operation under various conditions. The platinum-tipped center wire resists wear and helps maintain the proper gap specification throughout the plug’s lifespan, reducing the need for frequent replacements. Designed as a standard replacement with a tapered seat type, these spark plugs are compatible with a wide range of vehicles. With a nickel ground electrode tip and integrated resistor, they provide dependable performance and value, making them a smart investment for any driver seeking powerful and efficient ignition.

Product Features:

Platinum Power- Premium Spark Plug. Powerful Performance.
Platinum center electrode for long life
Fine-wire center electrode for greater ignitability
V-trimmed ground electrode promotes sharper spark focus
Heat-Active alloy allows electrodes to reach optimal temperature
Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug

from

$15.99

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN – OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE – Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE – Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE – 98 percent pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING – Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE – Best for vehicles with OE fine wire iridium alloy plugs

from

$10.99

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Conical Seat Type: Designed with a conical seat type for a secure fit and reliable function.
Resistor Type: Includes a resistor to help reduce radio frequency interference, ensuring smooth engine performance.

2023 GMC Acadia Ignition and Tune-Up Products

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0050)

Carquest Premium – Knock Sensor (Part No.EKC1028)

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.213-4335)

Delphi – Knock Sensor (Part No.AS10262)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3656)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3698)

Carquest Premium – Ignition Knock (Detonation) Sensor with Bolt (Part No.EKC1007)

NGK – Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.49015)

Carquest Premium – Ignition Coil (Part No.EBC1009)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1009-6)

Carquest Premium – Ignition Coil (Part No.EBC1186)

Bosch – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.0221604112)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1033)

Carquest Premium – Ignition Coil (Part No.EBC1474)

GM Genuine Parts – SEAL (Part No.15814847)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Longer Service Life (Part No.APP5263)

ACDelco – Iridium Spark Plug: Reliable Cold Starts & Smooth Performance (Part No.41-988)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITV16TT (Part No.4718)

Champion – Platinum Power Spark Plug (RE14PMC): Powerful Performance & Durability (Part No.3570)

Autolite – Platinum Spark Plug: Enhanced Durability & Performance (Part No.AP5364)

NGK – Iridium IX Spark Plug (LTR6IX-11): Extreme Ignitability & Durability (Part No.6509)

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITV20 (Part No.5339)

ACDelco – Double Platinum Spark Plug: Long-Lasting Performance & Durability (Part No.41-990)

NGK – G-Power Platinum Spark Plug (LTR5GP): Enhanced Durability & Efficiency (Part No.5019)

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITV20TT (Part No.4719)

Champion – Platinum Power Spark Plug (RE10PMC5): Powerful Performance & Longevity (Part No.3032)

NGK – Laser Iridium Spark Plug (ILNAR7A9): Fine Wire Tip for Precision (Part No.92176)

ACDelco – Premium Double Platinum Tip Copper Core Spark Plug: Enhances Ignition System Durability (Part No.41-834)

Carquest Premium – Ignition Coil (Part No.EBC1009)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1033)

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3687)

Delphi – Knock Sensor (Part No.AS10262)

Carquest Premium – Knock Sensor (Part No.EKC1028)

GM Genuine Parts – SEAL (Part No.15814847)

ACDelco – Iridium Spark Plug: Reliable Cold Starting & Smooth Performance (Part No.41-130)

NGK – Iridium IX Spark Plug (LNAR7AIX): Extreme Ignitability & Durability (Part No.91768)

NGK – Laser Iridium Spark Plug (ILNAR7A9): Fine Wire Tip for Precision (Part No.92176)

NGK – Laser Iridium Spark Plug (ILNFR7A7G): Fine Wire Tip for High Efficiency (Part No.94524)