2023 Dodge Charger Cooling and Climate Controls

Name: A/C Condenser
Brand: Nissens
SKU: R1030434194NSS
Price: 399.03 USD

Below you will find various in-demand Dodge Cooling and Climate Controls, components and accessories for your 2023 Charger. Advance Auto Parts has popular Charger parts like HVAC Electrical Parts, Air Conditioning Parts, Blend Doors and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Charger model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2023 Dodge Charger Cooling and Climate Controls below and start saving instantly.

Popular 2023 Dodge Charger Cooling and Climate Controls Categories

Humidity Sensors

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Engine Coolant Thermostat Housing Caps

AC Compressor Without Clutch

Thermostats

Engine Cooling Fans

Radiator Fan Motors

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

Water Outlets

Blower Motor Resistors

AC Condensers

OE Cooling Fan Blades

AC Evaporators

Thermostat Housings

Thermostat Seals

Accumulator and Receiver Driers

ABS Speed Sensors

Water Pump Gaskets

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

AC Line Clip

Essential Cooling and Climate Controls for 2023 Dodge Chargers

from

$399.03

Nissens manufactures an A/C Condenser that is the same quality fit and performance of the OE Condenser it replaces.

Product Features:

OEM Quality Direct fit Application
Utilizes fixed feeder tubes with no fault tolerance in length, diameter and bending angle, providing protection against leaks and loss of efficiency.

from

$26.49

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$76.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$3.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$116.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$6.79

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$173.91

Plastic Tank / Aluminum Core Radiator CSF prides itself on using the most advanced technologies, machines, and experienced personnel to design, develop, and manufacture the world’s best cooling systems. With three privately owned, ISO certified manufacturing facilities that supply to local OE brands, CSF houses the industry’s best manufacturing equipment. CSF’s world class facilities manufacture the highest quality cooling system products available. Thanks to our cutting edge capabilities, we are able to produce the strongest and most complicated components with ease. CSF leads the industry in multi-fit models, which provides customers with additional application coverage, while reducing inventory. All CSF radiators undergo a rigorous testing process in our state-of-the-art testing lab. Our procedures and requirements set the bar for cooling system reliability and performance:

Product Features:

Individually leak tested
Vibration cycle tested
Thermal cycle tested
Wind tunnel tested for optimal radiator core cooling efficiency
Burst pressure and impulse cycle tested for strength
Salt spray tested for corrosion protection
10 foot box “drop test” to ensure packaging protection
30 point fitment inspection on critical dimensions to ensure OE fitment with no modifications necessary

from

$15.79

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
Coated with corrosion and rust inhibitor
100% leak tested
Direct-fit replacement for ease of installation

from

$119.99

Trimline Straight Blade Electric Fan

from

$39.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function & versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$373.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.
Matched high-quality needle-roller bearing ensures low friction and high load capability.

from

$31.49

Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:

100% Factory tested for leakage and dimensional precision
Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
Assembled with new, high-quality unitized shaft seals to prevent premature leakage
Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$45.49

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$7.79

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$204.99

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$61.99

This interior humidity sensor is engineered to match the fit, function and performance of the original sensor to help restore proper detection of humidity, windshield glass temperature, and dew point on specified vehicle years, makes and models..

Product Features:

Direct replacement – this humidity sensor is designed to match the fit, function and performance of the original interior humidity sensor on specified vehicle years, makes and models.
Restores functionality – engineered to help restore proper climate control cabin air recirculation mode when the factory interior humidity sensor has failed from electrical malfunction or impact
Durable construction – this sensor is made from quality materials for reliable service
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$359.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$9.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.49

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$34.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Precision machined ports

from

$12.49

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Switch monitors system pressures, aiding in proper and efficient control of the compressor, fans and system levels. An improperly functioning A/C Pressure Switch will provide erratic or inaccurate actuation and operation, severely affecting system performance and function. Without reliable and accurate actuation from a properly functioning A/C Pressure Switch, critical components and the system as a whole are left unregulated and unprotected which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to meet or exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Switch.
All units are tested using advanced end-of-line equipment that pressurize the A/C Pressure Switch, confirm proper calibration and functionality, and check for leaks to ensure each A/C Pressure Switch meets manufacturing specifications before packaging.

from

$16.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$15.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$218.24

Save time, money and labor with Dorman’s Engine Cooling Fan Assembly. It comes ready to install with the motor, shroud, and blade. Plus, the high fiberglass content offers extra strength and rigidity while improving thermal stability.

Product Features:

Optimal air flow prevents vehicle from overheating
Plug and Play jumper harnesses included (where applicable)
Direct replacement for a proper fit every time
All motors are tested prior to final packaging of fan assembly

from

$9.79

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$13.49

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$25.99

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

Upgrade your 2023 Dodge Charger with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2023 Dodge Charger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Charger functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Cooling and Climate Controls for the 2023 Dodge Charger, designed to meet your needs without breaking the bank. From HVAC Electrical Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2023 Dodge Charger at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $4.49 to $699.99, with an average price of $132.30. Our 46 Cooling and Climate Controls in stock come from 12 trusted brands, so you’re sure to find the right part for your 2023 Dodge Charger without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2023 Dodge Charger, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Carquest Premium Dorman, and more. Carquest Premium Cooling and Climate Controls start at just $6.79 and boast an impressive 4 stars average rating from customers. With 1,128 customer reviews and counting, our 2023 Dodge Charger Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals and more to make sure your 2023 Dodge Charger is always ready to roll. We’re committed to providing you with everything you need to keep your Charger in top shape, all in one place. Start shopping confidently below for your 2023 Dodge Charger!

Best-Selling HVAC Electrical Parts for 2023 Dodge Chargers

Enhance the driving experience in your Dodge with 1 quality HVAC Electrical Part components, starting at $61.99.

show more show less

from

$61.99

Direct replacement – this humidity sensor is designed to match the fit, function and performance of the original interior humidity sensor on specified vehicle years, makes and models.
Restores functionality – engineered to help restore proper climate control cabin air recirculation mode when the factory interior humidity sensor has failed from electrical malfunction or impact
Durable construction – this sensor is made from quality materials for reliable service
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 2023 Dodge Charger Air Conditioning Parts

Customize your Dodge with 11 Air Conditioning Parts products like AC Compressor Without Clutch, AC Compressor With Clutch, and Expansion Valve and Orifice Tubes, all priced under $699.99.

show more show less

from

$46.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$271.04

Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:

Zinc diffusion layer improves corrosion resistance
Unique fin design to minimize airflow blockage
High performance design reduces the required compressor power
System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
Engineered to Perfection: OE quality engineered for unparalleled performance
Exact Fit: Condensers install with speed and ease
Reduces required compressor power, resulting improved fuel economy
Restores A/C performance to as-new condition
First Time Fit® assures bolt-in replacement; no brackets or adapters
Greater Durability: Pure aluminum construction provides greater resistance for corrosion

from

$127.08

A/C Evaporator

from

$34.50

ABS Speed Sensor

from

$699.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability

from

$393.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance

from

$122.27

The Nissens A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meets or exceeds the vehicle manufacturer specifications.
Utilizes factory style fittings and connectors.
Includes the required o-rings and associated hardware

from

$75.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$40.39

A/C Receiver Drier

from

$18.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

Top Picks for 2023 Dodge Charger Blend Doors

Upgrade Dodge Chargers with top-quality Blend Doors parts, including 2 OEM and aftermarket selections for your 2023 model.

show more show less

from

$32.49

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$44.99

100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.

Product Features:

The heating-ventilation-air-condition (HVAC) air distribution system is designed to control the movement of air in the HVAC air distribution assembly as well as control the interior cabin temperature. Actuator doors which may be mechanically or electrical
100% end-of-line tested to ensure accurate operation providing product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

In-Demand Blower Motor and Related Products for 2023 Dodge Chargers

Select from 2 premium Blower Motor and Related Products parts for your 2023 Dodge Charger, with prices ranging from $115.99 to $139.99.

show more show less

from

$115.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$139.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

Most Sold 2023 Dodge Charger Engine Cooling Parts

Explore our best-selling Dodge parts for the 2023 Charger among 30 OEM and aftermarket options starting from $5.49.

show more show less

from

$269.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$29.49

Meets and/or exceeds OEM standard
Direct-fit replacement for ease of installation
Coated with corrosion and rust inhibitor
100% leak tested

from

$9.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$245.99

Original engine cooling fans often burn out prematurely because they’re under-engineered for extreme duty. This Dorman OE FIX solution features a brushless motor and more durable fan blade to dramatically extend service life under intense use. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

Radiator Fan Assembly With Brushless Motor.
Radiator Fan Assembly: Single, Brushless Motor, OE Fix, Reliable.
Upgraded design – this replacement dual radiator fan assembly features multiple enhancements over original equipment to improve longevity and performance
Ideal for law enforcement – made to endure extreme duty in specific Chrysler and Dodge police vehicle applications

from

$28.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.79

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$10.49

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$41.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$89.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$134.99

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation

from

$25.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$32.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$268.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$204.99

Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
Complete package – assembly is designed with the same materials and components as the original part.
Quality assured – motors are tested in laboratory settings to ensure performance
Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

from

$31.99

This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:

Heavy gauge stainless steel components offer increased reliability and long-lasting durability
Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
AccuSpring Design for stable temperature control and increased cabin comfort

from

$92.99

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$396.99

Dual Fan Assembly With Brushless Motors.
Radiator Fan Assembly: Dual, Brushless Motor, OE Fix, Cost Effective & Reliable.
Upgraded design – this replacement dual radiator fan assembly features multiple enhancements over original equipment to improve longevity and performance
Ideal for law enforcement – made to endure extreme duty in specific Chrysler and Dodge police vehicle applications

from

$155.66

Individually leak tested
Vibration cycle tested
Thermal cycle tested
Wind tunnel tested for optimal radiator core cooling efficiency
Burst pressure and impulse cycle tested for strength
Salt spray tested for corrosion protection
10 foot box “drop test” to ensure packaging protection
30 point fitment inspection on critical dimensions to ensure OE fitment with no modifications necessary

from

$122.99

New Platinum Pro Radiator, For Models With 1 Inch Thick Core

Product Features:

For Models With 1 Inch Thick Core, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$218.24

Optimal air flow prevents vehicle from overheating
Plug and Play jumper harnesses included (where applicable)
Direct replacement for a proper fit every time
All motors are tested prior to final packaging of fan assembly

from

$283.71

DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit? philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:

Fin Pitch – Superior fin waves provide a higher heat transfer.
Flow Configuration – Available in cross-flow and down-flow configurations.
Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

from

$343.92

Without Controller Save time, money and labor with Dorman’s Engine Cooling Fan Assembly. It comes ready to install with the motor, shroud, and blade. Plus, the high fiberglass content offers extra strength and rigidity while improving thermal stability.

Product Features:

Optimal air flow prevents vehicle from overheating
Plug and Play jumper harnesses included (where applicable)
Direct replacement for a proper fit every time
All motors are tested prior to final production of radiator fan assembly

from

$237.54

Radiator

from

$122.87

Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:

Comes with reservoir cap
Level sensor included (where applicable)
Direct replacement for a proper fit every time
Quality tested to ensure trouble-free installation and performance

from

$117.88

THERMOSTAT HOUSING

from

$107.00

THERMOSTAT HOUSING

from

$67.99

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
100% virgin resin material to insure durability
100% leak tested
All-in-one bolt on solution for a complete repair

from

$65.49

Thermostat Housing

from

$57.56

Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:

Direct replacement for a proper fit every time
Hoses slide on for easy installation
High-quality plastic or metal construction
Includes all hardware necessary for a complete repair (where applicable)

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

Top-Rated Cooling and Climate Controls Brands For Your 2023 Dodge Charger

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2023 Dodge Chargers. Below you’ll find some of our best rated Cooling and Climate Controls from Carquest Premium and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2023 Charger start at just $4.49 and are rated as high as 4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2023 Dodge Charger Cooling and Climate Controls

When it comes to maintaining or upgrading your 2023 Dodge Charger, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Cooling and Climate Controls, specifically designed for the 2023 Dodge Charger. With over 19 Carquest Premium brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.79, with an average price of just $126.56. Plus, with over 372 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$393.99

This product is not rated

New Compressor with Clutch, Nippondenso 7SBH17

“”

from
$75.99

This product is not rated

A/C Refrigerant Pressure Sensor

“”

from
$699.99

This product is not rated

New Compressor with Clutch, Nippondenso 7SBH17

“”

Popular Dorman 2023 Dodge Charger Cooling and Climate Controls

Dorman auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2023 Dodge Charger owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2023 Charger, Advance Auto Parts carries a full inventory of 12 Dorman Cooling and Climate Controls. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Dorman Cooling and Climate Controls range from $4.49 to $396.99, plus, with more than 24 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$92.99

This product is not rated

Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

“”

from
$396.99

This product is not rated

Radiator Fan Assembly: Dual, Brushless Motor, OE Fix, Cost Effective & Reliable

“”

from
$4.49

This product is not rated

Chrysler, GM Panel Retainer

“”

FAQs for 2023 Dodge Charger Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2023 Dodge Chargers?

Out of 46 Cooling and Climate Controls that fit 2023 Dodge Chargers, the following parts are the top sellers:

New Water Pump (10661005) – $134.99
HVAC Blend Door Actuator: 1 Piece (10619853) – $32.49
Standard Thermostat:With Seal, 192 Degrees (10321764) – $41.99

What’s the price range for 2023 Dodge Charger Cooling and Climate Controls?

Cooling and Climate Control prices for the 2023 Dodge Charger start at $4.49 and go up to $699.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2023 Dodge Charger?

The average price for Cooling and Climate Controls for the 2023 Dodge Charger is $132.30. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Dodge Charger model years?

Yes, we currently carry Cooling and Climate Controls for 35 model years of Dodge Chargers between 1966 and 2022. Cooling and Climate Controls are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2023 Dodge Charger?

The cheapest 2023 Dodge Charger Cooling and Climate Controls we carry in stock are:

Chrysler, GM Panel Retainer (11910838) – $4.49
Engine Water Pump Gasket (11902647) – $5.49
Radiator Cap: 18 PSI (17110022) – $6.79
THERMOSTAT GASKET (11138667) – $9.79
Radiator Cap: 18 PSI (10049281) – $10.49

What are the top-rated Cooling and Climate Controls that fit the 2023 Dodge Charger?

Out of 1,128 reviews by customers, our 2023 Dodge Charger Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2023 Dodge Charger and their top-rated products:

Engine Cooling Parts
- THERMOSTAT GASKET (11138667) – $9.79
- Radiator Fan Assembly: Single, Brushless Motor, OE Fix, Reliable (11918385) – $245.99
- Radiator (10436790) – $269.99
Blower Motor and Related Products
- THERMOSTAT GASKET (11138667) – $9.79
- Radiator Fan Assembly: Single, Brushless Motor, OE Fix, Reliable (11918385) – $245.99
- Radiator (10436790) – $269.99

What types of Cooling and Climate Controls do you sell for my 2023 Dodge Charger?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2023 Dodge Charger:

Can I get help with 2023 Dodge Charger Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Cooling and Climate Controls and more.

What is your return policy for Dodge Charger Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Dodge Charger Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2023 Dodge Charger Cooling and Climate Controls

Nissens – A/C Condenser (Part No.R1030434194NSS)

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 203 Degrees (Part No.902-3035)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-056)

Felpro – Engine Water Pump Gasket (Part No.11731)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44116)

Carquest Premium – Radiator Cap: 18 PSI (Part No.10234)

CSF – OE Quality Radiator (Part No.G1000219037CSF)

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85107)

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)

Carquest Premium – A/C Filter Drier (Part No.T33340)

Dorman – Chrysler, Ford, GM Panel Retainer, Pack of 3 (Part No.963-058D)

Carquest Premium – A/C New, with Clutch, with 10S17C Compressor (Part No.T98346)

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.58-184)

Carquest Premium – Blower Motor: Without Wheel (Part No.35500)

Carquest Premium – Standard Thermostat: 192 Degrees (Part No.13789)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-526)

Dorman – HVAC Humidity Sensor (Part No.926-369)

Carquest Premium – A/C New, with Clutch, with A590 Compressor (Part No.T58100)

Felpro – THERMOSTAT GASKET (Part No.35974)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-024)

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38844)

Carquest Premium – HVAC Pressure Switch (Part No.ACA1274)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1111)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1051)

Dorman – OE Solutions Auxiliary Cooling Fan Assembly (Part No.G5000719911DOR)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 90 Degree Neck Angle (Part No.902-3020)

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 30 Degree Neck Angle (Part No.902-3022)

Dorman – Coolant Housing/Water Outlet: With Housing, 90 Degree Neck Angle (Part No.902-689)

Dorman – HVAC Humidity Sensor (Part No.926-369)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83376)

Dorman – Chrysler, GM Panel Retainer (Part No.963-056D)

DENSO – First Time Fit A/C Conr (Part No.R1030688028ND)

Santech – A/C Evaporator (Part No.R11302748599SII)

Autopart International Inc – ABS Speed Sensor (Part No.N60302049627API)

Carquest Premium – New Compressor with Clutch, Nippondenso 7SBH17 (Part No.T198375)

Carquest Premium – New Compressor with Clutch, Nippondenso 7SBH17 (Part No.T198340)

Nissens – Nissens A/C Receiver Drier (Part No.R1040400673NSS)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1758)

Autopart International Inc – A/C Receiver Drier (Part No.R10403311357API)

Carquest Premium – A/C Block Expansion Valve (Part No.T39494)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-024)

Carquest Premium – Premium HVAC Blend Door Actuator FAA1224 (Part No.FAA1224)

Carquest Premium – Blower Motor: With Wheel (Part No.75842)

Dorman – BMR (Part No.984-498)

Carquest Premium – Radiator (Part No.813157)

Carquest Premium – Coolant Housing/Water Outlet (Part No.85341)

Felpro – THERMOSTAT GASKET (Part No.35974)

Dorman – Radiator Fan Assembly: Single, Brushless Motor, OE Fix, Reliable (Part No.621-526XD)

Carquest Premium – Engine Coolant HD Thermostat: With Seal, 203 Degrees (Part No.48792)

Carquest Premium – Radiator Cap: 18 PSI (Part No.10234)

Carquest Premium – Radiator Cap: 18 PSI (Part No.10334)

Carquest Premium – Standard Thermostat:With Seal, 192 Degrees (Part No.48799)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5110)

Carquest Premium – New Water Pump (Part No.T5140)

Carquest Premium – Integrated Housing Thermostat-203 Degrees w/ Seal (Part No.49549)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.48798)

Carquest Premium – Radiator (Part No.813158)

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-526)

Motorad UltraStats – Thermostat: With Seal, 203 Degrees (Part No.5416-203)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-380)

Dorman – Radiator Fan Assembly: Dual, Brushless Motor, OE Fix, Cost Effective & Reliable (Part No.620-039XD)

CSF – Premium Plastic Tank Radiator with Aluminum Core: For Optimal Engine Performance (Part No.G1000392012CSF)

KAI – Radiator (Part No.RAD13157)

Dorman – OE Solutions Auxiliary Cooling Fan Assembly (Part No.G5000719911DOR)

DENSO – First Time Fit Radiator: Reliable Performance and OE-Quality Construction (Part No.G1000923053ND)

Dorman – Dorman Auxiliary Fan Assembly (Part No.G5000439478DOR)

Autopart International Inc – Radiator (Part No.G10001921278API)

Dorman – OE Solutions Coolant Reservoir – Expansion Tank (Part No.G1030829422DOR)

Worldpac – THERMOSTAT HOUSING (Part No.G4010657111GAT)

Worldpac – THERMOSTAT HOUSING (Part No.G40104192542ANA)

Carquest Premium – Thermostat Housing: Gasket Included (Part No.85943)

Gates – Thermostat Housing (Part No.G4010221087GAT)

Dorman – Engine Coolant Thermostat Housing (Part No.G4010960305DOR)

Felpro – Engine Water Pump Gasket (Part No.36071)