from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$97.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$167.20

ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:

Both upper and lower intake manifolds with matching gaskets sets available.
Only ACDelco and GM offer complete later model GM coverage.
Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)

from

$48.49

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.

from

$71.99

MAHLE gaskets provide world class sealing products trusted by OEMs and Technicians around the globe.

Product Features:

MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$24.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$92.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$70.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$39.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair
Includes all parts needed to complete the repair

from

$11.79

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$31.99

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$362.99

GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps provide air flow for proper fuel/air mixture
Allows for a quick throttle response
Assists in cold engine starts
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$274.09

The Hitachi Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

OE Manufactured assemblies include Throttle Position sensors
Controls the volume of air flowing into the engine
Improves engine power, fuel economy and emissions performance

from

$251.99

Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:

Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
Hitachi is a Tier 1 OE supplier for Throttle bodies
100% NEW, never remanufactured
Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
Powerful electric motor provides quick and accurate response for optimal engine efficiency
Electronics are sealed to prevent contamination that may result in inaccurate readings
Detailed manufacturing tracking system using QR codes

from

$153.99

GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps provide air flow for proper fuel/air mixture
Allows for a quick throttle response
Assists in cold engine starts
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$317.99

When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.

Product Features:

Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge.
Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

from

$234.99

Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.

Product Features:

Upgraded design – this plug-and-play replacement throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures
New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

from

$186.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

100% NEW, never remanufactured, which maximizes performance and extends service life
Undergoes extensive testing to ensure quality and reliability out of the box
Matches OE response time for peak performance on drive by wire systems
All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

from

$222.06

FI Throttle Body

from

$156.99

Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:

Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
Each unit is guaranteed to function like the original.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$201.99

When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.

Product Features:

Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures.
New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge.
Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

from

$252.99

Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:

Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
Hitachi is a Tier 1 OE supplier for Throttle bodies
100% NEW, never remanufactured
Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
Powerful electric motor provides quick and accurate response for optimal engine efficiency
Electronics are sealed to prevent contamination that may result in inaccurate readings
Detailed manufacturing tracking system using QR codes

from

$234.99

Product Features:

New construction – 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$209.99

Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:

Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
Hitachi is a Tier 1 OE supplier for Throttle bodies
100% NEW, never remanufactured
Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
Powerful electric motor provides quick and accurate response for optimal engine efficiency
Electronics are sealed to prevent contamination that may result in inaccurate readings
Detailed manufacturing tracking system using QR codes

from

$420.11

The ACDelco GM Original Equipment Fuel Injection Throttle Body is a GM-recommended replacement for your vehicle’s original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. This original equipment fuel injection throttle body has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$164.99

Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:

Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
Each unit is guaranteed to function like the original.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$194.52

FI Throttle Body

from

$167.99

All CARDONE 100% New Electronic Throttle Bodies are guaranteed to fit and function like the original due to our proprietary engineering standards. Each unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match O.E., ensuring accurate air flow in all driving conditions and peak engine performance.

Product Features:

Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.
100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance.
Each unit is guaranteed to fit and function like the original.

2023 Chevrolet Express 2500 Air Intakes

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97291)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98016 T)

ACDelco – GM Original Equipment Intake Manifold Gasket Set (Part No.A8043431450ACD)

Victor Reinz – Intake Manifold Gasket Set: Multi Piece Set (Part No.11-10257-01)

MAHLE Original – Engine Intake Manifold Gasket Set (Part No.MS16340)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97402-1)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98002 T)

MAHLE Original – Intake Manifold Installation Kit (Part No.MIS19403)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90131-2)

GM Genuine Parts – Fuel Injection Throttle Body O-Ring (Part No.12639086)

GM Genuine Parts – SEAL,THROT BODY (Part No.217-2424)

GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.217-3151)

Hitachi – Electronic Throttle Body (ETB) (Part No.C7000934911HIT)

Hitachi – Electronic Throttle Body: New (Part No.ETB0019)

GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.12676296)

Dorman – Electronic Throttle Body: New (Part No.977-014)

Dorman – Electronic Throttle Body (Part No.977-376)

Tech Smart – Fuel Injection Throttle Body (Part No.S20063)

Cardone – FI Throttle Body (Part No.C7000887541CAR)

Cardone – Electric Throttle Body: Remanufactured (Part No.67-3008)

Dorman – Electronic Throttle Body: New (Part No.977-316)

Hitachi – Electronic Throttle Body: New (Part No.ETB0067)

Dorman – Electronic Throttle Body (Part No.977-858)

Hitachi – Electronic Throttle Body: New (Part No.ETB0025)

ACDelco – GM Original Equipment Fuel Injection Throttle Body (Part No.C7000934911ACD)

Cardone – Electric Throttle Body: Remanufactured (Part No.67-3013)

Hitachi – FI Throttle Body (Part No.C7000430622HIT)

Cardone New – New Fuel Injection Throttle Body (Part No.6E-3008)

GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.12676296)

GM Genuine Parts – Fuel Injection Throttle Body O-Ring (Part No.12639086)

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97402)

Mahle – Intake Manifold Gask (Part No.A8040580030MAH)