2023 Audi A3 Quattro Engine Parts
Find Your Specific 2023 Audi A3 Quattro Engine Parts
Below you will find various in-demand Audi Engine Parts, components and accessories for your 2023 A3 Quattro. Advance Auto Parts has popular A3 Quattro parts like Camshafts, Engine Timing Parts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other A3 Quattro model years including
2012,
2013,
2015,
2016,
2017,
2018,
2019,
2020,
2022 and more. Select a category of 2023 Audi A3 Quattro Engine Parts below and start saving instantly.
Popular 2023 Audi A3 Quattro Engine Parts Categories
Essential Engine Parts for 2023 Audi A3 Quattros
MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)
from
$6.67
FUEL PUMP TANK SEAL
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More
Corteco – Crankshaft Seal (Part No.A8060414158CFW)
from
$10.19
Crankshaft Seal
Dayco – Premium Timing Belt, 23.75 Inch With 67 Round Tooth, With Flat Tip (Part No.95352)
from
$24.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- Timing marks are applied on the belt for proper installation
Dayco – Premium Timing Belt, 10.63 Inch With 54 Round Tooth, With Grooved Tip (Part No.95348)
from
$16.49
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely
Kolbenschmidt – Cam Follower (Part No.A4010420928KS)
from
$14.35
Cam Follower
Tech Smart – Fuel Pump Camshaft Follower (Part No.T48001)
from
$70.99
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.
Product Features:
See More
Product Features:
- OE-matching metallurgy and low-friction diamond-like coating (DLC) prevent premature wear, which can lead to catastrophic failure of fuel pump, camshaft, and/or cylinder head
- Recommended replacement on all vehicles over 70k miles.
- Extensively tested to OE specifications to ensure superior performance and long service life
- All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
INA – Camshaft Follower (Part No.A4010314568INA)
from
$11.58
Camshaft Follower
KS – Valve Keeper (Part No.A407084736KS)
from
$3.14
Valve Keeper
TRW – Valve Keeper (Part No.A4070774061TRW)
from
$3.14
Valve Keeper
Febi – Balance Shaft Chain (Part No.A5026413890FEB)
from
$76.60
Balance Shaft Chain
Elring – Oil Cooler Gasket (Part No.A6072451394ELR)
from
$8.82
Oil Cooler Gasket
Elring – Elring Oil Cooler Seal (Part No.A631088467ELR)
from
$9.12
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.
Product Features:
See More
Product Features:
- Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
- Various designs specifically adapted to the area of application ensure excellent functionality and performance
- High-performance FPM guarantees optimum leak tightness
Whiteline – Trans Mount Insert (Part No.KDT968)
from
$40.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new purchase .
Anchor – Engine Mount: Rear, 1 Piece (Part No.9920)
from
$53.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 04-18; VW 06-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2021
- Weight approx: 1 Lbs
- ENGINE CRADLE
- HEIGHT: 1.22 INCH / 31 MM
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Whiteline – Engine Torque Arm Bushing (Part No.KDT914)
from
$40.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Corteco – Transmission Mount (Part No.J6000179402CFW)
from
$144.62
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise Vibration Control Brochure
Anchor – Engine Mount: Rear, 1 Piece (Part No.9919)
from
$43.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-23; VW 15-23;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2023
- Weight approx: 1 Lbs
- ENGINE CRADLE
- PART GROUP: 9918, 9919
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Anchor – Engine Mount: Right, 1 Piece (Part No.9985)
from
$111.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-20; VW 15-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2021
- Weight approx: 3 Lbs
- HYDRAULIC
- WITHOUT ACCESSORY STANDOFFS
Energy Suspension – MotorMt (Part No.15.1107G)
from
$30.99
MotorMt
Anchor – Engine Mount: Rear, 1 Piece (Part No.9263)
from
$34.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-13; SEAT 08-19; VW 05-18;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2005-2019
- Weight approx: 1 Lbs
- ENGINE CRADLE
- HEIGHT: 1.42 INCH / 36 MM
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
Energy Suspension – MotorMt (Part No.15.1107R)
from
$29.99
MotorMt
Whiteline – Engine Pitch Mount Bushing (Part No.KDT975)
from
$233.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Autopart International Inc – Engine Mount (Part No.A70002006364API)
from
$35.06
Engine Mount
Anchor – Engine Mount: Rear, 1 Piece (Part No.9260)
from
$59.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 04-18; SEAT 08-13; VW 05-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2021
- Weight approx: 1 Lbs
- ENGINE CRADLE
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: NO THREADS
Anchor – Engine Mount: Right, 1 Piece (Part No.9092)
from
$112.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-15; VW 98-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1998-2021
- Weight approx: 5 Lbs
- HYDRAULIC
Whiteline – Engine Pitch Mount Bushing (Part No.KDT977)
from
$160.99
The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Anchor – Engine Mount: Rear, 1 Piece (Part No.9918)
from
$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-23; VW 15-23;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2023
- Weight approx: 1 Lbs
- ENGINE CRADLE
- PART GROUP: 9918, 9919
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: NO THREADS
Upgrade your 2023 Audi A3 Quattro with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 2023 Audi A3 Quattro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Engine Parts are key to keeping your A3 Quattro functioning at its best. At Advance Auto Parts, we offer a wide selection of 11 Engine Parts for the 2023 Audi A3 Quattro, designed to meet your needs without breaking the bank.
From
Camshaft
replacements to
Engine Timing Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2023 Audi A3 Quattro at great prices.
Our Engine Parts inventory for this model
ranges from just $3.14 to $113.99, with
an average price of $27.95.
Our 11 Engine Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2023 Audi A3 Quattro without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2023 Audi A3 Quattro is always ready to roll. We’re committed to providing you with everything you need to keep your A3 Quattro in top shape, all in one place.
Start shopping confidently below for your 2023 Audi A3 Quattro!
Best-Selling Camshafts for 2023 Audi A3 Quattros
Enhance the driving experience in your Audi with 2 quality Camshaft components, starting at $11.58.
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More
INA – Camshaft Follower (Part No.A4010314568INA)
from
$11.58
Camshaft Follower
Most Popular 2023 Audi A3 Quattro Engine Timing Parts
Customize your Audi with 3 Engine Timing Parts products
like Timing Belts,
Timing Cover Seals, and
Balance Shaft Chain Tensioners, all
priced under $27.91.
BBR Automotive – Balance Shaft Chain (Part No.A50263110048BBR)
from
$27.91
Balance Shaft Chain
Dayco – Premium Timing Belt, 23.75 Inch With 67 Round Tooth, With Flat Tip (Part No.95352)
from
$24.99
Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.
Product Features:
See More
Product Features:
- Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
- Offers noise reduction and minimum dimensional tolerances for precise valve timing
- Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
- Timing marks are applied on the belt for proper installation
Corteco – Crankshaft Seal (Part No.A8060414158CFW)
from
$10.19
Crankshaft Seal
Top Picks for 2023 Audi A3 Quattro Engine Mounts
Upgrade Audi A3 Quattros with top-quality Engine Mounts parts, including 2 OEM and aftermarket selections for your 2023 model.
Anchor – Engine Mount: Rear, 1 Piece (Part No.9918)
from
$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-23; VW 15-23;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2023
- Weight approx: 1 Lbs
- ENGINE CRADLE
- PART GROUP: 9918, 9919
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: NO THREADS
Anchor – Engine Mount: Rear, 1 Piece (Part No.9919)
from
$43.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 15-23; VW 15-23;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2023
- Weight approx: 1 Lbs
- ENGINE CRADLE
- PART GROUP: 9918, 9919
- BOLTS THROUGH TORQUE STRUT REAR END
- BOLT HOLE: THREADED
In-Demand Valve Cover and Cylinder Heads for 2023 Audi A3 Quattros
Select from 2 premium Valve Cover and Cylinder Heads parts for your 2023 Audi A3 Quattro, with prices ranging from $3.14 to $3.14.
TRW – Valve Keeper (Part No.A4070774061TRW)
from
$3.14
Valve Keeper
KS – Valve Keeper (Part No.A407084736KS)
from
$3.14
Valve Keeper
Most Sold 2023 Audi A3 Quattro Engine Gaskets and Seals
Explore our best-selling Audi parts for the 2023 A3 Quattro among 2 OEM and aftermarket options starting from $6.67.
Elring – Oil Cooler Gasket (Part No.A6072451394ELR)
from
$8.82
Oil Cooler Gasket
MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)
from
$6.67
FUEL PUMP TANK SEAL
FAQs for 2023 Audi A3 Quattro Engine Parts
Which Engine Parts are best-sellers for 2023 Audi A3 Quattros?
Out of 11 Engine Parts that fit 2023 Audi A3 Quattros, the following parts are the top sellers:
- Valve Keeper (11999138) – $3.14
- Valve Keeper (10728889) – $3.14
- FUEL PUMP TANK SEAL (11262605) – $6.67
What’s the price range for 2023 Audi A3 Quattro Engine Parts?
Engine Part prices for the 2023 Audi A3 Quattro start at $3.14 and go up to $113.99 for the most premium parts.
What’s the average price of a Engine Part for a 2023 Audi A3 Quattro?
The average price for Engine Parts for the 2023 Audi A3 Quattro is $27.95. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Audi A3 Quattro model years?
What are the cheapest Engine Parts for my 2023 Audi A3 Quattro?
The cheapest 2023 Audi A3 Quattro Engine Parts we carry in stock are:
- Valve Keeper (11999138) – $3.14
- Valve Keeper (10728889) – $3.14
- FUEL PUMP TANK SEAL (11262605) – $6.67
- Oil Cooler Gasket (11925663) – $8.82
- Crankshaft Seal (11685759) – $10.19
What types of Engine Parts do you sell for my 2023 Audi A3 Quattro?
As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2023 Audi A3 Quattro:
Can I get help with 2023 Audi A3 Quattro Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Engine Parts and more.
What is your return policy for Audi A3 Quattro Engine Parts?
Advance Auto Parts keeps returns simple. For new Audi A3 Quattro Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
