2022 Toyota 4Runner Fuel and Emissions Systems

Name: Fuel Tank Cleaning Kit
Brand: Delphi
SKU: FC01
Price: 12.49 USD

Below you will find various in-demand Toyota Fuel and Emissions Systems, components and accessories for your 2022 4Runner. Advance Auto Parts has popular 4Runner parts like Oxygen Sensors, Fuel Pumps, Air Flow Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other 4Runner model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2023 and more. Select a category of 2022 Toyota 4Runner Fuel and Emissions Systems below and start saving instantly.

Popular 2022 Toyota 4Runner Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

Fuel Injection Throttle Control Actuator Modules

Pressure Regulators

Ambient Air Temperature Sensors

Fuel Injector Seal Kits

Fuel Injector Gaskets

Fuel Injector O-rings

Fuel Injection Pressure Regulator O-Rings

Fuel Cap Tester Adapters

Secondary Air Injection Pump Hose Gasket

Essential Fuel and Emissions Systems for 2022 Toyota 4Runners

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$105.12

Denso Universal First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$47.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$4.98

Fuel Inject Cushion Ring

from

$4.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$207.61

The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:

OE-Equivalent and direct fit for easy installation.
OE connections and fittings.
The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
Ultra-high balanced armature to minimize noise and vibration.
High pressure check valve provides superior hot fuel handling characteristics.
The brushes are designed for durability, efficiency, and low-resistance operation.
High quality relief valve to protect the fuel delivery system.

from

$115.99

CARQUEST enhanced electric in-tank fuel pumps are 100% quality tested and are designed to deliver quiet operation, industry-leading performance and durability. All CARQUEST pumps meet or exceed OE specifications in fit, form and function.Optimized, precision-wound armature assembly for increased performance

from

$4.57

The Mahle Idle Control Valve Gasket is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Original equipment design and quality
Utilizes OE equivalent or better materials
Meets or exceeds OEM specifications

from

$3.29

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$156.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$61.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$2.30

Air Pipe Fitting Gas

from

$2.73

Air Pipe Fitting Gas

from

$171.99

DENSO’s innovative designs reduces the size and weight which allows for easy installation. Glass film coated sensing elements reduces contamination exposure and improves reliability.

Product Features:

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$160.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$209.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$108.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$602.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$519.47

Carbon Canister

from

$4.75

Fuel Injector O-Ring

from

$1.85

Fuel Injector O-Ring

from

$2.16

Fuel Injector O Ring

from

$1.54

NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.

from

$108.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$101.44

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$339.99

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.

Product Features:

Reduces Throttle Response Time
Improved Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$339.99

Reduces Throttle Response Time
Improved Acceleration
Easy To Install
Instant Increase In Horsepower And Torque

Upgrade your 2022 Toyota 4Runner with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2022 Toyota 4Runner, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 4Runner functioning at its best. At Advance Auto Parts, we offer a wide selection of 27 Fuel and Emissions Systems for the 2022 Toyota 4Runner, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2022 Toyota 4Runner at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.85 to $1,037.99, with an average price of $183.99. Our 27 Fuel and Emissions Systems in stock come from 12 trusted brands, so you’re sure to find the right part for your 2022 Toyota 4Runner without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2022 Toyota 4Runner, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium, and more. Carquest Premium Fuel and Emissions Systems start at just $4.99 and boast an impressive 4 stars average rating from customers. With 8 customer reviews and counting, our 2022 Toyota 4Runner Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2022 Toyota 4Runner is always ready to roll. We’re committed to providing you with everything you need to keep your 4Runner in top shape, all in one place. Start shopping confidently below for your 2022 Toyota 4Runner!

Best-Selling Oxygen Sensors for 2022 Toyota 4Runners

Enhance the driving experience in your Toyota with 3 quality Oxygen Sensor components, starting at $91.99.

show more show less

from

$181.83

AIR FUEL RATIO SENSO

from

$156.71

Oxygen Sensor

from

$91.99

Most Popular 2022 Toyota 4Runner Fuel Pumps

Customize your Toyota with 6 Fuel Pumps products like Fuel Pumps and Fuel Cap Tester Adapters, all priced under $1,037.99.

show more show less

from

$483.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$1037.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$266.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$224.22

Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. Not only do these pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. That’s an important consideration when choosing a replacement fuel pump. You can install Bosch Turbine Fuel Pumps with complete confidence. They’re nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation.

Product Features:

Superior turbine pump design virtually eliminates fuel pulsation
Bosch impeller ring provides smooth fuel flow
Precision, spin-balanced and polymer-encased armature reduces noise and vibration
Premium carbon brushes, utilizing advanced materials provides longer, reliable service life
Noise suppression coil virtually eliminates radio frequency interference

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 2022 Toyota 4Runner Air Flow Sensors

Upgrade Toyota 4Runners with top-quality Air Flow Sensors parts, including 3 OEM and aftermarket selections for your 2022 model.

show more show less

from

$313.69

DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$230.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$59.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

In-Demand Fuel Tanks for 2022 Toyota 4Runners

Select from 1 premium Fuel Tanks parts for your 2022 Toyota 4Runner.

show more show less

from

$12.49

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

Most Sold 2022 Toyota 4Runner Fuel Injectors

Explore our best-selling Toyota parts for the 2022 4Runner among 12 OEM and aftermarket options starting from $1.85.

show more show less

from

$105.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$169.99

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$222.17

Denso manufactures an air mass sensor that is engineered to exact OEM specifications for quality, fit and performance. The Denso Air Mass Sensor provides exceptional reliability by incorporating a platinum coated sensing element with a glass film to protect the sensor from contaminants. Denso prevents errors caused by air pulsations produced in the intake air pipe by integrating the control circuit within the top of the air flow sensor so that only the small bypass passage structure with the sensing element is inserted into the intake air pipe, resulting in higher detection accuracy and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$209.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$136.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$339.99

Reduces Throttle Response Time
Improved Acceleration
Easy To Install
Instant Increase In Horsepower And Torque

from

$65.99

Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$29.59

Fuel Injector O-Ring

from

$4.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$4.09

FI Throttle Body Mou

from

$1.85

Fuel Injector O-Ring

Top-Rated Fuel and Emissions Systems Brands For Your 2022 Toyota 4Runner

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2022 Toyota 4Runners. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2022 4Runner start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2022 Toyota 4Runner Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2022 Toyota 4Runner, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 2022 Toyota 4Runner. With over 7 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $110.28. Plus, with over 2 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$65.99

This product is not rated

Remanufactured Fuel Injector

“”

from
$483.99

This product is not rated

Fuel Pump Module Assembly M2542523: Fuel Pump, Sending Unit and Strainer

“”

from
$59.99

This product is not rated

Ambient Air Temperature Sensor

“”

FAQs for 2022 Toyota 4Runner Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2022 Toyota 4Runners?

Out of 27 Fuel and Emissions Systems that fit 2022 Toyota 4Runners, the following parts are the top sellers:

Fuel Tank Cleaning Kit (11692237) – $12.49
Mass Air Flow Sensor (10115668) – $169.99
First Time Fit Air Mass Sensor (11648094) – $222.17

What’s the price range for 2022 Toyota 4Runner Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2022 Toyota 4Runner start at $1.85 and go up to $1,037.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2022 Toyota 4Runner?

The average price for Fuel and Emissions Systems for the 2022 Toyota 4Runner is $183.99. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Toyota 4Runner model years?

Yes, we currently carry Fuel and Emissions Systems for 40 model years of Toyota 4Runners between 1984 and 2024. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 2022 Toyota 4Runner?

The cheapest 2022 Toyota 4Runner Fuel and Emissions Systems we carry in stock are:

Fuel Injector O-Ring (10740166) – $1.85
Air Pipe Fitting Gas (12064552) – $2.30
FI Throttle Body Mou (12589340) – $4.09
Fuel Injector Seal Kit (11692578) – $4.99
Fuel Tank Cleaning Kit (11692237) – $12.49

What types of Fuel and Emissions Systems do you sell for my 2022 Toyota 4Runner?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2022 Toyota 4Runner:

Can I get help with 2022 Toyota 4Runner Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Fuel and Emissions Systems and more.

What is your return policy for Toyota 4Runner Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Toyota 4Runner Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2022 Toyota 4Runner Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

DENSO – Universal Oxygen Sensor (Part No.C5010100822ND)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA2088)

Ishino – Fuel Inject Cushion Ring (Part No.C1011144330ISH)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 71859)

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000338218ND)

Spectra Premium – Fuel Pump (Part No.SP1129)

Mahle – Idle Control Valve Gasket (Part No.C4063343675MAH)

Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-13400-00)

Carquest – Fuel Injector (Part No.67248)

Carquest Premium – Reman Multi Port Fuel Injector (Part No.A212-2514)

Original Equipment – Air Pipe Fitting Gas (Part No.B7043768897OEA)

Kibi Gaskets – Air Pipe Fitting Gas (Part No.B7043768764KIB)

DENSO – Mass Air Flow Sensor (Part No.197-6030)

Delphi – Mass Air Flow Sensor (Part No.AF10135)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10683)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1360)

Carquest Premium – Vapor Canister (Part No.CPN2274)

Aisan – Carbon Canister (Part No.B7070568026AIS)

Ishino – Fuel Injector O-Ring (Part No.C1012184281ISH)

Ishino – Fuel Injector O-Ring (Part No.C1012184276ISH)

Ishino Stone – Fuel Injector O Ring (Part No.C1012184287ISH)

Nippon Reinz – Fuel Injector O-Ring (Part No.C1012262175NRZ)

DENSO – Oxygen Sensor: 4 Wire, 10.63" Long, Heated, Exact Fit (Part No.234-4162)

Bosch – Bosch Oxygen Sensor (Part No.C501089592BOS)

aFe POWER – Sprint Booster (Part No.77-16506)

aFe POWER – Sprint Booster (Part No.77-16509)

Worldpac – AIR FUEL RATIO SENSO (Part No.C50152205205NTK)

DENSO – Oxygen Sensor (Part No.C50101559360ND)

DENSO – Oxygen Sensor (Part No.234-8005)

Carquest Premium – Fuel Pump Module Assembly M2542523: Fuel Pump, Sending Unit and Strainer (Part No.M2542523)

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1763)

Delphi – Electric Fuel Pump and Strainer Set: 12V, With 2 Male Blade Terminals, External Strainer (Part No.FE0554)

Bosch – Original Equipment Replacement Electric Fuel Pump (Part No.E30091522480BOS)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015690062ND)

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 9.92" Long, Heated, Exact Fit (Part No.234-9143)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA2054)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6225)

DENSO – Mass Air Flow Sensor (Part No.197-6160)

DENSO – First Time Fit Air Mass Sensor (Part No.B3150834957ND)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10683)

Delphi – Mass Air Flow Sensor (Part No.AF10347)

Felpro – UPPER INTAKE MANIFOLD GASKET/ PLENUM GASKET (Part No.MS 97236)

aFe POWER – Sprint Booster (Part No.77-16509)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3814)

Mahle – Fuel Injector O-Ring (Part No.C1013982489MAH)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS041)

Kibi Gaskets – FI Throttle Body Mou (Part No.C7001268569KIB)

Ishino – Fuel Injector O-Ring (Part No.C1012184276ISH)