2022 Ram 3500 Exhaust System Kits

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

The MagnaFlow Ram Black DPF Series 17070 brings the dyno-proven performance and deep resonating sound that we’re known for to your 6.7L Ram in premium kit that includes tailpipe with a premium black powder-coated finish. This Ram exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 4in. diameter main piping that ends in a Dual Same Side Behind Passenger Rear Tire exit with 5in. Black Coated Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. Exhaust kit 17070’s filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

PRO Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

“Gain 22% more exhaust flow for improved performance and sound. This DPF-back exhaust is 100% hand MIG-welded, mandrel bent, 4″” 409 stainless steel tubing for strength and durability and is finished off with a 5″” intercooled, polished exhaust tip to reduce EGT’s. This system utilizes factory mounting locations, and includes high quality hardware for a quick, hassle-free installation. Stainless Steel Construction This DPF-Back is constructed of 100% hand MIG-welded, mandrel bent, 4″” 409 stainless steel tubing for strength and durability. 5″” Diameter Exhaust Tip: Finishing off this exhaust is a 5″” diameter slash cut, stainless steel tip with intercooling vents to reduce EGT’s at the tailpipe and are badged with laser-cut aFe POWER plates riveted on. Installation is a Snap This system uses factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 degree sealing surface. Flow and Performance This exhaust system is constructed of 4″” mandrel-bent 409 stainless steel tubing for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.”

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

“Gain 22% more exhaust flow for improved performance and sound. This DPF-back exhaust is 100% hand MIG-welded, mandrel bent, 4″” 409 stainless steel tubing for strength and durability and is finished off with a 5″” intercooled, polished exhaust tip to reduce EGT’s. This system utilizes factory mounting locations, and includes high quality hardware for a quick, hassle-free installation. Stainless Steel Construction This DPF-Back is constructed of 100% hand MIG-welded, mandrel bent, 4″” 409 stainless steel tubing for strength and durability. 5″” Diameter Exhaust Tip: Finishing off this exhaust is a 5″” diameter slash cut, stainless steel tip with intercooling vents to reduce EGT’s at the tailpipe and are badged with laser-cut aFe POWER plates riveted on. Installation is a Snap This system uses factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 degree sealing surface. Flow and Performance This exhaust system is constructed of 4″” mandrel-bent 409 stainless steel tubing for maximum flow and durability. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.”

“Interested in a new exhaust system for your 6.7L Cummins? Check out the Large Bore-HD DPF-Back exhaust system by aFe. This system is constructed from 5″” mandrel-bent 409 stainless steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. Also included in this exhaust system is a massive 7″” wrinkle-black powder-coated 304 stainless steel tip with a laser-cut stainless steel aFe power badge. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value.”

“aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″” MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″” Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 4″” diameter black 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.”

The MagnaFlow Black Series Filter-Back Performance Exhaust System 17071 brings the dyno-proven performance and deep resonating sound that we’re known for to your 6.7L Ram in premium kit that includes tailpipe with a premium black powder-coated finish. This Ram exhaust system is designed to produce Mild interior and Moderate exterior sound levels thanks to clever tuning of its fast-flowing mandrel bent 5in. diameter main piping that ends in a Single Passenger Side Rear exit with 6in. Black Coated Welded-On Single Wall Angle Cut Rolled Edge tips. Exhaust kit 17071’s filter-back layout features a direct-fit, easy-to-install design and is made of strong, corrosion-resistant stainless steel. It is produced using CNC precision robotic manufacturing techniques and backed by MagnaFlow’s 1-year limited finish warranty and limited construction warranty.

“Introducing the new Flow FX Cat-back exhaust system for 2003-2012 Dodge Ram/RAM 2500/3500 trucks and 2006-2008 Dodge Ram 1500 Mega Cab trucks with the 5.7L Hemi engine. This stainless steel performance exhaust system starts with a large 3-inch mandrel-bent tube flowing into the Flow FX “”straight-through”” performance muffler. The mandrel-bent tailpipe exits behind the passenger side rear tire and is finished off with a large 4.50-inch black ceramic coated exhaust tip embossed with the Flowmaster name. This system creates a deep powerful sound outside the vehicle with a moderate tone inside the cab and utilizes the factory hanger locations. Includes all necessary parts, hardware and detailed instructions for an easy installation you can do at home. Notes: Fits all 2/4 wheel drives and all wheelbases.”

“aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″” MIG-welded, mandrel bent 409 stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″” Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 4″” diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.”

“The Large Bore HD Performance DPF-Back exhaust features 4″” 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.”

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19493 offers enthusiasts an easy way to upgrade their Ram 6.4L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 6.4L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19493 is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3.5in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.