2022 Nissan Murano Engine Cooling Parts

Essential 2022 Nissan Murano Engine Cooling Parts

NTK – Engine Coolant Temperature Sensor (Part No.EF0107)

Engine Coolant Temperature Sensor

from

$34.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10064)

Engine Coolant Temperature Sensor

from

$29.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Motorad – Integrated Thermostat Housing: With Gasket, 180 Degrees (Part No.662-180)

Integrated Thermostat Housing: With Gasket, 180 Degrees

from

$40.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 180 Degrees (Part No.902-5125)

Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 180 Degrees

from

$50.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

AISIN – Engine Coolant Thermostat Gasket (Part No.G4031550913ASC)

Engine Coolant Thermostat Gasket

from

$6.80
The AISIN Engine Coolant Thermostat Gasket is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Felpro – THERMOSTAT GASKET (Part No.35769)

THERMOSTAT GASKET

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813039)

Radiator: With Transmission Oil Cooler

from

$309.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813532)

Radiator: With Transmission Oil Cooler

from

$227.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

AISIN – OE Replacement Water Pump (Part No.G3000450963ASC)

OE Replacement Water Pump

from

$152.84
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1470)

Engine Water Pump: New, Gasket/Seals Included

from

$95.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

NOK – Water Pump Gasket (Part No.G3040477059NOK)

Water Pump Gasket

from

$5.36
Water Pump Gasket

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Beck/Arnley – Water Pump Gasket (Part No.039-4127)

Water Pump Gasket

from

$7.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Metal where applicable
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Felpro – Engine Water Pump Gasket (Part No.35754)

Engine Water Pump Gasket

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Beck/Arnley – Water Outlet Gasket (Part No.039-0124)

Water Outlet Gasket

from

$5.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber or composite material designed to withstand high heat conditions
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54245)

Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack

from

$10.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Radiator Cap: 20 PSI (Part No.10267)

Radiator Cap: 20 PSI

from

$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Radiator Cap (Part No.54237)

Radiator Cap

from

$22.99
This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles.
  • Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Radiator Cap: 18 PSI (Part No.10265)

Radiator Cap: 18 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Radiator Cap: 13 PSI (Part No.10227)

Radiator Cap: 13 PSI

from

$11.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Stant – Radiator and Reservoir Caps (Part No.G101032815STN)

Radiator and Reservoir Caps

from

$8.06
Stant offers a wide variety of radiator cap styles and applications for U.S. and import cars, light trucks, HD trucks, racing, off-road and ag equipment. In addition to the standard OE line of caps, a unique line of high- and low- pressure racing caps are available for high performance vehicles. Additionally, the Lev-R-Vent caps are designed with a lever release to safely release pressure for quicker cooling. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • The SWIV-EL design allows the cap to be installed and removed much easier than conventional radiator caps.
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
  • The Lev-R-Vent features a patented lever release to safely release pressure for quicker cooling.
See More

Carquest Premium – Radiator Cap: 13 PSI (Part No.10327)

Radiator Cap: 13 PSI

from

$18.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Ishino Stone – Water Pipe O-Ring (Part No.G2026550536ISH)

Water Pipe O-Ring

from

$2.33
Water Pipe O-Ring

2022 Nissan Murano Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2022 Nissan Murano. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 17 different Engine Cooling Parts in our inventory ranging from $2.33 to $227.99. That means you can find the exact parts or products you need to keep that 2022 Nissan Murano running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 2022 Nissan Murano. Carquest Premium, FELPRO, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2022 Nissan Murano, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2022 Nissan Murano rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2022 Nissan Murano Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 Nissan Murano demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Murano the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Carquest Premium Engine Cooling Parts

We carry Carquest Premium parts in our stock across Radiator Caps categories, plus more. For a 2022 Nissan Murano, our most popular Carquest Premium Engine Cooling Parts include:
Radiator Cap: 18 PSI
from $14.99
(2)
Radiator Cap: 18 PSI
Radiator Caps

Top 2022 Nissan Murano Engine Cooling Parts from Felpro

Felpro products are another trusted brand when it comes to Engine Cooling Parts for your 2022 Nissan Murano. Popular Felpro parts include:
Engine Coolant Outlet Gasket
from $3.49
(16)
Engine Coolant Outlet Gasket
Thermostat and Water Outlet Gaskets
Engine Water Pump Gasket
from $4.49
(1)
Engine Water Pump Gasket
Water Pump Gaskets

FAQs for 2022 Nissan Murano Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2022 Nissan Murano?

Out of 17 Engine Cooling Parts for the 2022 Nissan Murano, the most popular in our inventory are:
Coolant Temperature Sensor
from $29.99
This product is not rated
Coolant Temperature Sensor
Coolant Temperature Sensors
Engine Coolant Temperature Sensor
from $34.99
This product is not rated
Engine Coolant Temperature Sensor
Coolant Temperature Sensors
Water Outlet Gasket
from $5.99
This product is not rated
Water Outlet Gasket
Thermostat Gaskets