2022 Chrysler 300 Engine Cooling Parts

Essential 2022 Chrysler 300 Engine Cooling Parts

Carquest Premium – Radiator (Part No.813157)

Radiator

from

$269.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

KAI – Radiator (Part No.RAD13157)

Radiator

from

$122.99
New Platinum Pro Radiator, For Models With 1 Inch Thick Core

Product Features:
  • For Models With 1 Inch Thick Core, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – OE Solutions Coolant Reservoir – Expansion Tank (Part No.G1030829422DOR)

OE Solutions Coolant Reservoir - Expansion Tank

from

$122.87
Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:
  • Comes with reservoir cap
  • Level sensor included (where applicable)
  • Direct replacement for a proper fit every time
  • Quality tested to ensure trouble-free installation and performance
See More

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-056)

Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

from

$76.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Dorman – OE Solutions Auxiliary Cooling Fan Assembly (Part No.G5000719911DOR)

OE Solutions Auxiliary Cooling Fan Assembly

from

$218.24
Save time, money and labor with Dorman’s Engine Cooling Fan Assembly. It comes ready to install with the motor, shroud, and blade. Plus, the high fiberglass content offers extra strength and rigidity while improving thermal stability.

Product Features:
  • Optimal air flow prevents vehicle from overheating
  • Plug and Play jumper harnesses included (where applicable)
  • Direct replacement for a proper fit every time
  • All motors are tested prior to final packaging of fan assembly
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1216)

Coolant Temperature Sensor

from

$34.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Engine Coolant Temperature Switch (Part No.WTA1137)

Engine Coolant Temperature Switch

from

$23.99
The engine coolant temperature sender, not to be confused with the engine coolant temperature sensor, is located anywhere within the engine cooling system, and contains a thermistor that changes in resistance value as the thermistors ambient temperature changes. The engine coolant temperature sender is fed 12 volts and is typically used in conjunction with a gauge in the instrument cluster to provide a visual representation of the engine coolant temperature condition.

Product Features:
  • Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
  • Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
  • Thermally conductive grease within the housing providing the most accurate temperature transfer from the engine to the thermistor.
  • Plated brass or aluminum housings to prevent housing corrosion, ensures effective heat distribution to thermal element, and ensure a secure and leak-free thread mount.
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
See More

KAI – Rad/Condenser Fan Assembly (Part No.CH3115132)

Rad/Condenser Fan Assembly

from

$158.99
New Platinum Pro Radiator And Condenser Fan Assembly, Standard Duty Cooling

Product Features:
  • Standard Duty Cooling
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Carquest Premium – Engine Coolant HD Thermostat: With Seal, 203 Degrees (Part No.48792)

Engine Coolant HD Thermostat: With Seal, 203 Degrees

from

$28.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Motorad UltraStats – Thermostat: With Seal, 192 Degrees (Part No.5449-190)

Thermostat: With Seal, 192 Degrees

from

$28.49
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.

Product Features:
  • Heavy gauge stainless steel components offer increased reliability and long-lasting durability
  • Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
  • Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
  • AccuSpring Design for stable temperature control and increased cabin comfort
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

Imperial – 16" Electric Fan (Part No.226216)

16" Electric Fan

from

$115.99
Electric fan with 16″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Thin-line electric fan
  • 16″ diameter
  • 1,400 CFM
  • Use as a pusher or puller fan
See More

MAHLE Original – Engine Coolant Thermostat Seal (Part No.C32590)

Engine Coolant Thermostat Seal

from

$2.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – THERMOSTAT GASKET (Part No.35974)

THERMOSTAT GASKET

from

$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.58-645)

Water Pump: New, Installation Gasket Included

from

$65.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:
  • 100% Factory tested for leakage and dimensional precision
  • Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
  • Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
  • Assembled with new, high-quality unitized shaft seals to prevent premature leakage
  • Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
See More

Carquest Premium – New Water Pump (Part No.T5106)

New Water Pump

from

$175.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
See More

Carquest Premium – Engine Coolant Water Outlet (Part No.85041)

Engine Coolant Water Outlet

from

$31.99
Coated with corrosion and rust inhibitor

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring  to ensure proper seal (where applicable
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Dorman – Coolant Air Bleeder and Housing (Part No.G2033413928DOR)

Coolant Air Bleeder and Housing

from

$59.06
Re-engineered to address common failure points in the original equipment, Dorman’s Coolant Air Bleeder has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. This is more than a replacement; it’s an upgrade. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:
  • Direct replacement for a proper fit every time
  • Hoses slide on for easy installation
  • High-quality plastic or metal construction
  • Includes all hardware necessary for a complete repair (where applicable)
See More

Felpro – Engine Water Pump Gasket (Part No.35783)

Engine Water Pump Gasket

from

$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – Engine Water Pump Gasket (Part No.36071)

Engine Water Pump Gasket

from

$5.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and Seal, 45 Degree Neck Angle (Part No.902-314)

Coolant Housing/Water Outlet: With Water Outlet and Seal, 45 Degree Neck Angle

from

$26.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 45 Degree Neck Angle (Part No.902-317)

Coolant Housing/Water Outlet: With Water Outlet and O-Ring, 45 Degree Neck Angle

from

$33.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Dorman – Coolant Thermostat Housing (Part No.G4010349246DOR)

Coolant Thermostat Housing

from

$38.46
Re-engineered to address common failure points in the original equipment, Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. This is more than a replacement; it’s an upgrade. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:
  • Direct replacement for a proper fit every time
  • Hoses slide on for easy installation
  • High-quality plastic or metal construction
  • Includes all hardware necessary for a complete repair (where applicable)
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Seal, 192 Degrees (Part No.4314KT)

Thermostat Kit: Includes Housing, Thermostat and Seal, 192 Degrees

from

$27.49
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Motorad – Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees (Part No.4830KT)

Thermostat Kit: Includes Housing, Thermostat and Gasket, 195 Degrees

from

$14.79
Kit includes thermostat, housing, and all necessary seals/gaskets to do the complete job. These individual parts are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat and housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Thermostat Housing Assembly With Thermostat (Part No.902-3035HP)

Thermostat Housing Assembly With Thermostat

from

$44.99
The original coolant thermostat housing assembly on certain Chrysler and Dodge vehicles is made from plastic that becomes brittle over time, eventually leading to cracks. In addition, overtightening the bleeder valve can cause fluid leaks that can damage the cooling system. This Dorman OE FIX thermostat housing assembly is manufactured from corrosion-resistant aluminum to provide increased coolant system protection, and features patent-pending design upgrades that optimize coolant flow and heat transfer..

Product Features:
  • Upgraded replacement – this coolant thermostat housing assembly is made of aluminum and is able to withstand underhood temperatures better than the original plastic assembly.
  • Increases reliability – corrosion-resistant aluminum design reduces future maintenance costs and provides increased cooling system protection
  • Patent-pending design – engineered to optimize coolant flow and heat transfer, tested and backed by a team of product experts in the United States and more than a century of automotive experience
  • Application specific – made to directly match the function and fit of the original engine coolant water outlet on specified Chrysler and Dodge vehicles
See More

2022 Chrysler 300 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2022 Chrysler 300. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 27 different Engine Cooling Parts in our inventory ranging from $5.49 to $343.92. That means you can find the exact parts or products you need to keep that 2022 Chrysler 300 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 2022 Chrysler 300. Carquest Premium, Motorad UltraStats, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2022 Chrysler 300, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 282 reviews in this category, some of the top rated parts include Radiator with 3.6 stars and Coolant Housing/Water Outlet with 5.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2022 Chrysler 300 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2022 Chrysler 300 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 Chrysler 300 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 300 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Felpro Engine Cooling Parts

We carry Felpro parts in our stock across Thermostat Seals categories, plus more. For a 2022 Chrysler 300, our most popular Felpro Engine Cooling Parts include:
THERMOSTAT GASKET
from $9.79
(2)
THERMOSTAT GASKET
Thermostat Seals

FAQs for 2022 Chrysler 300 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2022 Chrysler 300?

Out of 27 Engine Cooling Parts for the 2022 Chrysler 300, the most popular in our inventory are:
Integrated Housing Thermostat-203 Degrees w/ Seal
from $25.99
(12)
Integrated Housing Thermostat-203 Degrees w/ Seal
Thermostat and Water Outlet Assemblies
Thermostat: With Seal, 203 Degrees
from $31.99
This product is not rated
Thermostat: With Seal, 203 Degrees
Thermostats
Radiator
from $269.99
(1)
Radiator
Radiators

What are the top-rated 2022 Chrysler 300 Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2022 Chrysler 300 based on customer reviews/ratings are:
Radiator
from $268.99
(5)
Radiator
“No problems.”
Coolant Housing/Water Outlet
from $29.49
(4)
Coolant Housing/Water Outlet
“Worked fine.”
Radiator Fan Assembly: Single, Cost Effective And Reliable
from $204.99
(2)
Radiator Fan Assembly: Single, Cost Effective And Reliable
“Way better quality than other aftermarket fans”