2022 Chevrolet Trailblazer Engine Cooling Parts

Essential 2022 Chevrolet Trailblazer Engine Cooling Parts

Carquest Premium – Radiator Cap: 15 PSI (Part No.10248)

Radiator Cap: 15 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

ACDelco – GM Original Equipment Expansion Tank Cap (Part No.G1040465619ACD)

GM Original Equipment Expansion Tank Cap

from

$17.61
An ACDelco GM Original Equipment Expansion Tank Cap is a spring loaded cap that seals the radiator filler neck or surge tank, and is a GM-recommended replacement for your vehicle’s original component. It maintains pressure on the cooling system while the engine is operating, which raises the boiling point of the engine coolant. It also replenishes the system with coolant from the expansion tank (if equipped) when the engine cools off. This original equipment radiator cap has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. Get the GM quality you know and trust with ACDelco GM Original Equipment Thermostats and Caps. Stay with the brand of parts your General Motors vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Thermostats and Caps are engineered for virtually every model of GM car, light duty truck, and sport utility vehicle.

Product Features:
  • Seal and maintain pressure on the cooling system for vehicle safety
  • Raise the boiling point of the engine coolant to maintain efficiency
  • Fit most models of GM vehicles for expanded coverage
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.82594)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$11.29
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Radiator Cap: 20 PSI

from

$19.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Dorman Expansion Tank Cap (Part No.G1040206055DOR)

Dorman Expansion Tank Cap

from

$6.90
Dorman offers a variety of Engine Coolant Recovery Tank Caps for a range of applications. All Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They effectively protect the cooling system by providing a tight seal against the elements.

Product Features:
  • Save time, money and labor by replacing only the Cap – instead of the entire Engine Coolant Recovery Tank
  • Direct replacement for a proper fit every time
  • A necessary safety item – prevents coolant from splashing and/or leaking
  • Available in diverse styles, including screw-on and snap-on
See More

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020424897ACD)

GM Original Equipment Engine Coolant Temperature Sensor

from

$43.22
The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10076)

Engine Coolant Temperature Sensor

from

$50.99
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4514)

Engine Coolant Temperature Sensor

from

$34.99
ACDelco Professional Engine Coolant Temperature Sensor is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket sensor is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1413)

Coolant Temperature Sensor

from

$9.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1002)

Coolant Temperature Sensor

from

$20.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0174)

Engine Coolant Temperature Sensor

from

$39.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Delphi – Air Temperature Sensor (Part No.C6000175619DEL)

Air Temperature Sensor

from

$22.52
Delphi’s Air Temperature Sensors are continuous function devices that change resistance inversely to temperature. They measure engine intake air temperature in the manifold, intake air duct, and air cleaner. A signal is then sent to the powertrain control module.

Product Features:
  • High-temperature thermoplastic shell for durability
  • Patented, lightweight, and cost-effective pre-mold subassembly
  • Design flexibility to match calibration criteria, meet mounting and packaging requirements, and integrate with systems
  • Customized packaging of mounting features, sealing options, connection system, and resistance output
  • Crimpless conductive path to the negative temperature coefficient thermistor and calibration certification for enhanced reliability and accuracy; also eliminates an electrical interface
  • 100 percent resistance calibration verification helps ensure quality and reliability
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0075)

Engine Coolant Temperature Sensor

from

$38.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Coolant Temperature Sensor with Thread Sealant and Washer (Part No.WTC1047)

Coolant Temperature Sensor with Thread Sealant and Washer

from

$44.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Coolant Temperature Sensor with Harness (Part No.WTC1033)

Coolant Temperature Sensor with Harness

from

$37.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

2022 Chevrolet Trailblazer Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2022 Chevrolet Trailblazer. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 3 different Engine Cooling Parts in our inventory ranging from $9.99 to $19.79. That means you can find the exact parts or products you need to keep that 2022 Chevrolet Trailblazer running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2022 Chevrolet Trailblazer. Carquest Premium and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2022 Chevrolet Trailblazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2022 Chevrolet Trailblazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2022 Chevrolet Trailblazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 Chevrolet Trailblazer demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Trailblazer the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Carquest Premium Engine Cooling Parts

We carry Carquest Premium parts in our stock across Coolant Reservoir Caps categories, plus more. For a 2022 Chevrolet Trailblazer, our most popular Carquest Premium Engine Cooling Parts include:
Radiator Cap: 20 PSI
from $19.79
(6)
Radiator Cap: 20 PSI
Coolant Reservoir Caps

FAQs for 2022 Chevrolet Trailblazer Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2022 Chevrolet Trailblazer?

Out of 3 Engine Cooling Parts for the 2022 Chevrolet Trailblazer, the most popular in our inventory are:
GM Original Equipment Expansion Tank Cap
from $17.61
This product is not rated
GM Original Equipment Expansion Tank Cap
Coolant Reservoir Caps
Coolant Temperature Sensor
from $9.99
This product is not rated
Coolant Temperature Sensor
Coolant Temperature Sensors