2022 Chevrolet Colorado Engine Cold Air Intakes

The K&N 63-3095 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on select Chevy Silverado models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3095 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• 1-Piece Housing
• Hassle Free Installation
• Premium Hardware
• No Cutting or Drilling On OEM Parts For Faster Installation

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• 1-Piece Housing
• 5 Layer Performance Air Filter
• Premium Hardware
• CNC Machined Fittings

This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (6-3/4″ x 4-3/4″) oval flange and is 9″ tall with an inverted top. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.

Product Features:

• Outflows Factory Intake By Up To 29%
• Produces +9 HP / +7 ft./lbs. Torque Max Gains
• High Quality 1-Piece Sealed Housing w/Aux. Air Inlet
• CAD-Designed Roto-Molded Intake Tube

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

8″ Tall Air Filter: This intake system utilizes an oil free, 8″ tall inverted top conical 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum airflow and performance. Mandrel-Bent Tubing: Two Piece 3-1/2″ Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. One-Piece Heat Shield: Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. 3-Angle Adaptor: The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Product Features:

• Outflows Factory Intake By 17%
• Mandrel Bent Wrinkle Black Alum. Intake Tubing
• Utilities Stock Mounting Locations
• 3 Angle Filter Adapter Increases Air Velocity

8″ Tall Air Filter: This intake system utilizes an oil free, 8″ tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. One-Piece Heat Shield: Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. 3-Angle Adaptor: The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.

Product Features:

• Outflows Factory Intake By 31%
• CAD-Designed Roto-Molded Intake Tube
• Powder coat 1-Piece Heat Shield Utilizes Stock Mounting Loc.
• Washable And Reusable

8″ Tall Air Filter: This intake system utilizes a pre-oiled, 8″ tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Mandrel-Bent Tubing: wo Piece 3-1/2″ Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. One-Piece Heat Shield: Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. 3-Angle Adaptor: The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Product Features:

• Outflows Factory Intake By 17%
• Mandrel Bent Wrinkle Black Alum. Intake Tubing
• Utilizes Stock Mounting Locations
• 3 Angle Filter Adapter Increases Air Velocity

57-series OEM air box intake systems include a washable, reusable High-Flow Air Filter paired with a CAD-designed high airflow intake tube, and is designed to be a simple, cost-effective performance upgrade. The included oiled cotton filter is a direct replacement for your factory filter, drops easily into the factory air box, can go up to 50,000 miles between filter services under normal highway driving conditions, and offers K&N’s industry-leading engine protection. Each 57-series OEM air box intake system is designed for specific vehicle applications to ensure a precise fit, and can typically be installed in less than 90 minutes with only standard hand tools. Legal in all 50 States.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY