2022 Chevrolet Camaro Cooling and Climate Controls

Name: Temperature Sender With Gauge
Brand: Carquest Premium
SKU: WTC1017
Price: 27.99 USD

Below you will find various in-demand Chevrolet Cooling and Climate Controls, components and accessories for your 2022 Camaro. Advance Auto Parts has popular Camaro parts like Engine Cooling Parts, Blend Doors, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Camaro model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2023 and more. Select a category of 2022 Chevrolet Camaro Cooling and Climate Controls below and start saving instantly.

Popular 2022 Chevrolet Camaro Cooling and Climate Controls Categories

Humidity Sensors

Water Pump Housing Gaskets

AC Compressor Without Clutch

AC Air Inlet Door Actuators

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

Coolant Temperature Sensors

Coolant Reservoir Caps

AC Condensers

AC Caps and Valve Core Kits

AC Receiver Drier Desiccant Elements

Thermostat Seals

Accumulator and Receiver Driers

Thermostat and Water Outlet Gaskets

Expansion Valve and Orifice Tubes

AC Refrigerant Pressure Sensors

AC Service Valve Caps

Essential Cooling and Climate Controls for 2022 Chevrolet Camaros

from

$27.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$98.59

Dorman’s Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss.

Product Features:

Comes with reservoir cap
Level sensor included (where applicable)
Direct replacement for a proper fit every time
Quality tested to ensure trouble-free installation and performance

from

$16.29

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$315.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
Double lip shaft seal to reduce refrigerant leakage over time requiring less maintenance

from

$22.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Precision machined ports

from

$211.84

Air Flap Actuator

from

$114.99

GM Genuine Parts Multi Purpose Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems – aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$175.99

New Platinum Pro Radiator, 6.2 Liter V8 Engine, Without Supercharger

Product Features:

6.2 Liter V8 Engine, Without Supercharger, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$19.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$117.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$19.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environment
PermaDryPlus water outlet gaskets utilize rigid carrier construction and silicone sealing beads to ensure a long-lasting seal, including those with warped housing flanges
Validated for fit, form, and function
Quality that you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$51.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$23.13

An ACDelco Professional, premium aftermarket Standard Type Radiator Cap is the ideal high quality replacement for your GM vehicle. It seals and pressurizes your vehicle’s cooling system as the radiator transfers heat from the engine’s coolant to the outside air. This premium aftermarket replacement standard type radiator cap is manufactured to meet or exceed your expectations for fit, form, and function. ACDelco Professional, premium aftermarket Thermostats and Caps offer you an ideal replacement for your worn GM Original Equipment part. Engineered to work with your car, truck, or SUV, ACDelco has a thermostat or cap for virtually any GM vehicle on the road today. ACDelco Professional, premium aftermarket Thermostats and Caps give you our legendary quality at a competitive price.

Product Features:

Fit most models of GM vehicles on the road today for more coverage
Seal and pressurize your vehicle’s cooling system as the radiator transfers heat from the engine’s coolant to the outside air
Professional, premium aftermarket replacement radiator cap
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$38.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$269.07

The GMB Water Pump contains no remanufactured components and is designed to combat engine overheating associated with higher RPM, performance and high load applications. All GMB Water Pumps feature a precision ground, heavy duty steel bearing that`s completely sealed and lubricated for life. A specially modified, high performance impeller eliminates cavitation at high RPM`s, maintaining maximum volumetric flow of coolant, thus reducing engine temperature and increasing horsepower.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High flow design
Factory lubricated bearing assembly
Precision ground shaft and hub
OE quality forged housing for maximum coolant flow
Precision built and balanced
Pressed on impeller for increased water flow
Unique no sealed required gasket
Unitized seal protects bearings and provides long life leak free performance.
Factory sealed precision ground one piece bearing assembly

from

$9.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$29.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$36.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$55.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$61.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$4.09

The Mahle Engine Coolant Thermostat O-Ring is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$8.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$8.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$13.99

New Standard Replacement A/C System Valve Core And Cap Kit

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$14.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
SUV and rear air applications
Application specific

from

$107.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$72.99

GM Genuine Parts Engine Coolant Thermostat / Water Inlet Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These engine coolant thermostat / water inlet assemblies contain the engine thermostat and water inlet housing. The engine coolant thermostat controls the flow of coolant through the radiator; enabling the engine to reach and maintain its normal operating temperature. The water inlet housing connects the radiator hoses to the thermostat. For certain applications, the water inlet contains threaded holes or ports for sensors and switches. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Provides a durable leak-resistant seal
Repairs leaking thermostat housings
Corrects engine overheating caused by failed thermostat
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

Upgrade your 2022 Chevrolet Camaro with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2022 Chevrolet Camaro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Camaro functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Cooling and Climate Controls for the 2022 Chevrolet Camaro, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Blend Doors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2022 Chevrolet Camaro at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $3.84 to $499.99, with an average price of $63.34. Our 41 Cooling and Climate Controls in stock come from 12 trusted brands, so you’re sure to find the right part for your 2022 Chevrolet Camaro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2022 Chevrolet Camaro, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Carquest Premium GM Genuine, and more. Carquest Premium Cooling and Climate Controls start at just $8.99 and boast an impressive 4 stars average rating from customers. With 102 customer reviews and counting, our 2022 Chevrolet Camaro Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2022 Chevrolet Camaro is always ready to roll. We’re committed to providing you with everything you need to keep your Camaro in top shape, all in one place. Start shopping confidently below for your 2022 Chevrolet Camaro!

Best-Selling Engine Cooling Parts for 2022 Chevrolet Camaros

Enhance the driving experience in your Chevrolet with 23 quality Engine Cooling Part components, starting at $3.84.

show more show less

from

$119.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$20.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$29.99

ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps keep engine running at proper temperature
Alerts vehicle operator of high engine temperature conditions
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

Helps keep engine running at proper temperature
Alerts vehicle operator of high engine temperature conditions
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$5.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form, and function
Validated for fit, form, and function

from

$104.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$43.47

The ACDelco Professional Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$8.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$19.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$189.99

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$45.59

Expansion Tank

from

$209.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$145.99

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$141.99

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$25.17

The ACDelco GM Original Equipment Engine Coolant Temperature Sensor monitors the engine temperature, and is a GM-recommended replacement for your vehicle’s original component. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. This original equipment engine coolant temperature sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Undergo the same stringent testing process as the original part
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$20.41

Expansion Tank Cap

from

$14.10

An ACDelco GM Original Equipment Engine Coolant Thermostat Housing Gasket is a GM-recommended replacement for your vehicle’s original component. It seals the gap between the exterior of the thermostat housing and the exterior of the engine. This original equipment engine coolant thermostat housing gasket has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$12.81

Expansion Tank Cap

from

$10.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$9.51

Thermostat Housing G

from

$9.44

Water Pipe Gasket

from

$7.61

Thermostat Housing G

from

$3.84

THERMOSTAT HOUSING G

Top Picks for 2022 Chevrolet Camaro Air Conditioning Parts

Upgrade Chevrolet Camaros with top-quality Air Conditioning Parts parts, including 14 OEM and aftermarket selections for your 2022 model.

show more show less

from

$6.99

GM Genuine Parts A/C Service Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These spring-loaded valves allow service access to the A/C system. The service valves allow the service technician to evacuate and recharge the refrigerant in the A/C system. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repairs leaking A/C system
Restores A/C function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$10.99

GM Genuine Parts A/C System Valve Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C system valve cores are components of the A/C service valve through which your vehicle’s refrigerant can be accessed and serviced. The valve core is a spring-loaded poppet valve that is opened when the service technician connects the A/C service machine hose couplers. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repair leaking A/C system, restore A/C function
Helps restore A/C Function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$38.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$55.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$20.54

Drier Desiccant Elem

from

$499.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Each unit is charged with ICE32 lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car

from

$314.65

A/C CONDENSER

from

$117.13

A/C Expansion Valve

from

$102.97

A/C Pressure Switch

from

$43.99

GM Genuine Parts A/C Service Valve Fittings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$40.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$19.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$15.99

GM Genuine Parts Rubber-Bonded Sealing Washers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$4.34

A/C Service Valve Fi

In-Demand Blower Motor and Related Products for 2022 Chevrolet Camaros

Select from 1 premium Blower Motor and Related Products parts for your 2022 Chevrolet Camaro.

show more show less

from

$185.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Functionally Equivalent to OE Design
Each unit is 100% tested for functional performance and operational noise
Hermetically Sealed & Thermally Protected Electronics

Most Sold 2022 Chevrolet Camaro HVAC Electrical Parts

Explore our best-selling Chevrolet parts for the 2022 Camaro among 1 OEM and aftermarket options starting from $114.99.

show more show less

from

$114.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems – aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

Top-Rated Cooling and Climate Controls Brands For Your 2022 Chevrolet Camaro

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2022 Chevrolet Camaros. Below you’ll find some of our best rated Cooling and Climate Controls from Carquest Premium and GM Genuine, and more. Cooling and Climate Controls from these brands that fit a 2022 Camaro start at just $6.99 and are rated as high as 4 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2022 Chevrolet Camaro Cooling and Climate Controls

When it comes to maintaining or upgrading your 2022 Chevrolet Camaro, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Cooling and Climate Controls, specifically designed for the 2022 Chevrolet Camaro. With over 11 Carquest Premium brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.99, with an average price of just $110.26. Plus, with over 8 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$55.99

This product is not rated

AC Pressure Sensor

“”

from
$8.99

This product is not rated

Coolant Temperature Sensor

“”

from
$20.99

This product is not rated

Coolant Temperature Sensor

“”

Popular GM Genuine 2022 Chevrolet Camaro Cooling and Climate Controls

GM Genuine auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2022 Chevrolet Camaro owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2022 Camaro, Advance Auto Parts carries a full inventory of 5 GM Genuine Cooling and Climate Controls. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these GM Genuine Cooling and Climate Controls range from $6.99 to $114.99, plus, with more than 13 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$15.99

This product is not rated

Air Conditioning Line O-Ring

“”

from
$114.99

This product is not rated

Multi-Purpose Air Sensor

“”

from
$43.99

This product is not rated

Air Conditioning Service Valve

“”

FAQs for 2022 Chevrolet Camaro Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2022 Chevrolet Camaros?

Out of 41 Cooling and Climate Controls that fit 2022 Chevrolet Camaros, the following parts are the top sellers:

Coolant Temperature Sensor (12422847) – $20.99
Multi-Purpose Air Sensor (11930956) – $114.99
A/C Desiccant Bag Kit (15890540) – $38.99

What’s the price range for 2022 Chevrolet Camaro Cooling and Climate Controls?

Cooling and Climate Control prices for the 2022 Chevrolet Camaro start at $3.84 and go up to $499.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2022 Chevrolet Camaro?

The average price for Cooling and Climate Controls for the 2022 Chevrolet Camaro is $63.34. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Chevrolet Camaro model years?

Yes, we currently carry Cooling and Climate Controls for 50 model years of Chevrolet Camaros between 1967 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2022 Chevrolet Camaro?

The cheapest 2022 Chevrolet Camaro Cooling and Climate Controls we carry in stock are:

THERMOSTAT HOUSING G (50148908) – $3.84
A/C Service Valve Fi (11939590) – $4.34
Thermostat Gasket (12005650) – $5.79
Air Conditioning Service Valve (18053248) – $6.99
Thermostat Housing G (12146907) – $7.61

What are the top-rated Cooling and Climate Controls that fit the 2022 Chevrolet Camaro?

Out of 102 reviews by customers, our 2022 Chevrolet Camaro Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2022 Chevrolet Camaro and their top-rated products:

Engine Cooling Parts
- Engine Water Pump: New, Gasket/Seals Included (12002251) – $119.99

What types of Cooling and Climate Controls do you sell for my 2022 Chevrolet Camaro?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2022 Chevrolet Camaro:

Can I get help with 2022 Chevrolet Camaro Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Cooling and Climate Controls and more.

What is your return policy for Chevrolet Camaro Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Chevrolet Camaro Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2022 Chevrolet Camaro Cooling and Climate Controls

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1017)

Dorman – Coolant Reservoir – Expansion Tank (Part No.G1030308591DOR)

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54215)

Carquest Premium – New Compressor with Clutch, GM R4 Heavy (Part No.T58228)

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38622)

ACDelco – Air Flap Actuator (Part No.R2046603059ACD)

GM Genuine Parts – Multi-Purpose Air Sensor (Part No.23262343)

KAI – Radiator (Part No.RAD13345)

Felpro – Engine Water Pump Gasket (Part No.36109)

Carquest Premium – A/C Condenser (Part No.2097)

Felpro – WATER OUTLET GASKET (Part No.35562 T)

Carquest Premium – Blower Motor: With Wheel (Part No.35339)

ACDelco – Professional Radiator Caps (Part No.G1010203283ACD)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

GMB – GMB Water Pump (Part No.G3000322470GMB)

Carquest Premium – A/C Accumulator Tube (Part No.T34206)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-315)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-152)

Carquest Premium – AC Pressure Sensor (Part No.ABA1005)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1526)

Felpro – Engine Coolant Thermostat Housing Seal (Part No.35720)

Mahle – Engine Coolant Thermostat O-Ring (Part No.G4030204690MAH)

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Dorman – A/C Service Valve Cap (Part No.902-025)

KAI – Valve Core/Cap Kit (Part No.FTT010103)

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Dorman – Thermostat Assembly: Includes Housing, Thermostat, and O-Ring, 180 Degrees (Part No.902-2700)

GM Genuine Parts – Engine Coolant Thermostat Water Inlet Assembly (Part No.15-10412)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2395)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1002)

ACDelco – Engine Coolant Temperature Sensor (Part No.213-4232)

ACDelco – Engine Coolant Temperature Sensor (Part No.12656444)

Felpro – Thermostat Gasket (Part No.36106)

Motorad – Integrated Thermostat Housing: With Seal, 194 Degrees (Part No.815-194)

ACDelco – Professional Engine Coolant Temperature Sensor (Part No.C6020575693ACD)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1286)

Felpro – Engine Water Pump Gasket (Part No.36109)

Dorman – Thermostat Assembly: Includes Gasket, Thermostat, and Housing, 194 Degrees (Part No.902-2114)

Original Equipment – Expansion Tank (Part No.G1030443836OEA)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813589)

Dorman – Thermostat Assembly: Includes Gasket, Thermostat, and Housing, 182 Degrees (Part No.902-2089)

Dorman – Thermostat Assembly: Includes Housing, Bolts, and Gasket, 212 Degrees (Part No.902-2121)

ACDelco – GM Original Equipment Engine Coolant Temperature Sensor (Part No.C6020581130ACD)

ACDelco – Expansion Tank Cap (Part No.G1040429938ACD)

ACDelco – 12630780 GM Original Equipment Engine Coolant Thermostat Housing Gasket (Part No.G4031551208ACD)

Autopart International Inc – Expansion Tank Cap (Part No.G10402009531API)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1276)

ACDelco – Thermostat Housing G (Part No.G4020584443ACD)

ACDelco – Water Pipe Gasket (Part No.G2048556954ACD)

Mahle – Thermostat Housing G (Part No.G4020584443MAH)

Kibi Gaskets – THERMOSTAT HOUSING G (Part No.G40201226720KIB)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-152)

Santech – A/C Servo (Part No.R20402094842SII)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-5438)

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

Carquest Premium – AC Pressure Sensor (Part No.ABA1005)

Santech – Drier Desiccant Elem (Part No.R10432105970SII)

Carquest Premium – New Compressor with Clutch, Nippondenso 6SAS14C (Part No.T68321)

Worldpac – A/C CONDENSER (Part No.R10303587850KCS)

ACDelco – A/C Expansion Valve (Part No.R1045513279ACD)

ACDelco – A/C Pressure Switch (Part No.R1054847144ACD)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-51312)

Carquest Premium – A/C Block Expansion Valve (Part No.T39500)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83233)

GM Genuine Parts – Air Conditioning Line O-Ring (Part No.13579649)

Santech – A/C Service Valve Fi (Part No.R11491515863SII)

Carquest Premium – Blower Motor: With Wheel (Part No.76502)

GM Genuine Parts – Multi-Purpose Air Sensor (Part No.23262343)