2022 Audi S5 Engine Cooling Parts

Essential 2022 Audi S5 Engine Cooling Parts

Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)

Oil Drain Plug Gaske

from

$0.62
Oil Drain Plug Gaske

NTK – Engine Coolant Temperature Sensor (Part No.EF0153)

Engine Coolant Temperature Sensor

from

$29.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)

Coolant Temperature Sensor

from

$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest – Engine Coolant Temperature Sensor (Part No.WT7257)

Engine Coolant Temperature Sensor

from

$20.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • In manufacturing, we custom form the wax pellets for different temperature range specifications. All units are calibrated & tested to confirm switch actuation at their specified temperature
  • The switch is designed using a formed bimetallic contact arm. The bimetal contact movement is achieved using the different expansion rates of two metals fused together. This is a creep action device, provides precise performance
  • In production, all thermal switches are factory-calibrated to make electrical contact at the specified lower-temperature set point
  • Robust design and high grade materials meet the stringent demands of today’s service professional
See More

Elth – Water Temp. Sensor (Part No.C6020239910ELT)

Water Temp. Sensor

from

$22.14
Water Temp. Sensor

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)

Coolant Temperature Sensor with O-Ring

from

$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)

Engine Coolant Temperature Sensor

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Pierburg – Auxiliary Water Pump (Part No.G3050551811APG)

Auxiliary Water Pump

from

$154.43
Auxiliary Water Pump

Pierburg – Pierburg Auxiliary Water Pump (Part No.G3050551666APG)

Pierburg Auxiliary Water Pump

from

$572.98
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Pierburg – Auxiliary Water Pump (Part No.G3050551801APG)

Auxiliary Water Pump

from

$163.28
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Carquest Premium – New Auxiliary Water Pump (Part No.T1375)

New Auxiliary Water Pump

from

$433.99
This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:
  • Electric water pump
  • Specialized for vehicles using supplemented cooling for the engine or components
  • Plastic housing
  • All components necessary for installation are supplied with pump
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

2022 Audi S5 Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2022 Audi S5. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 4 different Engine Cooling Parts in our inventory ranging from $0.62 to $163.28. That means you can find the exact parts or products you need to keep that 2022 Audi S5 running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2022 Audi S5. Pierburg, Carquest Premium, and Meistersatz are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2022 Audi S5, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2022 Audi S5 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2022 Audi S5 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2022 Audi S5 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your S5 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

FAQs for 2022 Audi S5 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2022 Audi S5?

Out of 4 Engine Cooling Parts for the 2022 Audi S5, the most popular in our inventory are:
Auxiliary Water Pump
from $163.28
This product is not rated
Auxiliary Water Pump
Engine Auxiliary Water Pumps
Oil Drain Plug Gaske
from $0.62
This product is not rated
Oil Drain Plug Gaske
Engine Coolant Temperature Sensor O-Rings
Coolant Temperature Sensor with O-Ring
from $50.99
This product is not rated
Coolant Temperature Sensor with O-Ring
Coolant Temperature Sensors