2021 Nissan Altima Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 2021 Nissan Altimas

Delphi – Ignition Coil (Part No.F30001230078DEL)

Ignition Coil

from

$54.12
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:
  • Improved dwell accuracy decreases module and coil temperatures for greater reliability
  • Noise abatement material between laminations reduces audible coil noise
  • Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
  • Lower primary inductance provides high-speed performance
  • Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
  • Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
  • Direct connection to spark plugs (via small boot) eliminates spark plug wires
  • Composite iron coils provide programmable energy
  • Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
  • Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
  • Radio frequency interference (RFI) suppressor optional
See More

Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005539044HIT)

Direct Ignition Coil - (Coil on Plug)

from

$101.49
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Enhances durability and increases energy transfer
  • Reduces misfires, rough timing and intermittent starting
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005292600HIT)

Direct Ignition Coil - (Coil on Plug)

from

$88.57
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Enhances durability and increases energy transfer
  • Reduces misfires, rough timing and intermittent starting
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Hitachi – Ignition Coil Actual OE Part – New (Part No.IGC0006)

Ignition Coil Actual OE Part - New

from

$117.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

Hitachi – Ignition Coil Actual OE Part New (Part No.IGC0099)

Ignition Coil Actual OE Part New

from

$71.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49024)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$99.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1537)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$62.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26A1013)

Ignition Coil: Meets OE Specifications, 1 Count

from

$76.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1019)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$75.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

NGK – Laser Iridium Spark Plug (Part No.F1000130951NGK)

Laser Iridium Spark Plug

from

$22.51
NGK’s Laser Iridium Spark Plugs Provide Superior Ignitability and Long Service Life. Fine Wire Iridium Tipped Center Electrode and Fine Wire Platinum Tipped Ground Electrode Ensures Slow Wear Rate Providing Stable Idle, Superior Anti Fouling, Improved Fuel Efficiency and Lower Emissions.

Product Features:
  • Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
  • Corrugated Ribs Prevent Flashover
  • Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
  • Copper Core Aids in Heat Removal
  • Triple Seals Prevent Leakage
See More

NGK – OE Series Laser Iridium High Ignitability Spark Plug: DFE Tip Design, DILKAR7B11 (Part No.1406)

OE Series Laser Iridium High Ignitability Spark Plug: DFE Tip Design, DILKAR7B11

from

$26.99
NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Laser Iridium High Ignitability spark plugs feature raised platinum pad or platinum fine wire tip on the ground electrode for even wear in distributorless ignition systems and improved spark performance.

Product Features:
  • ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: DFE tip and iridium alloy center electrode produce the most advanced OE spark plug technology
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • DFE DESIGN: Double fine electrode (platinum pin) provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE DFE iridium alloy plugs
  • Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance and reliability.
  • Enhanced Spark Performance: Features a raised platinum pad or platinum fine wire tip on the ground electrode for even wear and improved spark performance in distributorless ignition systems.
  • Tested to High Standards: Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and durability.
See More

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5683)

Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition

from

$9.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
  • Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
  • Engineered in the USA: Designed with over 100 years of Autolite engineering experience for superior quality and performance.
  • Proven Track Record: Part of a legacy with over 11 billion spark plugs sold, ensuring trusted performance and reliability.
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip, PFR5G-11 (Part No.2647)

OE Series Laser Platinum Spark Plug: Fine Wire Tip, PFR5G-11

from

$14.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applica

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
See More

NGK – Laser Platinum Spark Plug (Part No.F1000105358NGK)

Laser Platinum Spark Plug

from

$18.65
NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.

Product Features:
  • Laser welded Platinum center electrode tip
  • Platinum disc welded to backside of ground electrode provides long life
  • Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
  • Faster starts and quicker acceleration
  • Better fuel economy and lower emissions
  • Best Platinum spark plug available
  • Original Equipment Manufacturer approved design
See More

NGK – G-Power Spark Plug: Single Platinum Tip Design, LFR5AGP (Part No.5018)

G-Power Spark Plug: Single Platinum Tip Design, LFR5AGP

from

$11.49
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
  • Enhanced Durability: The platinum tip design ensures increased durability, making these spark plugs a reliable choice for long-term use.
  • Gasket Seat Type: Equipped with a gasket seat type, ensuring a secure and proper fit in the engine for optimal performance.
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.3924)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, LKAR6AHX (Part No.97292)

Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, LKAR6AHX

from

$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE t

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
See More

NGK – G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP (Part No.7090)

G-Power Spark Plug: Single Platinum Tip Design, BKR5EGP

from

$6.29
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1035)

Ignition Knock (Detonation) Sensor

from

$129.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1051)

Ignition Knock (Detonation) Sensor

from

$317.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Delphi – Knock Sensor (Part No.AS10128)

Knock Sensor

from

$173.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Delphi – Knock Sensor (Part No.AS10271)

Knock Sensor

from

$99.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-J50012)

Genuine OE Ignition Knock (Detonation) Sensor

from

$113.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.

Product Features:
  • Genuine OE Part
  • Highly accurate engine vibration detection
  • Excellent material quality
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3756)

Ignition Knock (Detonation) Sensor

from

$116.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Hitachi – Hitachi Knock Sensor (Part No.F602058285HIT)

Hitachi Knock Sensor

from

$142.32
The Hitachi OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Hitachi – Knock Sensor – New Actual OE Part (Part No.KNS0001)

Knock Sensor - New Actual OE Part

from

$78.99
Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters. Hitachi sensor line supports accurate measurement for reliable engine performance.

Product Features:
  • Hitachi is a Tier 1 OE supplier for knock sensors
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Accurate and reliable measurements
  • Provides accurate measurement; reliable engine performance.
See More

FAE – FAE Knock Sensor (Part No.F6020426190FAE)

FAE Knock Sensor

from

$104.14
The FAE OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3929)

Ignition Knock (Detonation) Sensor

from

$112.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 2021 Nissan Altima with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2021 Nissan Altima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Altima functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Ignition and Tune-Up Products for the 2021 Nissan Altima, designed to meet your needs without breaking the bank. From Ignition Sensor replacements to Spark Plugs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2021 Nissan Altima at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $10.99 to $317.99, with an average price of $106.54. Our 5 Ignition and Tune-Up Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 2021 Nissan Altima without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2021 Nissan Altima is always ready to roll. We’re committed to providing you with everything you need to keep your Altima in top shape, all in one place. Start shopping confidently below for your 2021 Nissan Altima!

Best-Selling Ignition Sensors for 2021 Nissan Altimas

Enhance the driving experience in your Nissan with 1 quality Ignition Sensor components, starting at $317.99.

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1051)

Ignition Knock (Detonation) Sensor

from

$317.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Most Popular 2021 Nissan Altima Spark Plugs

Customize your Nissan with 1 Spark Plugs products like Spark Plugs, all priced under $10.99.

Autolite Iridium – Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability (Part No.AI5684)

Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability

from

$10.99
Autolite Iridium Ultra Laser Finewire Spark Plugs are one of our brand’s most technologically advanced products. These spark plugs provide superior durability, more focused ignition with better overall ignitability for optimum performance. Autolite Spark Plugs are the best alternative to OE spark plugs, offering OE fit form and function supporting all foreign and domestic makes and models at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs in the world.

Product Features:
  • Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
  • A laser-welded 0.5mm pure iridium finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
  • Nickel-plated shell to resist corrosion.
  • High-alumina ceramic insulator for increased strength.
  • Laser welded 0.5mm Iridium finewire center electrode.
  • Proprietary platinum sidewire technology.
See More

Top Picks for 2021 Nissan Altima Ignition Coils and Boots

Upgrade Nissan Altimas with top-quality Ignition Coils and Boots parts, including 3 OEM and aftermarket selections for your 2021 model.

Worldpac – IGNITION COIL (Part No.F30003547168DEL)

IGNITION COIL

from

$174.42
IGNITION COIL

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1930)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$89.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Hitachi – Ignition Coil Actual OE Part New (Part No.IGC0099)

Ignition Coil Actual OE Part New

from

$71.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

FAQs for 2021 Nissan Altima Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2021 Nissan Altimas?

Out of 5 Ignition and Tune-Up Products that fit 2021 Nissan Altimas, the following parts are the top sellers:

What’s the price range for 2021 Nissan Altima Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2021 Nissan Altima start at $10.99 and go up to $317.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2021 Nissan Altima?

The average price for Ignition and Tune-Up Products for the 2021 Nissan Altima is $106.54. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Nissan Altima model years?

Yes, we currently carry Ignition and Tune-Up Products for 32 model years of Nissan Altimas between 1993 and 2025. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 2021 Nissan Altima?

The cheapest 2021 Nissan Altima Ignition and Tune-Up Products we carry in stock are:

What types of Ignition and Tune-Up Products do you sell for my 2021 Nissan Altima?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2021 Nissan Altima:

Can I get help with 2021 Nissan Altima Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Ignition and Tune-Up Products and more.

What is your return policy for Nissan Altima Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Nissan Altima Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.