2021 Kia Forte Engine Cooling Parts

Essential 2021 Kia Forte Engine Cooling Parts

Felpro – Engine Coolant Outlet Gasket (Part No.36016)

Engine Coolant Outlet Gasket

from

$8.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Vemo – Engine Coolant Temperature Sensor (Part No.C6020109494VMO)

Engine Coolant Temperature Sensor

from

$20.42
The Vemo Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0112)

Engine Coolant Temperature Sensor

from

$42.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Delphi – Engine Coolant Temperature Sensor (Part No.TS10326)

Engine Coolant Temperature Sensor

from

$27.49
Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:
  • Delphi temperature sensors deliver accurate readings and optimal performance
  • Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
  • Each sensor is electrically insulated to eliminate interference from other components in the vehicle
  • Delphi temperature sensors are impervious to electrical noise and interference
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 212 Degrees (Part No.1014-212)

Integrated Thermostat Housing: With Sensor, With Seal, 212 Degrees

from

$239.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Thermostat Assembly: Includes Housing and Heating Element, 212 Degrees (Part No.902-5210)

Thermostat Assembly: Includes Housing and Heating Element, 212 Degrees

from

$243.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Motorad – Standard Thermostat: With Seal, 180 Degrees (Part No.726-180)

Standard Thermostat: With Seal, 180 Degrees

from

$28.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14818)

Standard Thermostat: 180 Degrees

from

$19.79
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Motorad – Standard Thermostat: With Seal, 192 Degrees (Part No.727-192)

Standard Thermostat: With Seal, 192 Degrees

from

$28.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Original Equipment – Thermostat Housing Cover (Part No.G4011415108OEA)

Thermostat Housing Cover

from

$23.22
The Original Equipment Thermostat Housing Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Radiator Cap: 16 PSI

from

$13.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack (Part No.54018)

Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack

from

$6.29
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Radiator Cap: 16 PSI

from

$21.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Safety lever to vent coolant pressure before removal
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Radiator Cap (Part No.54237)

Radiator Cap

from

$22.99
This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles
  • Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Water Pump Gasket (Part No.36003)

Engine Water Pump Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – Engine Water Pump Gasket (Part No.36015)

Engine Water Pump Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Felpro – Engine Water Pump Gasket (Part No.35813)

Engine Water Pump Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

MAHLE Original – WATER PUMP GASKET (Part No.K32135)

WATER PUMP GASKET

from

$5.79
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

AISIN – OE Replacement Water Pump (Part No.G3000181173ASC)

OE Replacement Water Pump

from

$87.01
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2390)

Engine Water Pump: New, Gasket/Seals Included

from

$114.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Water Pump: New, Installation Gasket Included (Part No.T1222)

Water Pump: New, Installation Gasket Included

from

$98.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
See More

AISIN – OE Replacement Water Pump (Part No.G3000573426ASC)

OE Replacement Water Pump

from

$81.43
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

AISIN – OE Replacement Water Pump (Part No.G3000409867ASC)

OE Replacement Water Pump

from

$91.98
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1197)

Engine Water Pump: New, Gasket/Seals Included

from

$119.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

2021 Kia Forte Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2021 Kia Forte. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 13 different Engine Cooling Parts in our inventory ranging from $7.99 to $243.99. That means you can find the exact parts or products you need to keep that 2021 Kia Forte running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2021 Kia Forte. Carquest Premium, Motorad, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2021 Kia Forte, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 236 reviews in this category, some of the top rated parts include Engine Coolant Temperature Sensor with 1.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2021 Kia Forte rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2021 Kia Forte Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2021 Kia Forte demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Forte the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Carquest Premium Engine Cooling Parts

We carry Carquest Premium parts in our stock across Engine Coolant Thermostat Housing Caps and Coolant Reservoir Caps categories, plus more. For a 2021 Kia Forte, our most popular Carquest Premium Engine Cooling Parts include:
Radiator Cap: 16 PSI
from $13.99
(193)
Radiator Cap: 16 PSI
Engine Coolant Thermostat Housing Caps
Radiator Cap: 16 PSI
from $21.99
(41)
Radiator Cap: 16 PSI
Coolant Reservoir Caps

FAQs for 2021 Kia Forte Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2021 Kia Forte?

Out of 13 Engine Cooling Parts for the 2021 Kia Forte, the most popular in our inventory are:
Coolant Temperature Sensor with Thread Sealant
from $38.99
This product is not rated
Coolant Temperature Sensor with Thread Sealant
Coolant Temperature Sensors
Standard Thermostat: With Seal, 192 Degrees
from $28.49
(1)
Standard Thermostat: With Seal, 192 Degrees
Thermostats
Engine Coolant Temperature Sensor
from $42.99
This product is not rated
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

What are the top-rated 2021 Kia Forte Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2021 Kia Forte based on customer reviews/ratings are:
Engine Coolant Temperature Sensor
from $20.42
(1)
Engine Coolant Temperature Sensor
“Price was good so I ordered and did replace this ect sensor. Your fan never run with this part. I have to buy another good one and right away fan ru”