2021 Honda Ridgeline Engine Cooling Parts
More 2021 Honda Ridgeline Engine Cooling Parts
Find your specific 2021 Honda Ridgeline original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2021 Honda Ridgeline Engine Cooling Parts
Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1203)
from
$38.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Engine Coolant Temperature Sensor (Part No.EF0110)
from
$49.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.
Product Features:
See More
Product Features:
- OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
- FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
- THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-360)
from
$117.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.
Product Features:
See More
Product Features:
- Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
- Complete package – assembly is designed with the same materials and components as the original part
- Quality assured – motors are tested in laboratory settings to ensure performance
- Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
Felpro – O-RING (Part No.35162)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Felpro – Engine Water Pump Gasket (Part No.35677)
from
$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
NOK – Water Pipe O-Ring (Part No.G202665192NOK)
from
$2.74
Water Pipe O-Ring
Felpro – WATER CROSS OVER MOUNT GASKET SET (Part No.ES 72774)
from
$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design for Unsurpassed quality you can trust
- Validated for fit, form, and function
- Quality that you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
OPT – Engine Coolant Thermostat Gasket (Part No.G403158060OPT)
from
$3.77
The OPT Engine Coolant Thermostat Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Ishino – Stone Engine Coolant Thermostat Housing Gasket (Part No.G4020184565ISH)
from
$1.70
The Ishino Stone Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Felpro – Engine Coolant Temperature Sensor O-Ring (Part No.72926)
from
$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Dorman – Thermostat Assembly: Includes Housing, Thermostat, and Gasket, 180 Degrees (Part No.902-5835)
from
$29.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Motorad – Integrated Thermostat Housing: With Seal, 180 Degrees (Part No.951-180)
from
$35.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Thermostat Assembly: Includes Gasket, Housing, and Thermostat, 180 Degrees (Part No.902-5836)
from
$49.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)
from
$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1611)
from
$56.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.
Product Features:
See More
Product Features:
- 100% Factory tested for leakage and dimensional precision
- Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
- Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
- Assembled with new, high-quality unitized shaft seals to prevent premature leakage
- Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2304)
from
$79.99
Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- Built to meet or exceed OE fit, form and function
- All components necessary for installation are supplied with pump
- 100% tested for reliable performance
- Follow all enclosed instructions to maximize pump life and validate warranty
NPW – Water Pump (Part No.G3000167512NPW)
from
$74.78
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced impeller design.
- Quality cast housing.
- Precision bearings.
- Resistant to corrosion.
- Unitized bearing assembly.
AISIN – OE Replacement Water Pump (Part No.G3000167512ASC)
from
$142.67
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced technological design.
- Carbon ceramic sealing.
- Resistant to corrosion.
- Optimum cooling performance and longevity.
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813065)
from
$236.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
KAI – Radiator (Part No.RAD13402)
from
$222.99
New Platinum Pro Radiator
Product Features:
See More
Product Features:
- Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.434032)
from
$246.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
- Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
- OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
Autopart International Inc – Radiator (Part No.G10001911036API)
from
$198.21
Radiator
Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)
from
$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)
from
$10.06
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Popular 2021 Honda Ridgeline Engine Cooling Parts Categories
2021 Honda Ridgeline Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 2021 Honda Ridgeline. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 23 different Engine Cooling Parts in our inventory ranging from $2.74 to $222.99. That means you can find the exact parts or products you need to keep that 2021 Honda Ridgeline running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2021 Honda Ridgeline. Carquest Premium, Felpro, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 2021 Honda Ridgeline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 620 reviews in this category, some of the top rated parts include THERMOSTAT GASKET with 5.0 stars.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2021 Honda Ridgeline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 2021 Honda Ridgeline Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2021 Honda Ridgeline demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Ridgeline the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular Sankei Switches Engine Cooling Parts
We carry Sankei Switches parts in our stock across Radiator Caps categories, plus more. For a 2021 Honda Ridgeline, our most popular Sankei Switches Engine Cooling Parts include:
Top 2021 Honda Ridgeline Engine Cooling Parts from Carquest Premium
Carquest Premium products are another trusted brand when it comes to Engine Cooling Parts for your 2021 Honda Ridgeline. Popular Carquest Premium parts include:
FAQs for 2021 Honda Ridgeline Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 2021 Honda Ridgeline?
Out of 23 Engine Cooling Parts for the 2021 Honda Ridgeline, the most popular in our inventory are:
from
$38.99
This product is not rated
Coolant Temperature Sensor with O-Ring
Coolant Temperature Sensors
What are the top-rated 2021 Honda Ridgeline Engine Cooling Parts?
Top-rated Engine Cooling Parts for your 2021 Honda Ridgeline based on customer reviews/ratings are:
