2021 Honda Pilot Engine Cooling Parts

Essential 2021 Honda Pilot Engine Cooling Parts

Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)

Sankei Switches Radiator Cap

from

$9.57
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
See More

Ishino – Water Pipe O-Ring (Part No.G202665192ISH)

Water Pipe O-Ring

from

$2.05
Water Pipe O-Ring

Driveworks Water Pumps – Water Pump: New, Installation Gasket Included (Part No.57-1528)

Water Pump: New, Installation Gasket Included

from

$36.99
Driveworks Water Pumps offer a complete replacement part solution, with application coverage that spans from antique to present-day vehicles. All units are 100% tested and engineered to meet or exceed OEM performance, providing you a quality product you and your vehicle can rely on. All units are manufacturered with brand new components and are packaged with all gaskets required for replacement.

Product Features:
  • 100% Factory tested for leakage and dimensional precision
  • Manufactured to original casting specifications to ensure a proper fit and proper water flow for efficient cooling
  • Bearings made of heat-treated carbon or carburized steel are sealed and lubricated to ensure smooth performance throughout units life
  • Assembled with new, high-quality unitized shaft seals to prevent premature leakage
  • Supplied with gasket and other seals/gaskets as applicable per application to help complete the job
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

NPW – Water Pump (Part No.G300064091NPW)

Water Pump

from

$76.27
The NPW water pump is a 100% new replacement and contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced impeller design.
  • Quality cast housing.
  • Precision bearings.
  • Resistant to corrosion.
  • Unitized bearing assembly.
See More

FAE – Engine Coolant Temperature Sensor (Part No.C602060805FAE)

Engine Coolant Temperature Sensor

from

$24.59
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1203)

Coolant Temperature Sensor with O-Ring

from

$38.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)

Radiator Cap: 16 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Engine Coolant Thermostat Housing Cover (Part No.G4011120690DOR)

Engine Coolant Thermostat Housing Cover

from

$27.99
Dorman’s Engine Coolant Thermostat Housing has improved durability and resistance. It withstands the extreme changes in temperature that frequently cause housing to become brittle, crack and leak. Maintain the steady flow of coolant and lessen the chances of overheating.

Product Features:
  • Direct replacement for a proper fit every time
  • Hoses slide on for easy installation
  • High-quality plastic or metal construction
  • Includes all hardware necessary for a complete repair (where applicable)
See More

Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)

Fuel Injector O-Ring

from

$1.24
Fuel Injector O-Ring

KAI – Radiator (Part No.RAD2956)

Radiator

from

$204.99
New Platinum Pro Radiator, 3.5 Liter Engine, Automatic Transmission

Product Features:
  • 3.5 Liter Engine, Automatic Transmission, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.812956)

Radiator: With Transmission Oil Cooler

from

$249.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle¿s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Motorad – Integrated Thermostat Housing: With Seal, 172 Degrees (Part No.951-172)

Integrated Thermostat Housing: With Seal, 172 Degrees

from

$37.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Dorman – Thermostat Assembly: Includes Gasket, Housing, and Thermostat, 180 Degrees (Part No.902-5836)

Thermostat Assembly: Includes Gasket, Housing, and Thermostat, 180 Degrees

from

$49.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

TYC Genera – A/C Condenser Fan Motor (Part No.R1031120854TYC)

A/C Condenser Fan Motor

from

$85.95
INCLUDES FAN MOTOR TYC brand Cooling Fan Motors feature premium grade ball bearings and permanent magnets to ensure longest-lasting performance under the most extreme conditions. TYC Cooling Fan Motor designs are put through a multitude of tests, like corrosion, moisture, vibration, high to low temp operation, to name to a few. At TYC/Genera, every opportunity has been taken to build a replacement part that will install, perform and last as well as the OE part it replaces.

Product Features:
  • OE Quality fit and function
  • Premium grade ball bearings and permanent magnets
  • Thoroughly Tested
  • Performs and lasts as well as the OE part it replaces
See More

Dorman – Radiator Fan Assembly: Single, Cost Effective And Reliable (Part No.621-360)

Radiator Fan Assembly: Single, Cost Effective And Reliable

from

$117.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Mahle – Water Pump Hsng Gask (Part No.G3031252151MAH)

Water Pump Hsng Gask

from

$3.60
Water Pump Hsng Gask

Felpro – Engine Water Pump Gasket (Part No.35677)

Engine Water Pump Gasket

from

$3.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Felpro – Engine Coolant Temperature Sensor O-Ring (Part No.72926)

Engine Coolant Temperature Sensor O-Ring

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Ishino – Stone Engine Coolant Thermostat Housing Gasket (Part No.G4020184565ISH)

Stone Engine Coolant Thermostat Housing Gasket

from

$1.73
The Ishino Stone Engine Coolant Thermostat Housing Gasket is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Felpro – THERMOSTAT GASKET (Part No.35741)

THERMOSTAT GASKET

from

$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

NOK – Water Pipe O-Ring (Part No.G202665192NOK)

Water Pipe O-Ring

from

$2.71
Water Pipe O-Ring

Felpro – WATER CROSS OVER MOUNT GASKET SET (Part No.ES 72774)

WATER CROSS OVER MOUNT GASKET SET

from

$16.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design for Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Quality that you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – O-RING (Part No.35162)

O-RING

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

2021 Honda Pilot Engine Cooling Parts

Maybe you’re in the middle of a full rebuild of that 2021 Honda Pilot. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 23 different Engine Cooling Parts in our inventory ranging from $1.24 to $222.99. That means you can find the exact parts or products you need to keep that 2021 Honda Pilot running smoothly.

Engine Cooling Parts are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 2021 Honda Pilot. Carquest Premium, Felpro, and KAI are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Engine Cooling Parts for your 2021 Honda Pilot, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 924 reviews in this category, some of the top rated parts include THERMOSTAT GASKET with 5.0 stars.

So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2021 Honda Pilot rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Engine Cooling Parts Brands To Make Your 2021 Honda Pilot Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2021 Honda Pilot demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Pilot the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.

Popular Sankei Switches Engine Cooling Parts

We carry Sankei Switches parts in our stock across Radiator Caps categories, plus more. For a 2021 Honda Pilot, our most popular Sankei Switches Engine Cooling Parts include:
Sankei Switches Radiator Cap
from $9.57
(1)
Sankei Switches Radiator Cap
Radiator Caps

Top 2021 Honda Pilot Engine Cooling Parts from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Engine Cooling Parts for your 2021 Honda Pilot. Popular Carquest Premium parts include:
Radiator Cap: 16 PSI
from $14.99
(137)
Radiator Cap: 16 PSI
Engine Coolant Thermostat Housing Caps
Engine Water Pump: New, Gasket/Seals Included
from $88.99
(13)
Engine Water Pump: New, Gasket/Seals Included
Water Pumps

FAQs for 2021 Honda Pilot Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2021 Honda Pilot?

Out of 23 Engine Cooling Parts for the 2021 Honda Pilot, the most popular in our inventory are:
O-RING
from $6.49
(2)
O-RING
Thermostat Seals
Coolant Temperature Sensor with O-Ring
from $38.99
This product is not rated
Coolant Temperature Sensor with O-Ring
Coolant Temperature Sensors
Engine Water Pump Gasket
from $3.79
This product is not rated
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated 2021 Honda Pilot Engine Cooling Parts?

Top-rated Engine Cooling Parts for your 2021 Honda Pilot based on customer reviews/ratings are:
THERMOSTAT GASKET
from $4.29
(1)
THERMOSTAT GASKET
“Works for my 05 accord, 2.4L k24”