2021 GMC Yukon XL Performance and Racing Products

The K&N 57-3082 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Chevy Suburban, Tahoe, Silverado 1500 and GMC Yukon/Denali/XL as well as Cadillac Escalade and Escalade ESV models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hoses. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Pro 5R Filter Media
• 5-Layer Progressive Cotton Gauze Media
• Washable And Reusable
• Huge 5 in. Flange w/Inverted Top Air Filter

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• Pro DRY S Filter Media
• 3 Layer Synthetic Oil-Free Media
• Washable And Reusable
• Huge 5 in. Flange w/Inverted Top Air Filter

8″ Tall Air Filter:This intake system utilizes an oil free, 8″ tall inverted top conical 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum airflow and performance.Mandrel-Bent Tubing:One-Piece 3-1/2″ Mandrel-Bent Powder-Coated matte gray aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque.One-Piece Heat Shield:Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation.3-Angle Adaptor:The 3-angle adaptor is used to speed up the airflow after the air filter for improved performance and throttle response.Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.Note 1: Does NOT fit eAssist models.

Product Features:

• Dyno-Proven Gains up to +18 HP and +23 Lbs. x Ft. TQ
• Outflows Factory Intake by 55%
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• 3-1/2″ Mandrel-bent Powder-coated matte gray aluminum intake tube improves volumetric efficiency for better performance

K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your Silverado / Tahoe / Escalade / Suburban and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
• DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
• IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N¿s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
• IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N┐s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
• BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty.
• HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N¿s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
• HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N┐s red filter oil to absorb dirt & dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100k miles under normal highway conditions.
• EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
• MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.

Magnum FORCE Stage-2 Cold Air Intake Systems provide an open-element design that showcase large air filters and produce a bolder engine tone than other intake designs. The open accessible design makes monitoring and servicing the air filter a breeze, while adding an aggressive style to your engine bay. The PRO 5R Air Filter provides maximum air flow resulting in the highest horsepower and torque gains, while maintaining an excellent airflow and 98.6% filter efficiency best suited for street and track use.

Product Features:

• Powder-Coated One Piece Heat-shield utilizes stock mounting locations
• 3-angle filter adaptor increases air velocity after the air filter for improved performance and throttle response
• Mandrel-Bent Powder-coated aluminum intake tube improves performance
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• WILL NOT VOID VEHICLE WARRANTY

The K&N AirCharger air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with an inverted dome topped K&N high-flow air filter and a heat shield that replaces the factory air box. This allows cooler, denser air to be directed through a custom molded intake tube into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Unique One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Large 5-Layer Performance Air Filter:This Momentum XP intake system was designed around the largest filter possible to allow maximum performance and filtration. Its unique filter-to-housing interface (US PAT 9440175) not only makes for a simple installation, but also allows for a large inverted 3.8″x 9″ air filter. The filter’s Pro 5R media features five progressively finer porosity cotton gauze layers that provide maximum airflow and performance. Mandrel-Bent Tubing:A one piece 3.5″ mandrel-bent wrinkle-black powder-coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Premium Hardware:Premium stainless-steel t-bolt clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Outflows factory intake by 30%
• Built-in sight window provides easy filter inspection without disassembly
• Unique filter-to-housing interface for easy installation (US PAT 9440175)
• Enjoy lifelong performance with a washable and reusable Pro 5R air filter

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro DRY S Air Filter For Maximum Convenience
• 3 Layer Of Progressive Non-Synthetic Oil Media Air Filter
• 100% Polyurethane For Long Life
• Washable And Reusable Air Filter

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Pre-oiled
• 360 Deg. Radial Flow A/F
• 5 Layer Cotton Gauze Media