2021 Chevrolet Suburban Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 2021 Chevrolet Suburbans

Accel – Wire:X9000 Ls Ceramic 180 11In (Part No.9059C)

Wire:X9000 Ls Ceramic 180 11In

from

$183.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit. In addition to 1997-2015 Gen 3/4 LS, also a direct fit for Gen V GM engines: 2015-2016 Cadillac Escalade 6.2L 2016 Chevrolet Camaro 6.2L 2014-2016 Chevrolet Corvette 6.2L 2015-2016 Chevrolet Corvette Z06 6.2L 2014-2016 Chevrolet Silverado 1500 4.3L/5.3L/6.2L 2015-2016 Chevrolet Suburban 5.3L 2015-2016 Chevrolet Tahoe 5.3L 2014-2016 GMC Sierra 1500 4.3L/5.3L/6.2L 2015-2016 GMC Yukon 5.3L/6.2L

Product Features:
  • Total length= 12″
  • Straight Spark Plug Boot
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
See More

GM Genuine Parts – Sparkplug Wire Kit (Part No.19431551)

Sparkplug Wire Kit

from

$94.99
Maintain your Chevrolet, Buick, GMC, or Cadillac vehicle with a Genuine GM Spark Plug Wire Set. This set consists of a group of wires encased in an insulating material, as well as connectors and insulating boots. They transfer high voltage pulses between the voltage source, the distributor, and your vehicle’s spark plug. Only Genuine GM Parts are tested to meet GM Original Equipment standards and are designed specifically to fit your vehicle.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • Designed, engineered, tested, and warranted for GM vehicles
  • Precise fit for ease of installation
  • For proper installation, locate your nearest GM dealer, independent service center, or body shop
See More

Accel – 8Mm Super Stock Graphite Cust (Part No.4042)

8Mm Super Stock Graphite Cust

from

$79.99
These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:
  • Graphite supression eliminates RFI/EMI
  • 3,000 to 7,000 ohms per foot of resistance
  • Silicone Spark Plug Boots
  • 450 Degree Temperature Rating
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket (Part No.31593)

Wire Set; Black Super Conductor; Small Block Chevy; Socket

from

$199.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.12623095)

Ignition Knock (Detonation) Sensor

from

$37.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine control module (ECM) to adjust timing
  • Helps prevent damage to the engine caused by pre-ignition
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Knock (Detonation) Sensor with Bolt (Part No.EKC1007)

Ignition Knock (Detonation) Sensor with Bolt

from

$28.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

GM Genuine Parts – Spark Plug Wire (Part No.12716289)

Spark Plug Wire

from

$22.99
GM Genuine Parts Genuine GM Spark Plug Wires are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These wires are a single wire encased in an insulating material, and contains connectors and insulating boots. It transfers high voltage pulses between the voltage source, the distributor, and your vehicle’s spark plug. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Cap; under Manif (Part No.5564)

Wire Set; Street Fire; SBC; Socket Cap; under Manif

from

$71.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8328)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$35.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)

Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set

from

$71.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450° F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
See More

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5041K)

8Mm Super Stock Spiral Uni Bk

from

$112.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9508N)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$69.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

NGK – Standard Nickel Spark Plug (BR6ES): Reliable OE Performance (Part No.4922)

Standard Nickel Spark Plug (BR6ES): Reliable OE Performance

from

$5.99
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • Triple Gasket Sealing: Prevents combustion gas leakage for enhanced engine efficiency.
See More

Motorcraft – Iridium Spark Plug: Enhances Durability & Reduces Fuel Consumption (Part No.SP-532)

Iridium Spark Plug: Enhances Durability & Reduces Fuel Consumption

from

$10.99
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. With an exact fit for Ford, Lincoln, and Mercury vehicles, they are resistant to oxidation and arc erosion, featuring a multi-rib insulator to protect against misfire. Designed with high-quality materials, including an iridium center electrode tip and a platinum ground electrode tip, Motorcraft Spark Plugs offer service intervals of up to 100,000 miles and help prevent false check engine lights. Backed by Motorcraft’s Service Parts Warranty, these spark plugs deliver reliable performance for a broad range of applications, including domestic and import cars and trucks of all makes and sizes.

Product Features:
  • Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
  • Backed by Motorcraft’s Service Parts Warranty
  • Exact fit for Ford, Lincoln and Mercury vehicles
  • Resistant to oxidation and arc erosion.
  • Multi-rib insulator protects against misfire.
  • Service intervals of up to 100,000 miles.
  • Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
  • Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
  • Motorcraft ignition components help prevent false check engine lights.
  • High-Quality Materials: Features an iridium center electrode tip and a platinum ground electrode tip, ensuring reliable performance and resistance to oxidation and arc erosion.
See More

Champion – Copper Plus Spark Plug (J6C): Dependable Performance & Durability (Part No.823)

Copper Plus Spark Plug (J6C): Dependable Performance & Durability

from

$3.29
The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. Its nickel-tipped center and ground electrodes enhance conductivity while resisting fouling, ensuring reliable ignition under various conditions. Built to ISO and SAE Standards, this spark plug delivers proven performance and superior corrosion resistance, making it a trusted choice for maintaining engine efficiency. With a flat seat type and standard-grade design, it offers compatibility with a wide range of applications, providing excellent value for long-term use.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

Champion – Copper Plus Small Engine Spark Plug (J8C): Dependable Performance & Durability (Part No.841)

Copper Plus Small Engine Spark Plug (J8C): Dependable Performance & Durability

from

$3.79
The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement for small engines. Featuring a copper core center electrode, it ensures precise heat control and increased conductivity, promoting longer life and consistent wear. Its nickel center and ground electrode tips, combined with a flat seat design, deliver enhanced reliability and superior performance. Built to ISO and SAE Standards, this spark plug resists fouling and offers exceptional corrosion resistance, ensuring it withstands tough conditions. Whether you’re maintaining a small engine or seeking a reliable replacement, this spark plug provides proven performance and value.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • OE type replacement plug
  • Resists fouling
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Increased Conductivity and Heat Control: The Champion Copper Plus Small Engine Spark Plug features a copper core electrode that enhances conductivity and heat management, ensuring good overall wear.
  • Enhanced Reliability: With a nickel center electrode tip material and flat seat type, this spark plug provides enhanced reliability and consistent performance for small engines.
See More

ACDelco – Conventional Nickel Tip Spark Plug: Maximizes Durability & Heat Transfer (Part No.R45)

Conventional Nickel Tip Spark Plug: Maximizes Durability & Heat Transfer

from

$6.29
ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These Conventional Spark Plugs are designed for reliability and efficient performance, and are the high quality replacements for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:
  • Black Onyx coating helps reduce corrosion
  • Copper core provides great heat transfer and helps maximize plug durability
  • Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
  • Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
  • Available for use in Marine applications
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • Nickel Center Electrode Tip: Designed with a nickel center electrode tip, these spark plugs ensure efficient performance and longevity.
  • Outstanding Suppression Characteristics: These spark plugs offer excellent suppression characteristics, contributing to their reliable performance in various driving conditions.
  • Resistor Type with Gasket Seat: Equipped with a resistor type and a gasket seat, these spark plugs are designed for optimal performance and compatibility with a wide range of vehicles.
See More

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Super Stock Elect Coil Chrome

from

$79.99
Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:
  • Engineered for higher energy output
  • Improved throttle responce
  • More high RPM power
  • Chrome Plated
See More

MSD Ignition – Coils (Part No.826683)

Coils

from

$549.99
Coils

NGK – Premium Coil Near Plug Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48881)

Premium Coil Near Plug Type Ignition Coil: Meets or Exceeds OE Specifications

from

$138.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil (Part No.EBA1147)

Ignition Coil

from

$86.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Delphi – Ignition Coil (Part No.GN10165)

Ignition Coil

from

$91.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

GM Genuine Parts – Diesel Engine Combustion Air Heater Glow Plug (Part No.73G)

Diesel Engine Combustion Air Heater Glow Plug

from

$38.99
GM Genuine Parts Diesel Glow Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Upgrade your 2021 Chevrolet Suburban with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2021 Chevrolet Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 21 Ignition and Tune-Up Products for the 2021 Chevrolet Suburban, designed to meet your needs without breaking the bank. From Ignition Wire replacements to Glow Plugs upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2021 Chevrolet Suburban at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $5.99 to $138.99, with an average price of $38.54. Our 21 Ignition and Tune-Up Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 2021 Chevrolet Suburban without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2021 Chevrolet Suburban, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, ACDelco, Autolite, and more. NGK Ignition and Tune-Up Products start at just $10.49 and boast an impressive 4.8 stars average rating from customers. ACDelco and Autolite also bring quality to the table, with Ignition and Tune-Up Products available starting at $10.99, and at an average 4.7 stars rating. With 912 customer reviews and counting, our 2021 Chevrolet Suburban Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2021 Chevrolet Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your Suburban in top shape, all in one place. Start shopping confidently below for your 2021 Chevrolet Suburban!

Best-Selling Ignition Wires for 2021 Chevrolet Suburbans

Enhance the driving experience in your Chevrolet with 1 quality Ignition Wire components, starting at $50.99.

Carquest Premium – Ignition Wire Set (Part No.35-8357)

Ignition Wire Set

from

$50.99
Ignition Wire Set

Most Popular 2021 Chevrolet Suburban Glow Plugs

Customize your Chevrolet with 1 Glow Plugs products like Diesel Glow Plugs, all priced under $38.99.

GM Genuine Parts – Diesel Engine Combustion Air Heater Glow Plug (Part No.73G)

Diesel Engine Combustion Air Heater Glow Plug

from

$38.99
GM Genuine Parts Diesel Glow Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Top Picks for 2021 Chevrolet Suburban Ignition Sensors

Upgrade Chevrolet Suburbans with top-quality Ignition Sensors parts, including 2 OEM and aftermarket selections for your 2021 model.

GM Genuine Parts – Ignition Knock (Detonation) Sensor (Part No.12623095)

Ignition Knock (Detonation) Sensor

from

$37.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Sends signals to the engine control module (ECM) to adjust timing
  • Helps prevent damage to the engine caused by pre-ignition
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Ignition Knock (Detonation) Sensor with Bolt (Part No.EKC1007)

Ignition Knock (Detonation) Sensor with Bolt

from

$28.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All Carquest Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

In-Demand Ignition Coils and Boots for 2021 Chevrolet Suburbans

Select from 5 premium Ignition Coils and Boots parts for your 2021 Chevrolet Suburban, with prices ranging from $73.99 to $138.99.

Carquest Premium – Ignition Coil (Part No.EBA1147)

Ignition Coil

from

$86.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

NGK – Premium Coil Near Plug Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48881)

Premium Coil Near Plug Type Ignition Coil: Meets or Exceeds OE Specifications

from

$138.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil (Part No.EBA1102)

Ignition Coil

from

$73.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Delphi – Ignition Coil (Part No.GN10165)

Ignition Coil

from

$91.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

GM Genuine Parts – Sparkplug Wire Kit (Part No.19431551)

Sparkplug Wire Kit

from

$94.99
Maintain your Chevrolet, Buick, GMC, or Cadillac vehicle with a Genuine GM Spark Plug Wire Set. This set consists of a group of wires encased in an insulating material, as well as connectors and insulating boots. They transfer high voltage pulses between the voltage source, the distributor, and your vehicle’s spark plug. Only Genuine GM Parts are tested to meet GM Original Equipment standards and are designed specifically to fit your vehicle.

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • Designed, engineered, tested, and warranted for GM vehicles
  • Precise fit for ease of installation
  • For proper installation, locate your nearest GM dealer, independent service center, or body shop
See More

Most Sold 2021 Chevrolet Suburban Spark Plugs

Explore our best-selling Chevrolet parts for the 2021 Suburban among 12 OEM and aftermarket options starting from $5.99.

NGK – Ruthenium HX Spark Plug (LTR5AHX): High Ignitability & Durability (Part No.90220)

Ruthenium HX Spark Plug (LTR5AHX): High Ignitability & Durability

from

$15.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug, Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:
  • HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
  • RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
  • PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
  • Specialized OEM Tip Designs: Features patented DFE and PSPE tip designs for superior ignitability.
  • Industry-Leading Durability: Ruthenium center electrode ensures exceptional durability and longevity.
  • Advanced OE Technology: Created from advanced Original Equipment technology for modern vehicles.
See More

NGK – Iridium IX Spark Plug (LTR5IX-11): Extreme Ignitability & Durability (Part No.4344)

Iridium IX Spark Plug (LTR5IX-11): Extreme Ignitability & Durability

from

$13.99
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
  • Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
  • Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.
See More

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.74)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

from

$8.49
The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.74 is a 14mm, 1.000 reach plug with a taper seat. It fits a wide variety of late model applications, especially Ford applications. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:
  • E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
  • Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
  • Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
  • Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
  • E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
  • The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
  • Enhanced Heat Transfer: Three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder.
  • Wide Compatibility: The E3.74 spark plug is a 14mm, 1.000 reach plug with a taper seat, fitting a wide variety of late model applications, especially Ford vehicles.
  • Eco-Friendly Performance: Proven to reduce fuel consumption and improve hydrocarbon emissions, contributing to a cleaner environment.
  • Long-Term Efficiency: The Diamond FIRE side wire is designed for long-term use, maintaining increased power and reduced fuel consumption over time.
See More

ACDelco – Iridium Spark Plug: Advanced Durability & Reliable Performance (Part No.41-114)

Iridium Spark Plug: Advanced Durability & Reliable Performance

from

$13.49
ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Iridium is the latest in spark plug technology and is an exact replacement for vehicles’ original components
  • Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
  • Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
  • Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
  • Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

NGK – G-Power Platinum Spark Plug (LTR5GP): Enhanced Durability & Efficiency (Part No.5019)

G-Power Platinum Spark Plug (LTR5GP): Enhanced Durability & Efficiency

from

$10.49
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
  • Enhanced Vehicle Performance: Experience faster starts and quicker acceleration compared to conventional nickel spark plugs, making it an excellent upgrade for vehicles originally using nickel alloy spark plugs.
  • Economical Upgrade: NGK G-Power Platinum spark plugs provide a cost-effective solution for upgrading your vehicle’s spark plugs without compromising on quality.
  • Compatibility and Versatility: Ideal for a wide range of vehicles, these spark plugs are a perfect fit for those looking to replace their nickel alloy spark plugs with a more durable and efficient option.
See More

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP6043)

Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition

from

$10.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
  • Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
  • Engineered in the USA: Designed with over 100 years of Autolite’s engineering experience for superior quality and performance.
  • Proven Track Record: Autolite has sold over 11 billion spark plugs, showcasing a legacy of reliability and trust.
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITL16TT (Part No.4717)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, ITL16TT

from

$18.99
Experience the perfect blend of durability and high performance with this Iridium TT Spark Plug. Engineered with a 0.4mm Iridium Center Electrode – the world’s smallest diameter – it maximizes firing potential for unmatched ignition efficiency. The 0.7mm Needle Tip Ground Electrode enhances spark energy while minimizing heat quenching, ensuring consistent performance. Built with DENSO’s patented Iridium-Rhodium alloy formula, this spark plug boasts the highest concentration of iridium for exceptional durability, withstanding temperatures over 4000 Deg F. Its advanced 360-degree laser welding process guarantees a robust bond and structural integrity. Designed for ultimate endurance, it delivers over 100,000 miles of reliable performance while improving fuel economy and reducing emissions. The innovative Twin-Tip Technology combines a fine-wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode, offering OE-style reliability with the added power and torque of a high-performance plug. Featuring a tapered seat type and premium materials, this spark plug is the ideal choice for drivers seeking long-lasting quality and enhanced engine efficiency.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power and Torque of high performance.
  • Withstands temperatures greater than 4000 degree Fahrenheit
  • Iridium TT
  • Ultimate Endurance and Power: The DENSO Iridium TT Spark Plug features a 0.7mm Iridium Tip, ensuring over 100,000 miles of uncompromised performance.
  • Advanced Twin-Tip Technology: Developed from Original Equipment Specification Super Ignition Plug (SIP) design, combining a Fine Wire Iridium Center Electrode with a Needle Tip Platinum Ground Electrode.
  • Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
  • Premium Materials: Features an Iridium Center Electrode Tip and a Tapered Seat Type for optimal performance and durability.
See More

Autolite Iridium – Iridium Ultra Fine Wire Spark Plug: Laser Welded for Precision (Part No.AI6043)

Iridium Ultra Fine Wire Spark Plug: Laser Welded for Precision

from

$10.99
Autolite Iridium Ultra Laser Fine wire Spark Plugs are one of our brand’s most technologically advanced products. These spark plugs provide superior durability, more focused ignition with better overall ignitability for optimum performance. Autolite Spark Plugs are the best alternative to OE spark plugs, offering OE fit form and function supporting all foreign and domestic makes and models at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs in the world.

Product Features:
  • Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
  • A laser-welded 0.5mm pure iridium finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
  • Nickel-plated shell to resist corrosion.
  • High-alumina ceramic insulator for increased strength.
  • Laser welded 0.5mm Iridium finewire center electrode.
  • Proprietary platinum sidewire technology.
  • Superior Durability: Autolite Iridium Ultra Laser Fine wire Spark Plugs are designed to last longer, providing extended service life compared to standard spark plugs.
  • OE Fit and Function: Autolite Spark Plugs are the best alternative to original equipment (OE) spark plugs, offering perfect fit, form, and function for all foreign and domestic makes and models.
  • High-Quality Construction: As a leading supplier of spark plugs globally, Autolite ensures the highest quality ignition products for both the automotive aftermarket and original equipment manufacturers.
  • Value Pricing: Despite their advanced technology and superior performance, Autolite Iridium Ultra Laser Fine wire Spark Plugs are available at a value price, making them an economical choice for vehicle maintenance.
See More

Autolite – Double Platinum Spark Plug: Enhanced Durability & Longer Life (Part No.APP6043)

Double Platinum Spark Plug: Enhanced Durability & Longer Life

from

$5.99
Autolite Double Platinum spark plugs are engineered for exceptional performance and durability, making them a trusted choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, these spark plugs effectively prevent gap erosion, reduce misfires, and extend service life. The yttrium-enhanced ground electrode ensures superior heat transfer, allowing the spark plug to withstand high temperatures and pressure for greater durability. With a high alumina ceramic insulator, these plugs offer optimum thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. Designed with a long projection center electrode and tapered seat type, these performance-grade spark plugs deliver consistent ignition and enhanced efficiency. Autolite’s proven quality, backed by over 11 billion spark plugs sold, guarantees reliability for automotive enthusiasts and professionals alike. Upgrade to Autolite Double Platinum spark plugs for superior performance and longer-lasting durability.

Product Features:
  • Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
  • The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
  • Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
  • The multi-rib insulator prevents flash-over.
  • Proven Quality: With over 11 billion spark plugs sold, Autolite delivers exceptional quality and reliability, making it a trusted choice for automotive enthusiasts and professionals.
See More

NGK – Laser Iridium Spark Plug (ILTR5E11): Superior Performance & Durability (Part No.91418)

Laser Iridium Spark Plug (ILTR5E11): Superior Performance & Durability

from

$21.99
NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
  • Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance.
  • High-Quality Materials: Constructed with high-grade pure alumina ceramic and a 98% pure copper core to prevent overheating and ensure reliable starts.
  • OE Application Specific: Engineered specifically for Original Equipment (OE) applications, meeting the highest standards for quality and durability.
  • Fine Wire Tip Design: The fine wire tip design of the ILTR5E11 model ensures efficient and consistent spark delivery.
See More

GM Genuine Parts – Spark Plug Wire (Part No.12716289)

Spark Plug Wire

from

$22.99
GM Genuine Parts Genuine GM Spark Plug Wires are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These wires are a single wire encased in an insulating material, and contains connectors and insulating boots. It transfers high voltage pulses between the voltage source, the distributor, and your vehicle’s spark plug. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Durable to help transfer high voltage pulses without damage
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

DENSO – Iridium Long-Life Spark Plug: OE Performance, ZTJ16VR10 (Part No.3539)

Iridium Long-Life Spark Plug: OE Performance, ZTJ16VR10

from

$10.99
The Iridium Long-Life Spark Plug is engineered to meet the highest OE standards for performance, durability, and emissions, making it a reliable choice for your vehicle. Featuring DENSO’s patented Iridium Alloy with a fine wire center electrode, this spark plug delivers sustained spark performance for over 100,000 miles, lasting up to three times longer than conventional plugs. Its platinum ground electrode ensures extended life, while the 360-degree laser welding process guarantees a robust bond and structural strength. Designed to endure extreme temperatures exceeding 4,000 degrees Fahrenheit, it is ideal for high-performance ignition systems and special fuel setups. With a tapered seat type and iridium center electrode tip material, this spark plug offers exceptional durability and efficiency, providing long-lasting value for your vehicle’s ignition system.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90 percent Ir) and fine wire center electrode
  • Platinum ground electrode for extended life
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life
See More

Top-Rated Ignition and Tune-Up Products Brands For Your 2021 Chevrolet Suburban

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2021 Chevrolet Suburbans. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, ACDelco, and Autolite, and more. Ignition and Tune-Up Products from these brands that fit a 2021 Suburban start at just $10.49 and are rated as high as 4.8 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 2021 Chevrolet Suburban Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2021 Chevrolet Suburban, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 2021 Chevrolet Suburban. With over 3 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.49, with an average price of just $13.49. Plus, with over 81 customer reviews and an average rating of 4.8 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Ruthenium HX Spark Plug (LTR5AHX): High Ignitability & Durability
from $15.99
(1)
Ruthenium HX Spark Plug (LTR5AHX): High Ignitability & Durability
“really good spark plugs and provides the best for money option if your your vehicle to last a long time.”

Popular ACDelco 2021 Chevrolet Suburban Ignition and Tune-Up Products

ACDelco auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2021 Chevrolet Suburban owner should feel confident when installing genuine ACDelco parts in their vehicle. To ensure the best fit and performance for your 2021 Suburban, Advance Auto Parts carries a full inventory of 1 ACDelco Ignition and Tune-Up Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these ACDelco Ignition and Tune-Up Products range up to $13.49, plus, with more than 32 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.
Iridium Spark Plug: Advanced Durability & Reliable Performance
from $13.49
(32)
Iridium Spark Plug: Advanced Durability & Reliable Performance
“Functions as it should without any discrepancies.”

FAQs for 2021 Chevrolet Suburban Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2021 Chevrolet Suburbans?

Out of 21 Ignition and Tune-Up Products that fit 2021 Chevrolet Suburbans, the following parts are the top sellers:

What’s the price range for 2021 Chevrolet Suburban Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2021 Chevrolet Suburban start at $5.99 and go up to $138.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2021 Chevrolet Suburban?

The average price for Ignition and Tune-Up Products for the 2021 Chevrolet Suburban is $38.54. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chevrolet Suburban model years?

Yes, we currently carry Ignition and Tune-Up Products for 30 model years of Chevrolet Suburbans between 1947 and 2026. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 1966.

What are the cheapest Ignition and Tune-Up Products for my 2021 Chevrolet Suburban?

What are the top-rated Ignition and Tune-Up Products that fit the 2021 Chevrolet Suburban?

Out of 912 reviews by customers, our 2021 Chevrolet Suburban Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2021 Chevrolet Suburban and their top-rated products:

What types of Ignition and Tune-Up Products do you sell for my 2021 Chevrolet Suburban?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2021 Chevrolet Suburban:

Can I get help with 2021 Chevrolet Suburban Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Ignition and Tune-Up Products and more.

What is your return policy for Chevrolet Suburban Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Suburban Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.