2021 Chevrolet Suburban Engine Parts

Essential Engine Parts for 2021 Chevrolet Suburbans

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile

from

$164.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 Psi Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

ACDelco – Engine Crankshaft Position Sensor (Part No.12669636)

Engine Crankshaft Position Sensor

from

$39.99
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Engine Valve Lifter

from

$24.79
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
  • New OEM riveted pin retaining design
See More

Felpro – O-RING (Part No.73193)

O-RING

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Cloyes Gear – Engine Timing Chain (Part No.C163)

Engine Timing Chain

from

$21.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Melling Select Performnce – Stock Replacement Oil Galley Plug (Part No.MOGP-200HP)

Stock Replacement Oil Galley Plug

from

$38.99
Made in U.S.A. Melling performance provides oil galley plugs for LS engine block rebuilds and repairs. Our dual o-ring oil galley improve oil flow and pressure in the engine block where needed, as well as act as an added barrier to block dirty oil from bypassing the filter. Melling performance oil galley plugs are manufactured from billet aluminum to outperform stock replacement oil galley plugs to get the most performance and protection out of your engine.

Product Features:
  • 3.042 Inchs Long
  • Double O-Ring Design To Reduce Oil Bypass
  • Black anodized billet 6061-T6 aluminum
  • Improves Oil Flow, Oil Pressure, And Completely Blocks Dirty Engine Oil From Bypassing The Filter
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50189 C)

Engine Valve Cover Gasket Set

from

$13.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

National – Crankshaft Seal (Part No.711130)

Crankshaft Seal

from

$20.99
Crankshaft Seal

Carquest Premium – New MAP SENSOR (Part No.ECE1033)

New MAP SENSOR

from

$63.99
The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.

Product Features:
  • Made to OE spec to ensure a proper fit, form and function.
  • Sensors are engineered for precision performance, durability and a long service life.
  • All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.
See More

Cloyes Gear – Engine Timing Crankshaft Gear (Part No.2537)

Engine Timing Crankshaft Gear

from

$17.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Helical tooth form for quiet operation and precision machined bore for true fit
  • CAD designed and manufactured using premium materials to ensure optimal performance
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Mahle – Camshaft Retainer (Part No.A4355425751MAH)

Camshaft Retainer

from

$35.08
Camshaft Retainer

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71039)

Engine Valve Stem Oil Seal Set

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

ACDelco – GM Original Equipment Engine Oil Pan Gasket (Part No.A6130659422ACD)

GM Original Equipment Engine Oil Pan Gasket

from

$19.12
ACDelco GM Original Equipment Engine Oil Pan Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 11829-1)

Engine Crankshaft Seal Kit

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289666ACD)

GM Original Equipment Fuel Pump Tank Seal

from

$17.61
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Crank Seal Cover Gas (Part No.A2161579544ACD)

Crank Seal Cover Gas

from

$12.11
Crank Seal Cover Gas

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Stock Replacement Engine Assembly Lubricant

from

$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1054)

Camshaft Sensor

from

$45.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

NTK – Camshaft Position Sensor (Part No.EC0321)

Camshaft Position Sensor

from

$52.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Felpro – OIL PAN GASKET SET (Part No.OS 30126 C-1)

OIL PAN GASKET SET

from

$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Oil Pan Gasket Set: Cork-Rubber, 4 Piece Set (Part No.OS 5197 C-2)

Oil Pan Gasket Set: Cork-Rubber, 4 Piece Set

from

$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.7733 PT-2)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26744 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$61.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY NEXTGEN COATING TECHNOLOGY — Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
  • UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL — Precise embossed sealing beads at vital areas to eliminate leak paths
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – CAMSHAFT THRUST PLATE SEAL SET (Part No.ES 73115)

CAMSHAFT THRUST PLATE SEAL SET

from

$41.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Cloyes Performance – Engine Camshaft Thrust Plate (Part No.9-220B)

Engine Camshaft Thrust Plate

from

$18.99
0.150″ Thick. Bronze Thrust Washer.

Product Features:
  • 0.150″ Thick
  • Bronze Thrust Washer.
See More

Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)

Engine Oil Level Sensor

from

$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 2021 Chevrolet Suburban with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2021 Chevrolet Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Engine Parts for the 2021 Chevrolet Suburban, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2021 Chevrolet Suburban at great prices. Our Engine Parts inventory for this model ranges from just $4.49 to $113.99, with an average price of $36.51. Our 32 Engine Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2021 Chevrolet Suburban without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2021 Chevrolet Suburban, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, and more. FELPRO Engine Parts start at just $4.49 and boast an impressive 5 stars average rating from customers. With 9 customer reviews and counting, our 2021 Chevrolet Suburban Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2021 Chevrolet Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your Suburban in top shape, all in one place. Start shopping confidently below for your 2021 Chevrolet Suburban!

Best-Selling Camshafts for 2021 Chevrolet Suburbans

Enhance the driving experience in your Chevrolet with 6 quality Camshaft components, starting at $18.99.

Mahle – Camshaft Retainer (Part No.A4355425751MAH)

Camshaft Retainer

from

$35.08
Camshaft Retainer

ACDelco – Engine Camshaft Position Sensor (Part No.12623093)

Engine Camshaft Position Sensor

from

$29.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – CAMSHAFT THRUST PLATE SEAL SET (Part No.ES 73115)

CAMSHAFT THRUST PLATE SEAL SET

from

$41.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Stock Replacement Engine Assembly Lubricant

from

$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

Dorman – Magnetic Camshaft Position Sensor (Part No.962-277)

Magnetic Camshaft Position Sensor

from

$21.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1959)

Engine Camshaft Position Sensor

from

$18.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Most Popular 2021 Chevrolet Suburban Engine Gaskets and Seals

Customize your Chevrolet with 9 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Rear Main Seal Sets, all priced under $102.99.

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71039)

Engine Valve Stem Oil Seal Set

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

ACDelco – Intake Manifold Gask (Part No.A8040580030ACD)

Intake Manifold Gask

from

$4.68
Intake Manifold Gask

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50907 R)

Engine Valve Cover Gasket Set

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to help ensure a consistent and long-life seal
  • PRECISE DESIGN — Engineered to work with the embossed cover and pan flanges
  • PREVENTS OVERTIGHTENING — Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

ACDelco – Valve Cover Gasket (Part No.A8030580015ACD)

Valve Cover Gasket

from

$8.35
Valve Cover Gasket

ACDelco – Oil Pan Gasket (Part No.A6130756311ACD)

Oil Pan Gasket

from

$9.94
Oil Pan Gasket

Dorman – Rear Main Seal Cover Kit (Part No.635-786)

Rear Main Seal Cover Kit

from

$102.99
This direct replacement rear main seal cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:
  • Direct replacement – this rear main seal cover matches the fit and function of the original equipment cover for a trouble-free installation
  • Durable construction – this rear main seal cover is made of quality materials for a reliable fit and enduring service life
  • Convenient solution – get a quality repair solution without the hassle of buying original equipment
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289666ACD)

GM Original Equipment Fuel Pump Tank Seal

from

$17.61
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Crank Seal Cover Gas (Part No.A2161579544ACD)

Crank Seal Cover Gas

from

$12.11
Crank Seal Cover Gas

GM Genuine Parts – Oil Pan Gasket (Part No.12666993)

Oil Pan Gasket

from

$5.49
GM Genuine Parts Engine Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Top Picks for 2021 Chevrolet Suburban Engine Timing Parts

Upgrade Chevrolet Suburbans with top-quality Engine Timing Parts parts, including 2 OEM and aftermarket selections for your 2021 model.

Cloyes Gear – Engine Timing Chain (Part No.9-4205)

Engine Timing Chain

from

$39.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S1111)

Engine Timing Crankshaft Sprocket

from

$68.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation.

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

In-Demand Engine Switches, Sensors and Relays for 2021 Chevrolet Suburbans

Select from 2 premium Engine Switches, Sensors and Relays parts for your 2021 Chevrolet Suburban, with prices ranging from $37.00 to $47.99.

Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)

Engine Oil Level Sensor

from

$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Camshaft Position Se (Part No.A4015458532ACD)

Camshaft Position Se

from

$37.00
Camshaft Position Se

Most Sold 2021 Chevrolet Suburban Valve Cover and Cylinder Heads

Explore our best-selling Chevrolet parts for the 2021 Suburban among 6 OEM and aftermarket options starting from $4.49.

ACDelco – Active Fuel Management Valve Lifter (Part No.12680871)

Active Fuel Management Valve Lifter

from

$83.99
ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Adjusts the valves on your vehicle’s engine for proper performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Felpro – O-RING (Part No.73193)

O-RING

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 73121)

Engine Cylinder Head Bolt Set

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26744 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$61.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY NEXTGEN COATING TECHNOLOGY — Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
  • UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL — Precise embossed sealing beads at vital areas to eliminate leak paths
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Elring – Cylinder Head Gasket (Part No.A8100580062ELR)

Cylinder Head Gasket

from

$92.94
Cylinder Head Gasket

Mahle – Cylinder Head Gasket (Part No.A8100580062MAH)

Cylinder Head Gasket

from

$90.52
Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head gaskets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials
  • Packaged in shrink wrapped tray
See More

Top-Rated Engine Parts Brands For Your 2021 Chevrolet Suburban

Shop for the best-rated brands offering Engine Parts and other products for your 2021 Chevrolet Suburbans. Below you’ll find some of our best rated Engine Parts from FELPRO, and more. Engine Parts from these brands that fit a 2021 Suburban start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2021 Chevrolet Suburban Engine Parts

When it comes to maintaining or upgrading your 2021 Chevrolet Suburban, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2021 Chevrolet Suburban. With over 8 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.49, with an average price of just $31.78. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Cylinder Head Bolt Set
from
$51.99
This product is not rated

Engine Cylinder Head Bolt Set

“”

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from
$61.99
This product is not rated

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

“”

O-RING
from
$4.49
This product is not rated

O-RING

“”

FAQs for 2021 Chevrolet Suburban Engine Parts

Which Engine Parts are best-sellers for 2021 Chevrolet Suburbans?

Out of 32 Engine Parts that fit 2021 Chevrolet Suburbans, the following parts are the top sellers:

What’s the price range for 2021 Chevrolet Suburban Engine Parts?

Engine Part prices for the 2021 Chevrolet Suburban start at $4.49 and go up to $113.99 for the most premium parts.

What’s the average price of a Engine Part for a 2021 Chevrolet Suburban?

The average price for Engine Parts for the 2021 Chevrolet Suburban is $36.51. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Suburban model years?

Yes, we currently carry Engine Parts for 30 model years of Chevrolet Suburbans between 1947 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 1966.

What are the cheapest Engine Parts for my 2021 Chevrolet Suburban?

The cheapest 2021 Chevrolet Suburban Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2021 Chevrolet Suburban?

Out of 9 reviews by customers, our 2021 Chevrolet Suburban Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2021 Chevrolet Suburban and their top-rated products:

What types of Engine Parts do you sell for my 2021 Chevrolet Suburban?

Can I get help with 2021 Chevrolet Suburban Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Suburban Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Suburban Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.