2021 BMW M240i Cooling and Climate Controls

Essential 2021 BMW M240i Cooling and Climate Controls

ATE – ABS Speed Sensor (Part No.N60302394263ATE)

ABS Speed Sensor

from

$121.14
ABS Speed Sensor

ATE – ABS Speed Sensor (Part No.N6030656708ATE)

ABS Speed Sensor

from

$139.68
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Carquest Premium – A/C Block Expansion Valve (Part No.T39493)

A/C Block Expansion Valve

from

$51.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Motorad – Radiator Cap: 20 PSI (Part No.T-64)

Radiator Cap: 20 PSI

from

$25.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T64)

Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.99
Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)

A/C Pressure Switch

from

$29.54
A/C Pressure Switch

Behr – Blower Motor Regulat (Part No.R2041447614BEH)

Blower Motor Regulat

from

$143.49
Blower Motor Regulat

Carquest Standard – Compressor Reman /Hannon (Part No.DW167365)

Compressor Reman /Hannon

from

$454.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:
  • Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
  • Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
  • Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
  • Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
  • Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
  • Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
  • Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
  • Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
  • Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
  • Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
See More

Carquest Premium – New Compressor (Part No.T168366)

New Compressor

from

$517.99
Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.

Product Features:
  • Every unit is 100% function and leak tested
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Very low friction coating used on swash plate to improve durability
  • PTFE coated pistons improve performance and reduce wear
  • Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
  • Matched high-quality needle-roller bearing ensures low friction and high load capability
  • Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant
See More

Valeo – Air Flap Actuator (Part No.R2046700055VAL)

Air Flap Actuator

from

$124.15
Air Flap Actuator

Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)

Oil Temperature Send

from

$56.96
Oil Temperature Send

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

AC Pressure Sensor

from

$85.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

KAI – Radiator Support (Part No.BM1225136C)

Radiator Support

from

$91.99
New CAPA Certified Standard Replacement Radiator Support Upper Support Panel, Made Of High Strength Steel

Product Features:
  • Made Of High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75064)

Blower Motor: With Wheel

from

$78.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – HEATER CORE (Part No.910708)

HEATER CORE

from

$147.99
HEATER CORE

2021 BMW M240i Cooling and Climate Controls

You count on your 2021 BMW M240i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 17 Cooling and Climate Controls ranging in price from $15.44 to $517.99, you’re sure to find everything you need for your 2021 BMW M240i.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 9 different brands like ATE, Original Equipment, and Carquest Premium. 2021 BMW M240i Cooling and Climate Controls start as low as $15.44!

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2021 BMW M240i below to get started!

FAQs for 2021 BMW M240i Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2021 BMW M240i?

Out of 17 Cooling and Climate Controls for the 2021 BMW M240i, the most popular in our inventory are:
ABS Speed Sensor
from $121.14
This product is not rated
ABS Speed Sensor
ABS Speed Sensors
Oil Temperature Send
from $56.96
This product is not rated
Oil Temperature Send
AC Outside Temperature Sensor
Blower Motor: With Wheel
from $78.99
This product is not rated
Blower Motor: With Wheel
Blower Motors