2020 Volvo XC90 Cooling and Climate Controls
More 2020 Volvo XC90 Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 2020 Volvo XC90, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 2020 Volvo XC90 Cooling and Climate Controls
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.1018-221)
from
$319.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Integrated Housing Thermostat- 195 Degrees w/ Seal (Part No.49449)
from
$89.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10262)
from
$19.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10244)
from
$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Victor Reinz – Engine Water Pump Gasket (Part No.71-37426-00)
from
$5.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Factory Air – Coolant Temp Sensor Switch (Part No.36424)
from
$34.05
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Color coded for easy identification
- Zinc coated terminal to resist corrosion
Rein – Temperature Sensor (Part No.ELC0081)
from
$15.99
Rein Automotive OE temperature sensors are made to factory specifications ensuring proper fit, form and function. The temperature sensor is used to report exhaust temperatures to the vehicle’s ECU. The vehicle uses this information to control engine and emission parameters. Rein temperature sensors include a vehicle specific connector that fits directly into the factory plug.
Product Features:
See More
Product Features:
- Direct OE replacement
- Designed to meet or exceed factory specifications
- Made using high quality materials
- Uses vehicle specific style connector for quick replacement.
FAE – Engine Coolant Temperature Sensor (Part No.C6020241786FAE)
from
$20.57
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
FAE – Water Temp. Sensor (Part No.C6020947111FAE)
from
$30.04
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – A/C New; w/ Clutch; w/ DKS17D Compressor (Part No.T58544)
from
$605.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
- New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
- The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
- All new compressors must pass a helium leak test and pump up function test prior to packaging.
- O-Rings and gaskets necessary for installation are included.
- O-Rings and gaskets necessary for installation are included.
Carquest Premium – New Compressor with Clutch, York-Diesel Kiki-Zexel-Seltec DCS17E (Part No.T58489)
from
$1442.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Endurance tested the equivalent of 50k miles
- Includes specific electrical connector to eliminate splicing
- Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
- For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
- Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance
DENSO – New Compressor With Clutch (Part No.471-5020)
from
$625.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.
Product Features:
See More
Product Features:
- DENSO is the world’s largest OE supplier of A/C compressors
- Each compressor is precision manufactured for exact replacement
- Designed for high output and extended durability
- Highest quality in the Aftermarket
Saleri – Saleri Water Pump (Part No.G3000178891SAL)
from
$69.40
WATER PUMPS for passenger cars and light commercial vehicles Direct focus on the quality of materials and internal components used in the manufacturing process is what sets Saleri apart from other brands. Special emphasis on selecting the correct OEM component suppliers for bearings and seals insures proper performance of the Water Pumps. Impeller material is chosen specifically by part number and application to match exactly what is being supplied by the car manufacturers. In addition Saleri offers water pumps with cast iron and steel impellers for specific applications where this material is still in use by the car makers. Saleri water pumps contains no remanufactured components and are manufactured to ensure high efficiency and optimal cooling under all conditions.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High quality OE bearings and seals
- Optimum cooling performance and longevity. Installation Instructions Provided
- Correct installation instructions are included and are the best way to reduce the risks of failure linked to the new water pump.
- Saleri uses pictograms in the new instructions that allow a single document to be clear and comprehensible.
- Saleri recommend using only the certified coolant indicated by the car makers and use of the correct percentage of glycol and demineralized water.
- Saleri is a leading supplier to many European vehicle manufacturers and is known for using the highest quality materials as well as quality, design and performance.
AISIN – OE Replacement Water Pump (Part No.G3000232831ASC)
from
$112.56
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Advanced technological design.
- Carbon ceramic sealing.
- Resistant to corrosion.
- Optimum cooling performance and longevity.
Professional Parts Sweden – Professional Parts Sweden Water Pump (Part No.G3000311383PPS)
from
$119.19
The Professional Parts Sweden Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- Resistant to corrosion.
- Optimum cooling performance and longevity.
APA/URO Parts – Expansion Tank Cap (Part No.G104062115APA)
from
$9.82
The APA/URO Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Blower Motor: With Wheel (Part No.75861)
from
$231.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – Blower Motor: With Wheel (Part No.76523)
from
$576.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Functionally Equivalent to OE Design
- Magnetic size and properties compare or exceed OEM
- Hermetically Sealed & Thermally Protected Electronics
Popular 2020 Volvo XC90 Cooling and Climate Controls Categories
2020 Volvo XC90 Cooling and Climate Controls
You count on your 2020 Volvo XC90 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 14 Cooling and Climate Controls ranging in price from $6.99 to $775.76, you’re sure to find everything you need for your 2020 Volvo XC90.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 6 different brands like Permatex, Carquest Premium, and FAE. 2020 Volvo XC90 Cooling and Climate Controls start as low as $6.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 3,208 extensive product reviews on 2020 Volvo XC90 Cooling and Climate Controls.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2020 Volvo XC90 below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 2020 Volvo XC90
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2020 Volvo XC90 running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, FAE, and even more.
Popular Permatex Cooling and Climate Controls
You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 2020 Volvo XC90 back on the road. Some of the top-rated Permatex products in these categories are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Top-Rated Cooling and Climate Controls
If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 2020 Volvo XC90, and some of our most reviewed parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
FAQs for 2020 Volvo XC90 Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 2020 Volvo XC90?
Out of 14 Cooling and Climate Controls for the 2020 Volvo XC90, the most popular in our inventory are:
from
$28.49
This product is not rated
The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge
Water Pump Gaskets
