2020 Nissan Altima Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 2020 Nissan Altimas

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1035)

Ignition Knock (Detonation) Sensor

from

$129.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MTC – MTC Knock Sensor (Part No.F602058285MTC)

MTC Knock Sensor

from

$76.61
The MTC OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Hitachi – Knock Sensor – New Actual OE Part (Part No.KNS0001)

Knock Sensor - New Actual OE Part

from

$78.99
Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivery industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters. Hitachi sensor line supports accurate measurement for reliable engine performance.

Product Features:
  • Hitachi is a Tier 1 OE supplier for knock sensors
  • 100% NEW, never remanufactured
  • Meets the OE performance and durability standards for this application
  • Accurate and reliable measurements
  • Provides accurate measurement; reliable engine performance.
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1051)

Ignition Knock (Detonation) Sensor

from

$317.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

FAE – FAE Knock Sensor (Part No.F6020426190FAE)

FAE Knock Sensor

from

$104.14
The FAE OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3673)

Ignition Knock (Detonation) Sensor

from

$56.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Delphi – Knock Sensor (Part No.AS10128)

Knock Sensor

from

$173.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Product Features:
  • Delphi knock sensors help maximize engine performance with all fuels
  • Delphi knock sensors prevent against engine damage from pre-ignition knocking
  • Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
  • Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Self-generating piezoelectric design requires no power to the sensor
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3731)

Ignition Knock (Detonation) Sensor

from

$137.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Hitachi – Hitachi Knock Sensor (Part No.F602058285HIT)

Hitachi Knock Sensor

from

$142.32
The Hitachi OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, K16PR-U11 (Part No.3130)

U-Groove Spark Plug:  OE Performance, lasts 30K+ Miles, K16PR-U11

from

$2.99
The unique U-Groove ground electrode is one of the finest features of DENSO spark plugs. The electrode was developed to meet the demand for improved ignitability, necessary for increased efficiency in emission gas purification and fuel consumption.

Product Features:
  • Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
  • Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Lasts twice as long as most conventional plugs
  • 100% pre-fired to assure reliable operation
  • U-Groove Conventional
See More

NGK – Laser Platinum Spark Plug (Part No.F100067307NGK)

Laser Platinum Spark Plug

from

$12.19
NGK Laser Platinum spark plugs provide high ignitability and longer service life. Dual platinum surfaces ensure slow wear rate providing stable idle, superior anti fouling, improved fuel efficiency and lower emissions. The platinum disc welded to backside of ground electrode provides long life, faster starts and quicker acceleration. Laser Platinum spark plugs provide high ignitability and longer service life.

Product Features:
  • Laser welded Platinum center electrode tip
  • Platinum disc welded to backside of ground electrode provides long life
  • Trivalent Metal Plating provides superior anti-corrosion and anti-seizing properties
  • Faster starts and quicker acceleration
  • Better fuel economy and lower emissions
  • Best Platinum spark plug available
  • Original Equipment Manufacturer approved design
See More

NGK – OE Series Standard Nickel Spark Plug: Conventional Tip Design, BKR5ES-11 (Part No.2382)

OE Series Standard Nickel Spark Plug: Conventional Tip Design, BKR5ES-11

from

$4.29
NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reli

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
  • RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
  • NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
See More

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP5325)

Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life

from

$6.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Works to optimize engine performance for a longer life and improved fuel economy
  • OE design
  • Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
  • Platinum ball welding process provides a consistent point of contact for enhanced adhesion
See More

DENSO – Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FXE22HR11 (Part No.3442)

Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FXE22HR11

from

$21.49
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
  • Platinum Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life (SIP)
See More

DENSO – Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FXE20HR11 (Part No.3439)

Iridium Long-Life Spark Plug: Super Ignition, OE Performance, FXE20HR11

from

$21.49
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
  • Platinum Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life (SIP)
  • Enhanced Engine Efficiency: Experience more horsepower and fewer misfires under heavy loads, along with better fuel conservation, thanks to the advanced spark plug technology.
See More

DENSO – Double Platinum Spark Plug: OE Performance, lasts 60K+ Miles, PK16PR11 (Part No.3264)

Double Platinum Spark Plug:  OE Performance, lasts 60K+ Miles, PK16PR11

from

$9.49
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • OE grade platinum on both center and ground electrodes
  • Premium shell construction with machine-rolled threads
  • Superior thermal conductivity
  • Sustained spark performance over 60,000 miles
  • Reduced secondary required voltage, increased ignition efficiency
  • Satisfied customers, reduced shop comebacks
  • Double Platinum
See More

DENSO – Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16PR-L11 (Part No.3395)

Iridium Long-Life Spark Plug:  OE Performance, last 100K+ Miles, SK16PR-L11

from

$15.49
Manufactured to the strictest OE performance, durability and emissions standards.

Product Features:
  • Latest OE technology with DENSO’s patented Iridium Alloy (90% Ir) and fine wire center electrode
  • Platinum ground electrode for extended life
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Sustained spark performance over 100,000 miles
  • Lasts up to three times as long as conventional plugs
  • Endures extreme temperatures greater than 4,000 degrees F associated with high-performance ignition and special fuel systems
  • Iridium Long Life
  • Enhanced Engine Performance: Enjoy more horsepower, faster and easier starts, and fewer misfires under heavy loads, thanks to the advanced design and materials used in the DENSO Iridium Long Life plug.
  • Fuel Efficiency: This spark plug not only boosts engine performance but also helps in better conservation of fuel, making it an economical choice for long-term use.
See More

Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RC12PYP (Part No.7071)

Double Platinum & Power Spark Plug Exceptional Perf OE Replacement RC12PYP

from

$6.99
Champion® Double Platinum Power spark plugs deliver more powerful performance with their premium design. Featuring a platinum center and ground electrode, these spark plugs offer greater wear resistance and maintain a stable operating temperature under all engine loads. The fine-wire center electrode ensures greater ignitability, while the V-trimmed ground electrode promotes sharper spark focus. The exclusive Heat-Active alloy allows the electrodes to reach optimal temperature, ensuring maximum life and performance.

Product Features:
  • Double Platinum Power – Premium Spark Plug. More Powerful Performance.
  • Platinum center and ground electrode for greater wear resistance
  • Maintains stable operating temperature under all engine loads
  • Fine-wire center electrode for greater ignitability
  • V-trimmed ground electrode promotes sharper spark focus
  • Heat-Active alloy allows electrodes to reach optimal temperature
  • OE Replacement: Designed as an OE replacement, ensuring compatibility and reliable performance for your vehicle.
See More

Delphi – Direct Ignition Coil (Part No.F3005167011DEL)

Direct Ignition Coil

from

$104.65
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:
  • Improved dwell accuracy decreases module and coil temperatures for greater reliability
  • Noise abatement material between laminations reduces audible coil noise
  • Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
  • Lower primary inductance provides high-speed performance
  • Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
  • Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
  • Direct connection to spark plugs (via small boot) eliminates spark plug wires
  • Composite iron coils provide programmable energy
  • Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
  • Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
  • Radio frequency interference (RFI)suppressor optional
See More

Hitachi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005466669HIT)

Direct Ignition Coil - (Coil on Plug)

from

$124.84
The Hitachi Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Enhances durability and increases energy transfer
  • Reduces misfires, rough timing and intermittent starting
  • High profile insulation to prevent arching
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Delphi – IGNITION COIL (Part No.GN10244)

IGNITION COIL

from

$98.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1004)

Ignition Coil: Meets OE Specifications, 1 Count

from

$69.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

DENSO – Original Equipment Quality Direct Ignition Coil (Part No.673-4023)

Original Equipment Quality Direct Ignition Coil

from

$116.99
As the innovator and leader in stick coil technology, DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:
  • First Time Fit
  • Built to DENSO Original Equipment Standards
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1003)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$77.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1412)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$84.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1019)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$75.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26A1013)

Ignition Coil: Meets OE Specifications, 1 Count

from

$76.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Accel – Coil:Cop Mazda/Niss 04-12 I4 (Part No.470549)

Coil:Cop Mazda/Niss 04-12 I4

from

$67.99
Coil:Cop Mazda/Niss 04-12 I4

Upgrade your 2020 Nissan Altima with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2020 Nissan Altima, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Altima functioning at its best. At Advance Auto Parts, we offer a wide selection of 5 Ignition and Tune-Up Products for the 2020 Nissan Altima, designed to meet your needs without breaking the bank. From Spark Plug replacements to Ignition Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2020 Nissan Altima at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $10.99 to $317.99, with an average price of $106.54. Our 5 Ignition and Tune-Up Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 2020 Nissan Altima without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Nissan Altima is always ready to roll. We’re committed to providing you with everything you need to keep your Altima in top shape, all in one place. Start shopping confidently below for your 2020 Nissan Altima!

Best-Selling Spark Plugs for 2020 Nissan Altimas

Enhance the driving experience in your Nissan with 1 quality Spark Plug components, starting at $10.99.

Autolite Iridium – Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability (Part No.AI5684)

Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability

from

$10.99
Autolite Iridium Ultra Laser Finewire Spark Plugs are one of our brand’s most technologically advanced products. These spark plugs provide superior durability, more focused ignition with better overall ignitability for optimum performance. Autolite Spark Plugs are the best alternative to OE spark plugs, offering OE fit form and function supporting all foreign and domestic makes and models at a value price. Autolite provides the automotive aftermarket and original equipment manufacturers with the highest quality ignition products and is the leading supplier of spark plugs in the world.

Product Features:
  • Autolite Iridium Ultra is an engineered OE replacement iridium spark plug.
  • A laser-welded 0.5mm pure iridium finewire center electrode provides optimal fuel efficiency, acceleration and focused ignitability.
  • Nickel-plated shell to resist corrosion.
  • High-alumina ceramic insulator for increased strength.
  • Laser welded 0.5mm Iridium finewire center electrode.
  • Proprietary platinum sidewire technology.
See More

Most Popular 2020 Nissan Altima Ignition Sensors

Customize your Nissan with 1 Ignition Sensors products like Knock Sensors, all priced under $317.99.

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.EKA1051)

Ignition Knock (Detonation) Sensor

from

$317.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top Picks for 2020 Nissan Altima Ignition Coils and Boots

Upgrade Nissan Altimas with top-quality Ignition Coils and Boots parts, including 3 OEM and aftermarket selections for your 2020 model.

Worldpac – IGNITION COIL (Part No.F30003547168DEL)

IGNITION COIL

from

$174.42
IGNITION COIL

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1930)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$89.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Hitachi – Ignition Coil Actual OE Part New (Part No.IGC0099)

Ignition Coil Actual OE Part New

from

$71.99
Hitachi’s Ignition Coils (IGCs) provide the needed energy for today’s high efficiency, high power vehicles. High quality materials ensure that even under the most extreme conditions, Hitachi’s IGCs will not deform or malfunction. Our ignition coils help to produce optimal engine efficiency resulting in reliable performance and gas mileage. Electronic connection points are welded to providing durability during heat cycles. Details such as materials, high turns ratios, and protected circuitry provide a durable and reliable product approved by OE manufacturers. Designed to meet the exact needs of each specific vehicle, Hitachi’s ignition coils are the premium choice.

Product Features:
  • Benefits of these quality Ignition Coils include efficient spark and reduced need for wires, long product life, and consistent voltage and amperage output.
See More

FAQs for 2020 Nissan Altima Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2020 Nissan Altimas?

Out of 5 Ignition and Tune-Up Products that fit 2020 Nissan Altimas, the following parts are the top sellers:

What’s the price range for 2020 Nissan Altima Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2020 Nissan Altima start at $10.99 and go up to $317.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2020 Nissan Altima?

The average price for Ignition and Tune-Up Products for the 2020 Nissan Altima is $106.54. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Nissan Altima model years?

Yes, we currently carry Ignition and Tune-Up Products for 32 model years of Nissan Altimas between 1993 and 2025. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2021, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Ignition and Tune-Up Products for my 2020 Nissan Altima?

The cheapest 2020 Nissan Altima Ignition and Tune-Up Products we carry in stock are:

What types of Ignition and Tune-Up Products do you sell for my 2020 Nissan Altima?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2020 Nissan Altima:

Can I get help with 2020 Nissan Altima Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Ignition and Tune-Up Products and more.

What is your return policy for Nissan Altima Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Nissan Altima Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.