2020 Mercedes-Benz Sprinter 3500 Engine Parts

Essential Engine Parts for 2020 Mercedes-Benz Sprinter 3500s

Bosch – Camshaft Position Sensor (Part No.0232103107)

Camshaft Position Sensor

from

$86.99
Bosch OE quality camshaft sensors for highly accurate measuerment, fuel consumption reduction and lower emissions.

Product Features:
  • Robust design with Twist insensitive mounting (TIM)
  • Reliable digital measurement and wide temperature range
  • High accuracy and long service life
See More

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA4014)

Engine Camshaft Position Sensor

from

$40.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Engineered with technology that provides increased accuracy with a stronger, more consistent signal
  • Sensors are based on proven hall effect and variable reluctance technology
  • Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
  • O-rings and seals are included if required.
  • Weather-tight connectors prevent leaks and corrosion for better reliability.
  • Extensive design validation testing and 100% end-of-line tested.
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Rein – Oil Pan Kit (Part No.ESK0184)

Oil Pan Kit

from

$183.99
Rein Automotive OE quality oil pan kits are made with premium materials and designed and manufactured to be direct-fit replacements. Rein oil pans are designed to tight tolerances to ensure proper sealing. Kits include OE quality gaskets or Ajusil silicone sealant where the OE pans do not use a gasket. Kits include new drain plugs.

Product Features:
  • Includes OE quality gaskets or Ajusil silicone sealant
  • Includes new drain plugs
  • Designed to tight tolerances to ensure proper sealing
See More

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9838)

Engine Mount: Front Left, Front Right, 1 Piece

from

$81.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 07-09; FRHT 07-18; MERCEDES 10-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2021
  • Weight approx: 4 Lbs
See More

Rotomaster – Remanufactured Turbocharger (Part No.A8200103R)

Remanufactured Turbocharger

from

$1001.00
Product Features:
  • All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
  • Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
  • All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
  • 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
  • Each unit comes with a pre-lube syringe to ensure product protection during installation.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Meets or exceeds O.E. performance.
  • Comes with a pre-lube syringe to ensure product protection during installation.
See More

Cardone – Turbocharger (Part No.2T-324)

Turbocharger

from

$1458.99
CARDONE remanufactured Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every CARDONE turbocharger has been designed and tested to guarantee O.E. fit and performance. CARDONE is committed to getting your vehicle back on the road and back to peak performance with these remanufactured, direct-replacement turbochargers.

Product Features:
  • All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
  • Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
  • All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
  • 100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
  • Each unit comes with a pre-lube syringe to ensure product protection during installation.
  • 100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
  • All units come with the required gaskets and mounting hardware for easy installation.
  • Meets or exceeds O.E. performance.
  • Comes with a pre-lube syringe to ensure product protection during installation.
See More

National – Multi-Purpose Seal (Part No.710608)

Multi-Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; single-lip
  • Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
  • Resistance to EP lubricants
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

MAHLE Original – Engine Timing Cover Seal (Part No.67769)

Engine Timing Cover Seal

from

$10.29
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Engine Crankshaft Seal (Part No.81-26248-10)

Engine Crankshaft Seal

from

$10.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

National – Multi-Purpose Seal (Part No.710289)

Multi-Purpose Seal

from

$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
  • Excellent high temperature capabilities
  • Compatible with wide range of fluids
  • Delivers quality and reliable performance for every type of repair
See More

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-05)

Engine Valve Stem Oil Seal Set

from

$37.49
Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
  • Able to be used in applications with minimal lubrication.
  • Thermal properties with a wide range of operating temperatures.
See More

Rein – Oil Cooler Repl. Kit (Part No.ECK0026)

Oil Cooler Repl. Kit

from

$501.99
Rein Automotive OE Quality Problem Solver Engine Oil Cooler Replacement Kit covers all Mercedes OM642 engines, which suffer from oil leaks as described in Mercedes Service Bulletin LI18.30-P-055434. This kit includes a Nissens Denmark oil cooler, all seals, gaskets and stretch bolts needed to fix oil leaks inside the V of the engine. The leaks may have lead to “Check Oil Level” or “Oil Level Low” messages on the vehicle instrument cluster, decreased oil level measurements, oil puddles or stains underneath the vehicle. The OE, as well as our Rein solution, uses upgraded Vitom oil cooler seals to combat this issue when a leaking oil cooler makes a complete upgrade the sustainable solution.

Product Features:
  • Kit contains all the needed parts (including Nissen oil cooler) ensuring the oil leak repair can be performed successfully
  • Eliminates the possibility of an incomplete job and tying-up a lift due to missing parts
  • Updated viton seals and hardware are included to enable technicians to perform a high quality repair
  • Kit contains two model specific exhaust manifold to turbo charger gaskets
See More

Felpro – Turbocharger Oil Line Gasket (Part No.73709)

Turbocharger Oil Line Gasket

from

$3.99
Turbocharger Oil Line Gasket

Gates – Molded Turbocharger Hose (Part No.26270)

Molded Turbocharger Hose

from

$228.99
Product Features:
  • Used for hot side and cold side charge air coolers
  • Specially formulated fluoroelastomer tube liner resists oil
  • Absorbs and isolates vibrations and shocks
  • Meets or exceeds OE standards in fit, form and function
See More

Rein – Turbo Intercooler Hose (Part No.TCH0330)

Turbo Intercooler Hose

from

$224.99
Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants
See More

Rein – Turbo Intercooler Hose (Part No.TCH0331)

Turbo Intercooler Hose

from

$128.99
Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants
See More

Rein – Turbo Intercooler Hose (Part No.TCH0320)

Turbo Intercooler Hose

from

$101.99
Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Turbo Intercooler Hose (Part No.TCH0301)

Turbo Intercooler Hose

from

$64.99
Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants
See More

Rein – Turbo Intercooler Hose (Part No.TCH0300)

Turbo Intercooler Hose

from

$123.99
Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants
See More

Rein – Turbo Intercooler Hose (Part No.TCH0332)

Turbo Intercooler Hose

from

$224.99
Rein Automotive OE quality turbo cooling hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1192)

Engine Variable Valve Timing (VVT) Solenoid

from

$54.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:
  • Precision-wound coated copper windings increase product durability and life cycle.
  • Hard-coated and anodized spool valve to prevent corrosion and increase service life.
  • Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
  • Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure product reliability, every time.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Upgrade your 2020 Mercedes-Benz Sprinter 3500 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2020 Mercedes-Benz Sprinter 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Engine Parts are key to keeping your Sprinter 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Engine Parts for the 2020 Mercedes-Benz Sprinter 3500, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Engine Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2020 Mercedes-Benz Sprinter 3500 at great prices. Our Engine Parts inventory for this model ranges from just $3.99 to $1,266.00, with an average price of $234.63. Our 16 Engine Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2020 Mercedes-Benz Sprinter 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Mercedes-Benz Sprinter 3500, we stock popular OEM and aftermarket Engine Parts from top names like Mahle, and more. Mahle Engine Parts start at just $10.29 and boast an impressive 4.4 stars average rating from customers. With 1 customer reviews and counting, our 2020 Mercedes-Benz Sprinter 3500 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Oil and Lubricants, Fluids and Chemicals and more to make sure your 2020 Mercedes-Benz Sprinter 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sprinter 3500 in top shape, all in one place. Start shopping confidently below for your 2020 Mercedes-Benz Sprinter 3500!

Best-Selling Engine Timing Parts for 2020 Mercedes-Benz Sprinter 3500s

Enhance the driving experience in your Mercedes-Benz with 2 quality Engine Timing Part components, starting at $10.29.

MAHLE Original – Engine Timing Cover Seal (Part No.67769)

Engine Timing Cover Seal

from

$10.29
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1192)

Engine Variable Valve Timing (VVT) Solenoid

from

$54.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:
  • Precision-wound coated copper windings increase product durability and life cycle.
  • Hard-coated and anodized spool valve to prevent corrosion and increase service life.
  • Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
  • Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure product reliability, every time.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Most Popular 2020 Mercedes-Benz Sprinter 3500 Engine Mounts

Customize your Mercedes-Benz with 1 Engine Mounts products like Engine Mounts, all priced under $81.99.

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9838)

Engine Mount: Front Left, Front Right, 1 Piece

from

$81.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to DODGE 07-09; FRHT 07-18; MERCEDES 10-21;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2007-2021
  • Weight approx: 4 Lbs
See More

Top Picks for 2020 Mercedes-Benz Sprinter 3500 Engine Gaskets and Seals

Upgrade Mercedes-Benz Sprinter 3500s with top-quality Engine Gaskets and Seals parts, including 1 OEM and aftermarket selections for your 2020 model.

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-05)

Engine Valve Stem Oil Seal Set

from

$37.49
Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
  • Able to be used in applications with minimal lubrication.
  • Thermal properties with a wide range of operating temperatures.
See More

In-Demand Camshafts for 2020 Mercedes-Benz Sprinter 3500s

Select from 2 premium Camshafts parts for your 2020 Mercedes-Benz Sprinter 3500, with prices ranging from $85.99 to $86.99.

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1491)

Engine Camshaft Position Sensor

from

$85.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Engineered with technology that provides increased accuracy with a stronger, more consistent signal
  • Sensors are based on proven hall effect and variable reluctance technology
  • Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
  • O-rings and seals are included if required.
  • Weather-tight connectors prevent leaks and corrosion for better reliability.
  • Extensive design validation testing and 100% end-of-line tested.
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Bosch – Camshaft Position Sensor (Part No.0232103107)

Camshaft Position Sensor

from

$86.99
Bosch OE quality camshaft sensors for highly accurate measuerment, fuel consumption reduction and lower emissions.

Product Features:
  • Robust design with Twist insensitive mounting (TIM)
  • Reliable digital measurement and wide temperature range
  • High accuracy and long service life
See More

Most Sold 2020 Mercedes-Benz Sprinter 3500 Engine Internals

Explore our best-selling Mercedes-Benz parts for the 2020 Sprinter 3500 among 3 OEM and aftermarket options starting from $10.99.

Victor Reinz – Engine Crankshaft Seal Kit (Part No.19-10243-01)

Engine Crankshaft Seal Kit

from

$46.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – Engine Crankshaft Seal Kit (Part No.TCS 46204)

Engine Crankshaft Seal Kit

from

$28.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Victor Reinz – Engine Crankshaft Seal (Part No.81-26248-10)

Engine Crankshaft Seal

from

$10.99
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Top-Rated Engine Parts Brands For Your 2020 Mercedes-Benz Sprinter 3500

Shop for the best-rated brands offering Engine Parts and other products for your 2020 Mercedes-Benz Sprinter 3500s. Below you’ll find some of our best rated Engine Parts from Mahle, and more. Engine Parts from these brands that fit a 2020 Sprinter 3500 start at just $10.29 and are rated as high as 4.4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Mahle 2020 Mercedes-Benz Sprinter 3500 Engine Parts

When it comes to maintaining or upgrading your 2020 Mercedes-Benz Sprinter 3500, using quality Engine Parts is essential to ensure durability and a perfect fit. Mahle ticks all of those boxes. We offer a wide selection of Mahle Engine Parts, specifically designed for the 2020 Mercedes-Benz Sprinter 3500. With over 1 Mahle brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.29. Plus, with over 1 customer reviews and an average rating of 4.4 stars, you can trust that our Mahle Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Engine Timing Cover Seal
from $10.29
(1)
Engine Timing Cover Seal
“fits perfect”

FAQs for 2020 Mercedes-Benz Sprinter 3500 Engine Parts

Which Engine Parts are best-sellers for 2020 Mercedes-Benz Sprinter 3500s?

Out of 16 Engine Parts that fit 2020 Mercedes-Benz Sprinter 3500s, the following parts are the top sellers:

What’s the price range for 2020 Mercedes-Benz Sprinter 3500 Engine Parts?

Engine Part prices for the 2020 Mercedes-Benz Sprinter 3500 start at $3.99 and go up to $1,266.00 for the most premium parts.

What’s the average price of a Engine Part for a 2020 Mercedes-Benz Sprinter 3500?

The average price for Engine Parts for the 2020 Mercedes-Benz Sprinter 3500 is $234.63. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Mercedes-Benz Sprinter 3500 model years?

Yes, we currently carry Engine Parts for 13 model years of Mercedes-Benz Sprinter 3500s between 2010 and 2024. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2019, 2018, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Engine Parts for my 2020 Mercedes-Benz Sprinter 3500?

The cheapest 2020 Mercedes-Benz Sprinter 3500 Engine Parts we carry in stock are:

What types of Engine Parts do you sell for my 2020 Mercedes-Benz Sprinter 3500?

Can I get help with 2020 Mercedes-Benz Sprinter 3500 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Engine Parts and more.

What is your return policy for Mercedes-Benz Sprinter 3500 Engine Parts?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz Sprinter 3500 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.