2020 Mercedes-Benz Metris Fuel and Emissions Systems
Find Your Specific 2020 Mercedes-Benz Metris Fuel and Emissions Systems
Below you will find various in-demand Mercedes-Benz Fuel and Emissions Systems, components and accessories for your 2020 Metris. Advance Auto Parts has popular Metris parts like Vapor Canister Purge Valves, Air Flow Sensors, Canister Purge Valves and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Metris model years including
2016,
2017,
2018,
2019,
2021,
2022,
2023 and more. Select a category of 2020 Mercedes-Benz Metris Fuel and Emissions Systems below and start saving instantly.
Popular 2020 Mercedes-Benz Metris Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2020 Mercedes-Benz Metris
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1507)
from
$65.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 16.61" Long, Heated, Exact Fit (Part No.234-5085)
from
$199.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Vapor Canister Vent Valve (Part No.CPC1512)
from
$256.99
Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.
Product Features:
See More
Product Features:
- Provides closure for the EVAP system (normally vented) during OBD II test cycle
- Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
- Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
- Meets or exceeds all OEM specifications
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA2495)
from
$71.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1648)
from
$48.99
Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.
Product Features:
See More
Product Features:
- Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
- Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
- Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
- Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
- Meets or exceeds all OEM specifications
ACDelco – Multi-Purpose Pigtail (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Upgrade your 2020 Mercedes-Benz Metris with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2020 Mercedes-Benz Metris, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Metris functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Fuel and Emissions Systems for the 2020 Mercedes-Benz Metris, designed to meet your needs without breaking the bank.
From
Vapor Canister Purge Valve
replacements to
Air Flow Sensors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2020 Mercedes-Benz Metris at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $12.49 to $256.99, with
an average price of $96.18.
Our 7 Fuel and Emissions Systems in stock come from 4 trusted brands, so you’re sure to find the right part for your 2020 Mercedes-Benz Metris without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 Mercedes-Benz Metris is always ready to roll. We’re committed to providing you with everything you need to keep your Metris in top shape, all in one place.
Start shopping confidently below for your 2020 Mercedes-Benz Metris!
Best-Selling Vapor Canister Purge Valves for 2020 Mercedes-Benz Metris
Enhance the driving experience in your Mercedes-Benz with 1 quality Vapor Canister Purge Valve components, starting at $256.99.
Carquest Premium – Vapor Canister Vent Valve (Part No.CPC1512)
from
$256.99
Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.
Product Features:
See More
Product Features:
- Provides closure for the EVAP system (normally vented) during OBD II test cycle
- Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
- Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
- Meets or exceeds all OEM specifications
Most Popular 2020 Mercedes-Benz Metris Air Flow Sensors
Customize your Mercedes-Benz with 4 Air Flow Sensors products
like Air- Fuel Ratio Sensors,
MAP-Barometric Pressures, and
Manifold Air Pressure Sensors, all
priced under $199.99.
ACDelco – Multi-Purpose Pigtail (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, andor engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 16.61" Long, Heated, Exact Fit (Part No.234-5085)
from
$199.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement¿ and a first time fit.; DENSO gives you the right part and the right fit¿ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA2495)
from
$71.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1507)
from
$65.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Top Picks for 2020 Mercedes-Benz Metris Canister Purge Valves
Upgrade Mercedes-Benz Metris with top-quality Canister Purge Valves parts, including 1 OEM and aftermarket selections for your 2020 model.
Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1648)
from
$48.99
Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.
Product Features:
See More
Product Features:
- Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
- Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
- Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
- Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
- Meets or exceeds all OEM specifications
In-Demand Fuel Tanks for 2020 Mercedes-Benz Metris
Select from 1 premium Fuel Tanks parts for your 2020 Mercedes-Benz Metris.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
FAQs for 2020 Mercedes-Benz Metris Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2020 Mercedes-Benz Metris?
Out of 7 Fuel and Emissions Systems that fit 2020 Mercedes-Benz Metris, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Multi-Purpose Pigtail (11935200) – $16.79
- Manifold Absolute Pressure Sensor (MAP) (12450794) – $65.99
What’s the price range for 2020 Mercedes-Benz Metris Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2020 Mercedes-Benz Metris start at $12.49 and go up to $256.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2020 Mercedes-Benz Metris?
The average price for Fuel and Emissions Systems for the 2020 Mercedes-Benz Metris is $96.18. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Mercedes-Benz Metris model years?
What are the cheapest Fuel and Emissions Systems for my 2020 Mercedes-Benz Metris?
The cheapest 2020 Mercedes-Benz Metris Fuel and Emissions Systems we carry in stock are:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Multi-Purpose Pigtail (11935200) – $16.79
- Vapor Canister Purge Solenoid: Includes Mounting Hardware (12455802) – $48.99
- Manifold Absolute Pressure Sensor (MAP) (12450794) – $65.99
- Manifold Absolute Pressure Sensor (MAP) (12450378) – $71.99
What types of Fuel and Emissions Systems do you sell for my 2020 Mercedes-Benz Metris?
As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2020 Mercedes-Benz Metris:
Can I get help with 2020 Mercedes-Benz Metris Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Fuel and Emissions Systems and more.
What is your return policy for Mercedes-Benz Metris Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Mercedes-Benz Metris Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
