2020 Infiniti QX80 Belts and Hoses

Essential Belts and Hoses for 2020 Infiniti QX80s

Bando – Multi Rib (Serpentine) Belt (Part No.W1000451138BAN)

Multi Rib (Serpentine) Belt

from

$46.97
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Dayco – Poly Rib Belt Serpentine Belt; 96.14 Long, 7 Rib Count (Part No.5070961)

Poly Rib Belt Serpentine Belt; 96.14 Long, 7 Rib Count

from

$73.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Litens – Idler Pulley: Direct Fit, Steel, 72mm Diameter (Part No.900371A)

Idler Pulley: Direct Fit, Steel, 72mm Diameter

from

$65.99
This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Canada to the O.E. specified design and meets all performance and durability requirements. This Heavy duty Steel pulley is specifically designed for Nissan truck and SUV applications. A new 12mm I.D. reduction bearing included. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included.
See More

Dayco – Dayco, Acc. Belt Idler Pulley, Pulley Only (Part No.G6020314392DAY)

Dayco, Acc. Belt Idler Pulley, Pulley Only

from

$65.48
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999571A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$379.99
This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This part corresponds to the 2011-2015 Nissan NV/Infiniti QX56,QX80 with 5.6L. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This higher damping consequently reduces arm motion and wear as well as an optimized install feature for ease on tensioner replacement. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included
See More

Upgrade your 2020 Infiniti QX80 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2020 Infiniti QX80, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Infiniti or enhancing its overall performance, Belts and Hoses are key to keeping your QX80 functioning at its best. At Advance Auto Parts, we offer a wide selection of 4 Belts and Hoses for the 2020 Infiniti QX80, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Pulleys upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2020 Infiniti QX80 at great prices. Our Belts and Hoses inventory for this model ranges from just $46.97 to $379.99, with an average price of $141.61. Our 4 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 2020 Infiniti QX80 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Infiniti QX80 is always ready to roll. We’re committed to providing you with everything you need to keep your QX80 in top shape, all in one place. Start shopping confidently below for your 2020 Infiniti QX80!

Best-Selling Serpentine and V Belts for 2020 Infiniti QX80s

Enhance the driving experience in your Infiniti with 2 quality Serpentine and V Belt components, starting at $46.97.

Dayco – Poly Rib Belt Serpentine Belt; 96.14 Long, 7 Rib Count (Part No.5070961)

Poly Rib Belt Serpentine Belt; 96.14 Long, 7 Rib Count

from

$73.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Bando – Multi Rib (Serpentine) Belt (Part No.W1000451138BAN)

Multi Rib (Serpentine) Belt

from

$46.97
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Most Popular 2020 Infiniti QX80 Pulleys

Customize your Infiniti with 1 Pulleys products like Idler Pulleys, all priced under $65.48.

Dayco – Dayco, Acc. Belt Idler Pulley, Pulley Only (Part No.G6020314392DAY)

Dayco, Acc. Belt Idler Pulley, Pulley Only

from

$65.48
The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Precision bearing
  • OE High quality pulley assembly
  • Durable long life performance.
See More

Top Picks for 2020 Infiniti QX80 Belt Tensioners

Upgrade Infiniti QX80s with top-quality Belt Tensioners parts, including 1 OEM and aftermarket selections for your 2020 model.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999571A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$379.99
This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This part corresponds to the 2011-2015 Nissan NV/Infiniti QX56,QX80 with 5.6L. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This higher damping consequently reduces arm motion and wear as well as an optimized install feature for ease on tensioner replacement. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
  • Installation instructions included
See More

FAQs for 2020 Infiniti QX80 Belts and Hoses

Which Belts and Hoses are best-sellers for 2020 Infiniti QX80s?

Out of 4 Belts and Hoses that fit 2020 Infiniti QX80s, the following parts are the top sellers:

What’s the price range for 2020 Infiniti QX80 Belts and Hoses?

Belts and Hose prices for the 2020 Infiniti QX80 start at $46.97 and go up to $379.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2020 Infiniti QX80?

The average price for Belts and Hoses for the 2020 Infiniti QX80 is $141.61. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Infiniti QX80 model years?

Yes, we currently carry Belts and Hoses for 6 model years of Infiniti QX80s between 2014 and 2019. Belts and Hoses are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 2020 Infiniti QX80?

The cheapest 2020 Infiniti QX80 Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 2020 Infiniti QX80?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2020 Infiniti QX80:

Can I get help with 2020 Infiniti QX80 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Infiniti Belts and Hoses and more.

What is your return policy for Infiniti QX80 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Infiniti QX80 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.