2020 GMC Sierra 2500 HD Performance and Racing Products
Find Your Specific 2020 GMC Sierra 2500 HD Performance and Racing Products
Below you will find various in-demand GMC Performance and Racing Products, components and accessories for your 2020 Sierra 2500 HD. Advance Auto Parts has popular Sierra 2500 HD parts like Nitrous and CO2 Systems Performance Air Intake Kits and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Sierra 2500 HD model years including
2014,
2015,
2016,
2017,
2018,
2019,
2021,
2022,
2023 and more. Select a category of 2020 GMC Sierra 2500 HD Performance and Racing Products below and start saving instantly.
Popular 2020 GMC Sierra 2500 HD Performance and Racing Products Categories
Essential Performance and Racing Products for 2020 GMC Sierra 2500 HDs
K&N – Cold Air Intake: Adds Up To 20 Horsepower, With Washable Air Filter (Part No.57-3047)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 20 Horsepower, With Washable Air Filter (Part No.77-3087KP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.77-3090KTK)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
aFe POWER – Momentum HD Cold Air Intake: Gain up to 21 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-74003)
from
$435.99
Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing to the massive Pro DRY S air filter and premium hardware, we spared no expense to give you the best intake on the market.
Product Features:
See More
Product Features:
- Pro DRY S Filter Media
- 360 deg. Radial Flow Air Filter
- 3 Layer Progressive Synthetic Media
- Washable And Reusable
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9004)
from
$217.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.77-3076KTK)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 24 Horsepower, With Washable Air Filter (Part No.63-3087)
from
$419.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Washable Air Filter (Part No.77-3086KTK)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – NextGen Cold Air Intake: Adds Up To 20.5 Horsepower, With Washable Air Filter (Part No.50-3103)
from
$425.99
This K&N NextGen cold air intake system is engineered for Chevrolet Silverado 2500/3500 HD V8 6.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 83.2% to your engine and provides an increase of 20.56 horsepower and 28.1 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
aFe POWER – QUANTUM Cold Air Intake: Gain up to 8 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.53-10007R)
from
$365.99
Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.
Product Features:
See More
Product Features:
- Outflows Factory Intake
- Unique Filter To Housing Interface For Easy Installation
- CAD Designed XLPE Roto-Molded Intake Tube For Optimum Airflow
- Intake Tube Heat Soak Resistant and Durable
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (Part No.77-3031KP)
from
$419.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9904)
from
$211.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9900B)
from
$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a blue Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9058)
from
$216.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
NOS/Nitrous Oxide Systems – LS2 Plate; Nitrous System (Part No.05169NOS)
from
$1500.99
The NOS LS2 plate system uses a billet plate with no spray bars. This unique design allows better atomization which prevents fuel puddles in your manifold and provides the best cylinder to cylinder distribution for maximum power. This is no ordinary low HP kit. The plate and Solenoids supplied will easily support 200HP.
Product Features:
See More
Product Features:
- Adjustable Up to 250 HP
- Includes Required Hardware For Most Applications
- On Demand Power
- Does Not Affect Daily Driving Characteristics
- Best Horsepower Per Dollar Modification Available
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1076.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
Upgrade your 2020 GMC Sierra 2500 HD with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2020 GMC Sierra 2500 HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Performance and Racing Products are key to keeping your Sierra 2500 HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Performance and Racing Products for the 2020 GMC Sierra 2500 HD, designed to meet your needs without breaking the bank.
From
Nitrous and CO2 System
replacements to
Performance Air Intake Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2020 GMC Sierra 2500 HD at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $425.99 to $1,076.99, with
an average price of $650.99.
Our 3 Performance and Racing Products in stock come from 2 trusted brands, so you’re sure to find the right part for your 2020 GMC Sierra 2500 HD without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 GMC Sierra 2500 HD is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 2500 HD in top shape, all in one place.
Start shopping confidently below for your 2020 GMC Sierra 2500 HD!
Best-Selling Nitrous and CO2 Systems for 2020 GMC Sierra 2500 HDs
Enhance the driving experience in your GMC with 1 quality Nitrous and CO2 System components, starting at $1,076.99.
NOS/Nitrous Oxide Systems – Diesel; Nitrous System (Part No.02519NOS)
from
$1076.99
If you think the torque of that monster diesel is something to brag about then you should feel it with the extra power of NOS. This kit works with stock and modified applications. Vehicles with computer upgrades will benefit even more as nitrous will aid in a clean combustion. Comes complete with 10 pound bottle, bottle brackets, nitrous feed line, large nitrous solenoid, electrical wiring and complete instructions.
Product Features:
See More
Product Features:
- Provides Additional Air Your Diesel Wants
- Additional 50 HP
- w/No Fuel System Or Electronic Upgrades
- Complete Kit For Easy Installation
Most Popular 2020 GMC Sierra 2500 HD Performance Air Intake Kits
Customize your GMC with 2 Performance Air Intake Kits products
like Engine Cold Air Intakes, all
priced under $449.99.
K&N – NextGen Cold Air Intake: Adds Up To 24 Horsepower, With Washable Air Filter (Part No.50-3119D)
from
$449.99
K&N NextGen Diesel Dryflow cold air intake systems feature a high-density polyethylene (HDPE) rotationally molded tube designed to help increase the volume of airflow to your engine and provide an increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable Dryflow LIFETIME Air Filter featuring an oil-free synthetic media. The oversized, conical design allows you to go up to 50,000 miles between filter services under normal highway driving conditions and has an easy oil-free two step cleaning process for convenience. A custom designed NextGen air box helps protect air intake from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience enhanced induction and turbo clarity without unwanted drone during cruising speeds.
- Improved Towing Power: Engineered to deliver more torque for hauling, towing, and heavy-load performance.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against harsh diesel environments.
- Oversized Dryflow« Filter: Features a radius-entry inlet to increase airflow and performance. NextGen filters also feature Quick-Lock technology for fast, secure installation with minimal hardware sealing in place with just one hose clamp.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting air speed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen Dryflow« diesel intake is precisely engineered for your vehicle, enhancing the style of your engine bay while providing exceptional filtration without sacrificing performance.
- Sinister Aesthetic: The all-black design delivers a sleek, stealthy presence with an aggressive black-on-black finish that complements any build and looks just as powerful as it performs.
- Engineered for Convenience: NextGen Dryflow« synthetic media delivers up to 99% filtration efficiency and features an easy, two-step cleaning process that requires no oil, making maintenance more convenient.
- Proven Legacy: Backed by over 50 years of trusted filtration performance, K&N NextGen intakes deliver superior protection and extended service intervals. Proudly engineered and made in the USA, each system is supported by a Limited Warranty.
K&N – NextGen Cold Air Intake: Adds Up To 20.5 Horsepower, With Washable Air Filter (Part No.50-3103)
from
$425.99
This K&N NextGen cold air intake system is engineered for Chevrolet Silverado 2500/3500 HD V8 6.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 83.2% to your engine and provides an increase of 20.56 horsepower and 28.1 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
FAQs for 2020 GMC Sierra 2500 HD Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2020 GMC Sierra 2500 HDs?
Out of 3 Performance and Racing Products that fit 2020 GMC Sierra 2500 HDs, the following parts are the top sellers:
- NextGen Cold Air Intake: Adds Up To 24 Horsepower, With Washable Air Filter (50339135) – $449.99
- Diesel; Nitrous System (22310962) – $1,076.99
- NextGen Cold Air Intake: Adds Up To 20.5 Horsepower, With Washable Air Filter (50284660) – $425.99
What’s the price range for 2020 GMC Sierra 2500 HD Performance and Racing Products?
Performance and Racing Product prices for the 2020 GMC Sierra 2500 HD start at $425.99 and go up to $1,076.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2020 GMC Sierra 2500 HD?
The average price for Performance and Racing Products for the 2020 GMC Sierra 2500 HD is $650.99. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other GMC Sierra 2500 HD model years?
What are the cheapest Performance and Racing Products for my 2020 GMC Sierra 2500 HD?
The cheapest 2020 GMC Sierra 2500 HD Performance and Racing Products we carry in stock are:
- NextGen Cold Air Intake: Adds Up To 20.5 Horsepower, With Washable Air Filter (50284660) – $425.99
- NextGen Cold Air Intake: Adds Up To 24 Horsepower, With Washable Air Filter (50339135) – $449.99
- Diesel; Nitrous System (22310962) – $1,076.99
What types of Performance and Racing Products do you sell for my 2020 GMC Sierra 2500 HD?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2020 GMC Sierra 2500 HD:
Can I get help with 2020 GMC Sierra 2500 HD Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Performance and Racing Products and more.
What is your return policy for GMC Sierra 2500 HD Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new GMC Sierra 2500 HD Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
