2020 Chevrolet Silverado 1500 Air Suspension and Kits

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

• MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
• EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
• EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
• BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
• CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Air Fitting: Resists air leakage.

Ideal for hauling, Monroe Max-Air shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

• MAINTAIN RIDE HEIGHT UNDER LOAD – Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission; see owner’s manual)
• EASY TO ADJUST – Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor; pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
• EXCEPTIONAL HANDLING – Full-displaced valving on compression and extension cycles for a smooth ride
• BUILT TO LAST – Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
• CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Air Fitting: Resists air leakage.

Looking to add larger tires or add that go anywhere capability and feel? Then look no further than a TrailFX mid lift suspension kit. Increased ground clearance, visibility, and a smoother ride are all benefits of a mid lift suspension kit. Kits contain all required, ready to install components in one box under one part number.

Product Features:

• Designed For Additional Clearance For Larger Wheel And Tire Combinations
• All Necessary Components Included In One Box
• Maintains Factory Ride
• Shock Replacement Not Required
• X Guard Plus Powertrain Warranty
• Limited Lifetime Warranty and Limited 1 Year Warranty On Wearable Components

ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.

Product Features:

• Made From Cast Iron/Not Light Weight Extrusions
• Built In Locator Pin/Not Pressed In
• Puts Rake Back In Your Truck For Towing/Hauling
• Installation Time Is About An Hour

LoadLifter 5000 kits are Air Lifts heaviest-rated air spring kits, specifically engineered for hauling or towing heavy loads. LoadLifter 5000 air springs are designed to fit popular vehicles like 3/4 ton and one-ton pickup trucks, motor homes, commercial trucks and other severe uses. LoadLifter 5000 air springs provide up to 5,000 pounds of leveling capacity for support of your heaviest loads.

Product Features:

• Specifically Engineered For Hauling Or Towing Heavy Loads
• Designed To Fit Popular Vehicles Like 3/4 Ton And One-Ton Pickup Trucks, Motor Homes, Commercial Trucks And Other Severe Uses
• Eliminates Squat, Trailer Sway, Rough Ride And Bottoming Out
• Refer To The Document Tab For The New Authorized Installer Program

Product Features:

• COMPATIBILITY: Designed for Chevrolet Silverado 1500 (excludes Trail Boss) and GMC Sierra 1500 trucks (excludes AT4); use of automatic 4 Hi feature not recommended after installation
• LIFTS AND LEVELS VEHICLE: Designed to fit up to 33-in. tires, system lifts front by 3-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 33-in. tires; bumpers, winches, etc. affect height)
• COMPLETE SOLUTION: Includes Rancho RS9000XL struts and rear shocks, upper control arms with ball joints, rear block kit, sway bar spacers and mounting hardware
• NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• ORDERING INFO: Ships in three boxes; order RS66311R9-1, RS66311R9-2 and RS66311R9-3 for a complete kit
• BUILT TO PERFORM: Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature durable OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• NOTES: Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires; must use OE springs and top mounting components (tire size varies between manufacturers)
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

• 6 Leveling Kit Merchandiser Packages To Choose From, With The Hottest Moving Applications
• Levels Out Factory Rake Not Affecting Your Ride Quality
• Allows For The Use Of Larger Wheel And Tire Combinations
• Easy To Install, Spacers Mount On Top Of The Strut, No Strut Compressor Required

At Suncore Industries, we will endeavor to provide High Quality & Reliability Air Suspension Products. Everything we do will encompass successfully addressing the need for exceptional Customer Satisfaction and Product Quality & Reliability. We understand how frustrating it can be to have a part not perform to expectations. We are mechanics and car owners too. Our mission is to provide you with the level of quality you deserve.

Product Features:

• Tested And Inspected
• 1 Year Warranty

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

SUSP KIT

SUSP KIT

Product Features:

• ORDERING INFO: Box 3 of 3 for master kit RS66311R9; must order RS66311R9-1, RS66311R9-2 and RS66311R9-3 for a complete kit
• COMPATIBILITY: Designed for Chevrolet Silverado 1500 (excludes Trail Boss) and GMC Sierra 1500 trucks (excludes AT4)
• LIFTS AND LEVELS VEHICLE: Fits up to 33-in. tires, system lifts front by 3-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 33-in. tires; bumpers, winches, etc. affect height)
• COMPLETE SOLUTION: Includes Rancho RS9000XL struts and rear shocks, upper control arms with ball joints, rear block kit, sway bar spacers and mounting hardware
• NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• BUILT TO PERFORM: Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature durable OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• NOTES: Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires; must use OE springs and top mounting components (tire size varies between manufacturers)
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

Product Features:

• COMPATIBILITY: Designed for Chevy Silverado 1500 and GMC Sierra 1500 trucks
• LEVELED STANCE: Reduces factory rake and levels out truck’s stance by 2-in. (aftermarket bumpers, winches, etc. affect lift height)
• COMPLETE SOLUTION: Kit includes two sway bar spacers, Rancho RS9000XL front struts (coil springs not included) and mounting hardware to accommodate tires up to 285/60R20 (must use OE springs and top mounting components)
• DELIVERS SUPERIOR PERFORMANCE: Rancho RS9000XL struts with nine-position damping control for superior on-road comfort and off-road performance
• ENHANCED CONTROL: Sway bar spacers correct end link angles for roll and sway control
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• COMPLETE PERFORMANCE UPGRADE: Transform your suspension with Rancho RS9000XL rear shocks (RS999198)
• NOTES: Allows the use of OE wheels/tires; must use OE springs and top mounting components; trimming required for 20X9 +18 wheel and 285/60R20 tire (tire size varies between manufacturers)
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

Product Features:

• ORDERING INFO: Box 2 of 3 for master kit RS66311R9; must order RS66311R9-1, RS66311R9-2 and RS66311R9-3 for a complete kit
• COMPATIBILITY: Designed for Chevrolet Silverado 1500 (excludes Trail Boss) and GMC Sierra 1500 trucks (excludes AT4)
• LIFTS AND LEVELS VEHICLE: Fits up to 33-in. tires, system lifts front by 3-in. while rear blocks raise the back an additional 1.5-in. to level the truck (trimming required for 33-in. tires; bumpers, winches, etc. affect height)
• COMPLETE SOLUTION: Includes Rancho RS9000XL struts and rear shocks, upper control arms with ball joints, rear block kit, sway bar spacers and mounting hardware
• NINE LEVELS OF ADJUSTMENT: Rancho RS9000XL shocks and struts feature nine-position knob for customized damping control and firmness for on-road and off-road flexibility
• BUILT TO PERFORM: Control arms keep the preinstalled ball joints in their normal operating range, provide additional caster to aid in alignment and add wheel travel
• ENGINEERED TO LAST: Brackets fabricated from high-strength, low-alloy steel for long life while control arms feature durable OE-style rubber bushings and ball joints for easy maintenance and quiet operation
• EASY TO INSTALL: Bolt-on installation for an easy upgrade
• NOTES: Maintains OE alignment specs and won’t affect electronic stability system, allows the use of OE wheels/tires; must use OE springs and top mounting components (tire size varies between manufacturers)
• BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty

SUSP KIT

Product Features:

• Body: 2.5 Inch Impact Extruded And CNC Machined 6061-T6 Hard Anodized Aluminum Body Resists Rust Over Time
• Reservoir External Reservoir Design Separates Shock Oil From The High-Pressure Nitrogen
• Shaft 7/8 Inch Hard Chrome Plated Heat Treated Alloy Steel
• Piston, Race-Developed High-Flow Piston Design
• Seals Redundant Sealing Pack System, Main Seal, Wiper Seal, Scraper Seal
• Oil JM92 Advanced Suspension Fluid For Improved Performance At Variable Temperatures

Shock Kit

Shock Kit

aFe Control Sway-A-Way High Performance replacement 2.0 in. shock absorbers for the 2007-2014 GM 1500 Trucks and SUVs (non HD) feature all the same race winning engineering components that have set the standard in competition racing for the past 20+ years. This kit offers excellent off road damping without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature a zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

• CNC Machined Components Made To The Strictest Tolerances
• Polished Nitro Steel Shaft for Strength And Durability
• Teflon Lined Steel Spherical Bearings
• Multi-Seal Carrier To Ensure Zero Leakage

Timbren suspension enhancement system. The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

This SES Suspension Upgrade fits the front suspension of a Chevrolet Silverado 1500 and GMC Sierra 1500 pickup truck. Each laser cut piece of steel is precision bent and powder coated to ensure a quality fit. We have engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent front end sag.

Product Features:

• Eliminate Vehicle Squatting And Sagging
• Improved Handling For Vehicles Equipped With Snowplows
• Cushion Road Shocks
• Improve Handling