2020 Chevrolet Corvette Engine Parts
Find Your Specific 2020 Chevrolet Corvette Engine Parts
Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2020 Corvette. Advance Auto Parts has popular Corvette parts like Engine Switches, Sensors and Relays, Valve Cover and Cylinder Heads, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Corvette model years including
2014,
2015,
2016,
2017,
2018,
2019,
2021,
2022,
2023 and more. Select a category of 2020 Chevrolet Corvette Engine Parts below and start saving instantly.
Popular 2020 Chevrolet Corvette Engine Parts Categories
Essential Engine Parts for 2020 Chevrolet Corvettes
Felpro – Fuel Pump Mounting Gasket (Part No.73158)
from
$5.99
Fuel Pump Mounting Gasket
Mr. Gasket – Ultra Seal: Valve Cover Gasket Set (Part No.5861)
from
$44.99
Ultra-Seal is Mr. Gasket premium valve cover gasket material. It’s manufactured from a high density cork and rubber blend with a black latex coat applied to the outside to help seal minor flange irregularites and eliminate oil leakage. It creates a positive seal by controlled swelling of the gasket material when exposed to hot oil. For original equipment replacement, high performance street, drag race and oval track use. Sold as a pair. These gaskets are an extra thick .312 inch which can help with valvetrain clearance.
Product Features:
See More
Product Features:
- Manufactured from high-density cork /rubber blend gasket material
- A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage
- Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil
- For OE replacement, high performance street, drag race and oval track
- An extra thick .312″ which can help with valvetrain clearance
GM Genuine Parts – Engine Camshaft Position Sensor (Part No.12623093)
from
$29.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine timing and fuel injection running in sync
- Helps provide proper alignment, positioning, and spacing for easy installation
- Synchronizes engine valves and pistons for excellent engine performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Schaeffler – Shaft Seal (Part No.SS3405)
from
$65.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
GM Genuine Parts – Gen III/IV Lifter Guide (Part No.12595365)
from
$14.99
GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Cloyes Performance – Engine Camshaft Thrust Washer (Part No.9-203)
from
$14.99
Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.
Product Features:
See More
Product Features:
- Heat Treated Steel Bearing Race Material
- Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
- Prevents Wear On Engine Block
- Can be Used to Repair a Damaged Engine Block Thrust Surface.
Cloyes Gear – Engine Timing Chain (Part No.9-4194)
from
$43.99
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Imperial – Engine Oil Cooler (Part No.241046)
from
$248.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Swirl-Cool engine oil cooler kit
- Size: 1-1/2″ x 6-1/2″ x 18″
- Heavy-duty applications
- Chevrolet V8 applications
- Size: 1.5 in. x 6.5 in. x 18 in.
- Heavy duty applications
- Specifically designed for Chevrolet V8 applications with metal line kit for easier installation
- Two-pass design for increased cooling
- Size: 1.5 in. x 6.5 in. x 18 in.
- Heavy duty applications
- Specifically designed for Chevrolet V8 applications with metal line kit for easier installation
- Two-pass design for increased cooling
GM Genuine Parts – Oil Pan Seal (Part No.12621086)
from
$15.49
GM Genuine Parts Engine Oil Pan Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Melling – Stock Replacement Oil Galley Plug (Part No.MOGP-200)
from
$7.99
Product Features:
See More
- Precision engineered for optimum fit and function
- Manufactured from high quality materials for consistent durable wear
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
Felpro – Engine Oil Filler Cap Seal (Part No.73193)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Crankshaft Seal Kit (Part No.BS 11829-1)
from
$20.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)
from
$12.99
Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.
See More
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72856)
from
$32.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Sealed Power – Engine Valve Lifter (Part No.AT-992)
from
$8.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Retro-fit performance
- High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
- Eliminates frequent lash adjustments
- Significant friction reduction substantially increases horsepower and fuel economy
- Delivers quieter engine operation
- Application-specific design for perfect fit and correct operation
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72527)
from
$22.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE – Available for domestic and foreign nameplate vehicles
GM Genuine Parts – Oil Pan Gasket (Part No.12666993)
from
$6.29
GM Genuine Parts Engine Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Felpro – Engine Oil Pan Gasket Set – Blue Stripe cork-rubber (Part No.OS 5197 C-2)
from
$43.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
- SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
Felpro – Engine Oil Dipstick Tube O-Ring (Part No.73889)
from
$0.99
Engine Oil Dipstick Tube O-Ring
Carquest Premium – Engine Oil Level Sensor (Part No.SBA3659)
from
$34.99
The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)
from
$69.99
The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Product Features:
See More
- Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
- High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
- Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
- Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up
Sealed Power – Engine Assembly Lubricant (Part No.55-400)
from
$10.49
Sealed Power parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Formulated for pre-lubrication cam lobes, lifters & engine bearings
- Increases load carrying capacity
- Holds fast to surfaces
- Exacting tolerances
- Meets or exceeds OEM specifications
- 4.0 oz. Squeeze Container
NTK – Engine Crankshaft Position Sensor (Part No.EH0403)
from
$62.99
The Crankshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position of then engine’s crankshaft to the ECM. The ECM then uses this information to determine fuel and spark timing or engine misfire detection. A failed sensor can result in a check engine light, failure to start, intermittent stalling, or misfire. Crankshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.
Product Features:
See More
Product Features:
- THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
- OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the crankshaft
- EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
- PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
- INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors
GM Genuine Parts – Crankshaft Position Sensor (Part No.12703627)
from
$68.99
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine timing and fuel injection running in sync
- Helps provide proper alignment, positioning, and spacing for easy installation
- Synchronizes engine valves and pistons for excellent engine performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Fiber-Faced Engine Cylinder Head Gasket (Part No.7619 B)
from
$24.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Validated for fit, form, and function
- Unsurpassed quality you can trust
Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.501 SD)
from
$42.99
Product Features:
See More
- DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
- STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
- PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
- SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Felpro – Severe Duty Engine Cylinder Head Gasket (Part No.505 SD)
from
$32.99
Product Features:
See More
- DESIGNED FOR THE TOUGHEST CONDITIONS – Engineered for hardworking vehicles that operate in severe conditions
- STRONG AND DURABLE – Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
- PREMIUM MATERIALS – High-grade stainless armor enhances strength and corrosion resistance while proprietary coatings enhance sealing and anti-stick properties
- SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Upgrade your 2020 Chevrolet Corvette with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 2020 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Engine Parts for the 2020 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Engine Switches, Sensors and Relay
replacements to
Valve Cover and Cylinder Heads
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2020 Chevrolet Corvette at great prices.
Our Engine Parts inventory for this model
ranges from just $0.99 to $248.99, with
an average price of $48.38.
Our 31 Engine Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2020 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Chevrolet Corvette, we stock popular OEM and aftermarket Engine Parts from top names
like Imperial, and more.
Imperial Engine Parts
start at just $122.99 and boast an impressive 4.1 stars average rating from customers.
With 7 customer reviews and counting, our 2020 Chevrolet Corvette Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 2020 Chevrolet Corvette!
Best-Selling Engine Switches, Sensors and Relays for 2020 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 4 quality Engine Switches, Sensors and Relay components, starting at $29.99.
GM Genuine Parts – Engine Crankshaft Position Sensor (Part No.12669636)
from
$41.49
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps keep engine timing and fuel injection running in sync
- Helps provide proper alignment, positioning, and spacing for easy installation
- Synchronizes engine valves and pistons for excellent engine performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSA1928)
from
$36.99
Carquest Premium crankshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Engineered with technology that provides increased accuracy with a stronger, more consistent signal
- Sensors are based on proven hall effect and variable reluctance technology
- Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
- O-rings and seals are included if required.
- Weather-tight connectors prevent leaks and corrosion for better reliability.
- Extensive design validation testing and 100% end-of-line tested.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)
from
$69.99
The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Dorman – Magnetic Crankshaft Position Sensor (Part No.962-602)
from
$29.99
This engine crankshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine crankshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Most Popular 2020 Chevrolet Corvette Valve Cover and Cylinder Heads
Customize your Chevrolet with 6 Valve Cover and Cylinder Heads products
like Engine Valve Lifters,
Cylinder Head Bolt Sets, and
Cylinder Head Gaskets, all
priced under $78.99.
Sealed Power – Engine Valve Lifter (Part No.HT-2148A)
from
$24.99
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
- New OEM riveted pin retaining design
Felpro – Engine Oil Filler Cap Seal (Part No.73193)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 73121)
from
$56.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26749 PT)
from
$78.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
- UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
GM Genuine Parts – Engine Valve Lifter Guide (Part No.12669184)
from
$19.49
GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)
from
$12.99
Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.
See More
Top Picks for 2020 Chevrolet Corvette Engine Gaskets and Seals
Upgrade Chevrolet Corvettes with top-quality Engine Gaskets and Seals parts, including 7 OEM and aftermarket selections for your 2020 model.
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71039)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE – Available for domestic and foreign nameplate vehicles
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50907 R)
from
$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
- PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
- PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
- OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Transmission Pan Gasket (Part No.51G07MRG)
from
$46.99
Mr. Gasket Transmission Oil Pan Gaskets offer simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading and a rubber coated binder to create a strong, long lasting seal perfect for the demands of high fluid temperatures created in transmissions. Whether you are sitting in heavy traffic, racing, off-roading or just want a clean garage floor, these premium transmission pan gaskets from Mr. Gasket have you covered.
Product Features:
See More
Product Features:
- Requires no silicone for simple installation
- Excellent torque retention to prevent possible leaks caused from loosened bolts
- Aluminum carrier provides un-matched gasket strength, fit and durability
- Silicone elastomer beading provides a positive seal under severe temperatures and conditions
- Rubber coated sealing binder adds a third layer of protection and aids in the gaskets ability to seal even with small imperfections of mating surfaces
Victor Reinz – Engine Valve Cover Gasket (Part No.15-11180-01)
from
$25.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – RTV Silicone (Part No.70-31414-10)
from
$9.99
Product Features:
See More
- Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
- Insignificant shrinkage and loss of mass even in high-heat environments
- Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
- Sealing gap 0.006 in (0.15 mm)
GM Genuine Parts – GASKET (Part No.12619787)
from
$6.99
GASKET
Felpro – Fuel Pump Mounting Gasket (Part No.73158)
from
$5.99
Fuel Pump Mounting Gasket
In-Demand Camshafts for 2020 Chevrolet Corvettes
Select from 3 premium Camshafts parts for your 2020 Chevrolet Corvette, with prices ranging from $23.99 to $42.99.
Felpro – Engine Camshaft Thrust Plate (Part No.ES 73115)
from
$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Victor Reinz – Engine Camshaft Seal (Part No.71-18369-00)
from
$24.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1959)
from
$23.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Engineered with technology that provides increased accuracy with a stronger, more consistent signal
- Sensors are based on proven hall effect and variable reluctance technology
- Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
- O-rings and seals are included if required.
- Weather-tight connectors prevent leaks and corrosion for better reliability.
- Extensive design validation testing and 100% end-of-line tested.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Most Sold 2020 Chevrolet Corvette Engine Timing Parts
Explore our best-selling Chevrolet parts for the 2020 Corvette among 1 OEM and aftermarket options starting from $44.49.
Cloyes Gear – Engine Timing Chain (Part No.9-4205)
from
$44.49
Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
- Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
- Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Top-Rated Engine Parts Brands For Your 2020 Chevrolet Corvette
Shop for the best-rated brands offering Engine Parts and other products for your 2020 Chevrolet Corvettes. Below you’ll find some of our best rated Engine Parts from Imperial, and more. Engine Parts from these brands that fit a 2020 Corvette start at just $122.99 and are rated as high as 4.1 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 2020 Chevrolet Corvette Engine Parts
When it comes to maintaining or upgrading your 2020 Chevrolet Corvette, using quality Engine Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Engine Parts, specifically designed for the 2020 Chevrolet Corvette. With over 2 Imperial brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $122.99, with an average price of just $157.49. Plus, with over 4 customer reviews and an average rating of 4.1 stars, you can trust that our Imperial Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$122.99
(3)
Econo-Kool® Engine Oil Cooler
“Good price perfect fit had all the parts I needed good quality”
from
$191.99
(1)
Ultra-Cool Engine Oil Cooler Kit
“Purchased for a 2005 Yukon XL Denali. Exceeded expectations for an aftermarket product”
FAQs for 2020 Chevrolet Corvette Engine Parts
Which Engine Parts are best-sellers for 2020 Chevrolet Corvettes?
Out of 31 Engine Parts that fit 2020 Chevrolet Corvettes, the following parts are the top sellers:
- Engine Valve Lifter (12486346) – $24.99
- Engine Valve Stem Oil Seal Set (20680518) – $37.99
- Engine Oil Filler Cap Seal (12005635) – $5.99
What’s the price range for 2020 Chevrolet Corvette Engine Parts?
Engine Part prices for the 2020 Chevrolet Corvette start at $0.99 and go up to $248.99 for the most premium parts.
What’s the average price of a Engine Part for a 2020 Chevrolet Corvette?
The average price for Engine Parts for the 2020 Chevrolet Corvette is $48.38. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Chevrolet Corvette model years?
What are the cheapest Engine Parts for my 2020 Chevrolet Corvette?
The cheapest 2020 Chevrolet Corvette Engine Parts we carry in stock are:
- Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
- Engine Oil Filler Cap Seal (12005635) – $5.99
- Fuel Pump Mounting Gasket (50251311) – $5.99
- GASKET (50233893) – $6.99
- Stock Replacement Oil Galley Plug (50175374) – $7.99
What are the top-rated Engine Parts that fit the 2020 Chevrolet Corvette?
Out of 7 reviews by customers, our 2020 Chevrolet Corvette Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2020 Chevrolet Corvette and their top-rated products:
- Engine Gaskets and Seals
- Engine Valve Stem Oil Seal Set (20680518) – $37.99
What types of Engine Parts do you sell for my 2020 Chevrolet Corvette?
As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2020 Chevrolet Corvette:
Can I get help with 2020 Chevrolet Corvette Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.
What is your return policy for Chevrolet Corvette Engine Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
