2020 Chevrolet Colorado Engine Parts
Find Your Specific 2020 Chevrolet Colorado Engine Parts
Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2020 Colorado. Advance Auto Parts has popular Colorado parts like Engine Mounts, Camshafts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other Colorado model years including
2011,
2012,
2015,
2016,
2017,
2018,
2019,
2021,
2022 and more. Select a category of 2020 Chevrolet Colorado Engine Parts below and start saving instantly.
Popular 2020 Chevrolet Colorado Engine Parts Categories
Essential Engine Parts for 2020 Chevrolet Colorados
aFe POWER – Hot Charge Pipe (Part No.46-20268-R)
from
$481.99
The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..
Product Features:
See More
Product Features:
- Powder Coated Wrinkle Black For Heat Resistance
- Works w/aFe or OE Intercooler
- High Quality Clamps and Hi Temp Silicone Couplings For Durability
- Increased Flow and Performance For More Power
Dorman – Harmonic Balancer Bolt (Part No.A2211703503DOR)
from
$7.87
Our Engine Harmonic Balancer Bolt locks the harmonic balancer onto the crankshaft. All our Engine Harmonic Balancer Bolts are made of high quality materials for durability.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit
- No special tools required
- Easy to install
- Harmonic Balancers also available, sold separately
ACDelco – Engine Crankshaft Position Sensor (Part No.213-4208)
from
$38.99
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Helps keep engine timing and fuel injection running in sync
- Helps provide proper alignment, positioning, and spacing for easy installation
- Synchronizes engine valves and pistons for excellent engine performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Variable Valve Timing Solenoid (Part No.916-935)
from
$44.49
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
- Durable construction – this part is made from quality materials to ensure a long service life.
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
Cloyes Gear – Engine Balance Shaft Chain (Part No.C728F)
from
$39.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- 1/4″ IT Pitch X 110 Links
Felpro – Fuel Pump Mounting Gasket Set (Part No.ES 73194)
from
$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Cloyes Gear – OIL PUMP SPROCKET (Part No.S1121)
from
$31.99
OIL PUMP SPROCKET
Carquest Premium – Camshaft Sensor (Part No.CSC1054)
from
$45.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Dorman – OE Solutions Variable Timing Camshaft Gear (Part No.A54001154195DOR)
from
$269.49
Engineered from durable steel and conveniently packaged with the bolt that attaches the cam shaft phaser to the cam shaft. Dorman’s Engine Variable Valve Timing Sprocket adjusts the timing of the motor to ensure that you get the engine power you need when you need it. The Sprocket dials the timing back when you don’t, restoring fuel economy and maintaining engine efficiency.
Product Features:
See More
Product Features:
- Replacement stops ticking noise
- Direct replacement for a proper fit every time
- Precision-machined for accurate, dependable operation
- Vehicle try-on testing and rigorous materials testing have been conducted on this part to ensure a trouble-free performance
ACDelco – Valve Cover Gasket (Part No.A8030547464ACD)
from
$8.34
Valve Cover Gasket
Cloyes Gear – Balance Shaft Timing Chain Kit: Exact Fit, 66 Links, Balance Shaft Components, With Sprockets (Part No.9-0919S)
from
$67.99
Designed for the replacement of worn or damaged balance shaft chains, tensioners, and guides, Balance Shaft Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Dorman – Timing Chain Tension Kit (Part No.420-129)
from
$131.99
This engine timing chain tensioner is designed to match the fit and function of the original tensioner on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this engine timing chain tensioner is designed to match the fit and function of the original tensioner on specified applications.
- Recommended for replacement when a new timing chain and pulleys are installed.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Engine Oil Level Sensor FFC1241 (Part No.FFC1241)
from
$43.99
The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
- Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Bosch – Pressure Sensor (Part No.0281006076)
from
$35.99
Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range
Product Features:
See More
Product Features:
- Bosch OE quality pressure sensors for accurate measurements
- Bosch OE quality pressure sensors for long term stability
- Bosch OE quality pressure sensors with a short response time
- Bosch OE quality pressure sensors with improved media resistance
Mahle – Intake Manifold Gask (Part No.A8040495670MAH)
from
$30.31
Intake Manifold Gask
Dorman – Camshaft Phaser- Variable Timing Camshaft Gear (Part No.918-199)
from
$184.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket fits and performs like the original sprocket
- Durable construction – made from durable steel and precision machined for reliable performance
- 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
- Quality assured – vehicle-specific application has been validation tested to ensure quality
Dorman – Help – Camshaft Retainer Bolt (Part No.74114)
from
$7.99
This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models.
- Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
- Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40739)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72942-1)
from
$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
PowerBond – SC Performance 8 Rib 10% Overdrive Harmonic Balancer; 214mm Diameter (Part No.PBO81190SC10)
from
$456.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
Product Features:
See More
Product Features:
- Designed as premium OEM replacement balancers for serpentine and V-belt drives
- Manufactured with ductile iron casting and injection bonded dampening rubber
- Engineered to offer superior bonding strength between the balancer rings
aFe POWER – Cold Charge Pipe (Part No.46-20269-R)
from
$481.99
The Bladerunner charge pipes produce 20 hp and 63 lbs./ft/ torque and outflow the factory tubes by 45 percent. With the increased flow of this Charge Pipe it will reduce you exhaust gas temperatures by 100 deg..
Product Features:
See More
Product Features:
- Powder Coated Wrinkle Black For Heat Resistance
- Works w/aFe or OE Intercooler
- High Quality Clamps and Hi Temp Silicone Couplings For Durability
- Increased Flow and Performance For More Power
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S913)
from
$65.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Carquest Premium – New MAP SENSOR (Part No.ECE1033)
from
$63.99
The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.
Product Features:
See More
Product Features:
- Made to OE spec to ensure a proper fit, form and function.
- Sensors are engineered for precision performance, durability and a long service life.
- All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.
Anchor – Engine Mount: Front Right, 1 Piece (Part No.3120)
from
$56.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 04-12; GMC 04-12; HUMMER 06-10; ISUZU 06-08;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2004-2012
- Weight approx: 5 Lbs
- PART GROUP: 3120, 3121
ACDelco – Water Pipe Gasket (Part No.G2048556942ACD)
from
$12.74
Water Pipe Gasket
Felpro – O-RING (Part No.73193)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
aFe POWER – BladeRunner Series (Part No.46-20260AS)
from
$354.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Product Features:
See More
Product Features:
- Hassle-Free Installation
- AFE Replacement Couplings and Clamps
- Heavy Duty High Temp 5 Ply Polyester
Upgrade your 2020 Chevrolet Colorado with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 2020 Chevrolet Colorado, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Colorado functioning at its best. At Advance Auto Parts, we offer a wide selection of 72 Engine Parts for the 2020 Chevrolet Colorado, designed to meet your needs without breaking the bank.
From
Engine Mount
replacements to
Camshafts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2020 Chevrolet Colorado at great prices.
Our Engine Parts inventory for this model
ranges from just $4.49 to $751.99, with
an average price of $81.67.
Our 72 Engine Parts in stock come from 18 trusted brands, so you’re sure to find the right part for your 2020 Chevrolet Colorado without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Chevrolet Colorado, we stock popular OEM and aftermarket Engine Parts from top names
like ACDelco, and more.
ACDelco Engine Parts
start at just $6.15 and boast an impressive 5 stars average rating from customers.
With 6 customer reviews and counting, our 2020 Chevrolet Colorado Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2020 Chevrolet Colorado is always ready to roll. We’re committed to providing you with everything you need to keep your Colorado in top shape, all in one place.
Start shopping confidently below for your 2020 Chevrolet Colorado!
Best-Selling Engine Mounts for 2020 Chevrolet Colorados
Enhance the driving experience in your Chevrolet with 2 quality Engine Mount components, starting at $73.99.
Anchor – Engine Mount: Front Left, 1 Piece (Part No.3349)
from
$97.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 15-21; GMC 15-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2021
- Weight approx: 5 Lbs
- HYDRAULIC
- REUSE BRACKET
- PART GROUP: 3349, 3350
Anchor – Engine Mount: Front Right, 1 Piece (Part No.3350)
from
$73.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CHEV 15-21; GMC 15-21;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2015-2021
- Weight approx: 5 Lbs
- HYDRAULIC
- REUSE BRACKET
- PART GROUP: 3349, 3350
Most Popular 2020 Chevrolet Colorado Camshafts
Customize your Chevrolet with 8 Camshafts products
like Camshaft Position Sensors,
Engine Camshaft Bolts, and
Camshaft Lubes, all
priced under $113.99.
Dorman – Help – Camshaft Retainer Bolt (Part No.74114)
from
$7.99
This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models.
- Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
- Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
ACDelco – Engine Camshaft Position Sensor (Part No.12638266)
from
$59.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps keep engine timing and fuel injection running in sync
- Helps provide proper alignment, positioning, and spacing for easy installation
- Synchronizes engine valves and pistons for excellent engine performance
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)
from
$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA4031)
from
$111.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.
Product Features:
See More
Product Features:
- Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
ACDelco – Camshaft Position Se (Part No.A4015458518ACD)
from
$78.51
Camshaft Position Se
Dorman – Magnetic Camshaft Position Sensor (Part No.962-055)
from
$37.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
Product Features:
See More
Product Features:
- Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA4472)
from
$28.49
Engine Camshaft Position Sensor
GM Genuine Parts – Camshaft Sprocket O-Ring (Part No.12574477)
from
$11.29
GM Genuine Parts Engine Camshaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
- GM regularly updates production and service part designs to integrate new materials and technologies
Top Picks for 2020 Chevrolet Colorado Engine Gaskets and Seals
Upgrade Chevrolet Colorados with top-quality Engine Gaskets and Seals parts, including 15 OEM and aftermarket selections for your 2020 model.
ACDelco – Valve Cover Gasket (Part No.A8030547468ACD)
from
$16.80
Valve Cover Gasket
ACDelco – Valve Cover Gasket (Part No.A8030547462ACD)
from
$10.22
Valve Cover Gasket
ACDelco – Valve Cover Gasket (Part No.A8030547459ACD)
from
$8.34
Valve Cover Gasket
Mahle – Intake Manifold Gask (Part No.A8040495670MAH)
from
$30.31
Intake Manifold Gask
Felpro – Fuel Pump Mounting Gasket Set (Part No.ES 73194)
from
$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72942-1)
from
$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Worldpac – INTAKE MANIFOLD GASK (Part No.A8040495670ACD)
from
$43.46
INTAKE MANIFOLD GASK
Elring – Fuel Pump Gasket – M (Part No.E3011421234ELR)
from
$21.05
Fuel Pump Gasket – M
ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289666ACD)
from
$17.61
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Mahle – Water Pipe Gasket (Part No.G2048556954MAH)
from
$9.05
Water Pipe Gasket
Mahle – Water Flange Gasket (Part No.G20292943731MAH)
from
$9.02
Water Flange Gasket
ACDelco – Valve Cover Gasket (Part No.A8030547464ACD)
from
$8.34
Valve Cover Gasket
ACDelco – Valve Cover Gasket (Part No.A8030547467ACD)
from
$8.34
Valve Cover Gasket
GM Genuine Parts – Inner Valve Cover Gasket (Part No.12627105)
from
$6.29
GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
ACDelco – Water Pump Gasket (Part No.G3040742988ACD)
from
$6.15
Water Pump Gasket
In-Demand Engine Timing Parts for 2020 Chevrolet Colorados
Select from 21 premium Engine Timing Parts parts for your 2020 Chevrolet Colorado, with prices ranging from $17.99 to $625.99.
ACDelco – Intake Variable Valve Timing (VVT) Solenoid (Part No.12662736)
from
$61.99
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Coated to help protect against premature corrosion
- Designed to match OEM calibration to provide the performance you expect from GM
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Exhaust Variable Valve Timing (VVT) Solenoid (Part No.12662737)
from
$59.99
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Coated to help protect against premature corrosion
- Designed to match OEM calibration to provide the performance you expect from GM
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1044)
from
$49.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1009)
from
$47.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – 12662736 GM Original Equipment Intake Variable Valve Timing (VVT) Solenoid (Part No.A5132811476ACD)
from
$68.56
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and fuel economy. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Coated to protect against premature corrosion
- Designed to match OEM calibration to provide the performance you expect from GM
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1358)
from
$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cloyes Gear – TIMING CHAIN KIT (Part No.9-0951S)
from
$625.99
TIMING CHAIN KIT
Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 154 Links, Timing/Balance Shaft Components, With Sprockets (Part No.9-0918S)
from
$229.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
ACDelco – Camshaft Position Actuator (Part No.25203205)
from
$194.99
ACDelco GM Original Equipment Camshaft Phasers adjust camshaft positioning while your vehicle’s engine is running, and are GM-recommended replacements for your vehicle’s original components. They help ensure the camshaft rotates in the correct timing with other valve train components to provide optimal engine performance, and work with your vehicle’s variable valve timing solenoid to help maximize drive quality and fuel economy. These original equipment phasers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps ensure optimal camshaft positioning
- Works alongside your vehicle’s VVT solenoid to help maximize drive quality and fuel economy
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 154 Links, Timing/Balance Shaft Components, Without Sprockets (Part No.9-0918SX)
from
$187.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 154 Links, Timing Components, With Sprockets (Part No.9-0918SA)
from
$152.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Dorman – Camshaft Phaser (Part No.916-630)
from
$112.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
Product Features:
See More
Product Features:
- Direct replacement – this VVT sprocket fits and performs like the original sprocket.
- Durable construction – made from durable steel and precision machined for reliable performance.
- 100% new – this variable valve timing sprocket is entirely new, not a remanufactured part
- Quality assured – vehicle-specific application has been validation tested to ensure quality
Worldpac – TIMING CHAIN TENSION (Part No.A5110499026ACD)
from
$72.60
TIMING CHAIN TENSION
Cloyes Gear – Balance Shaft Timing Chain Kit: Exact Fit, 66 Links, Balance Shaft Components, With Sprockets (Part No.9-0919S)
from
$67.99
Designed for the replacement of worn or damaged balance shaft chains, tensioners, and guides, Balance Shaft Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.
Product Features:
See More
Product Features:
- Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
- Utilizes the latest in design and technology to offer a complete chain kit solution
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
ACDelco – 12662737 GM Original Equipment Exhaust Variable Valve Timing (VVT) Solenoid (Part No.A5132811478ACD)
from
$66.47
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and fuel economy. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Coated to protect against premature corrosion
- Designed to match OEM calibration to provide the performance you expect from GM
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
WSO – Camshaft Solenoid Ad (Part No.A5132811476WSO)
from
$57.98
Camshaft Solenoid Ad
Dorman – Variable Valve Timing Solenoid (Part No.916-935)
from
$44.49
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
- Durable construction – this part is made from quality materials to ensure a long service life.
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
Dorman – Variable Valve Timing Solenoid (Part No.916-519)
from
$37.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
- Durable construction – this part is made from quality materials to ensure a long service life.
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
Cloyes Gear – CRANKSHAFT SPROCKET (Part No.S1120)
from
$32.99
CRANKSHAFT SPROCKET
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1433)
from
$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Cloyes Gear – Engine Balance Shaft Chain (Part No.C919)
from
$17.99
Product Features:
See More
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Refer to our online catalog for detailed application-specific information
- Keep your engine’s valvetrain in perfect time with Cloyes, the world leader in timing drive systems
Most Sold 2020 Chevrolet Colorado Valve Cover and Cylinder Heads
Explore our best-selling Chevrolet parts for the 2020 Colorado among 1 OEM and aftermarket options starting from $4.49.
Felpro – O-RING (Part No.73193)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Top-Rated Engine Parts Brands For Your 2020 Chevrolet Colorado
Shop for the best-rated brands offering Engine Parts and other products for your 2020 Chevrolet Colorados. Below you’ll find some of our best rated Engine Parts from ACDelco, and more. Engine Parts from these brands that fit a 2020 Colorado start at just $6.15 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular ACDelco 2020 Chevrolet Colorado Engine Parts
When it comes to maintaining or upgrading your 2020 Chevrolet Colorado, using quality Engine Parts is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Engine Parts, specifically designed for the 2020 Chevrolet Colorado. With over 17 ACDelco brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.15, with an average price of just $47.88. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2020 Chevrolet Colorado Engine Parts
Which Engine Parts are best-sellers for 2020 Chevrolet Colorados?
Out of 72 Engine Parts that fit 2020 Chevrolet Colorados, the following parts are the top sellers:
- Camshaft Retainer Bolt (11870519) – $7.99
- O-RING (12005635) – $4.49
- Engine Camshaft Position Sensor (11930433) – $59.99
What’s the price range for 2020 Chevrolet Colorado Engine Parts?
Engine Part prices for the 2020 Chevrolet Colorado start at $4.49 and go up to $751.99 for the most premium parts.
What’s the average price of a Engine Part for a 2020 Chevrolet Colorado?
The average price for Engine Parts for the 2020 Chevrolet Colorado is $81.67. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Chevrolet Colorado model years?
What are the cheapest Engine Parts for my 2020 Chevrolet Colorado?
The cheapest 2020 Chevrolet Colorado Engine Parts we carry in stock are:
- O-RING (12005635) – $4.49
- Water Pump Gasket (12173800) – $6.15
- Inner Valve Cover Gasket (12518486) – $6.29
- Harmonic Balancer Bolt (11811577) – $7.87
- Camshaft Retainer Bolt (11870519) – $7.99
What types of Engine Parts do you sell for my 2020 Chevrolet Colorado?
As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2020 Chevrolet Colorado:
Can I get help with 2020 Chevrolet Colorado Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.
What is your return policy for Chevrolet Colorado Engine Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Colorado Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
