2020 Cadillac Escalade Engine Timing Parts

INA Timing Chains are designed to meet or exceed OE quality and performance. All our chain Plates and Pins are heat treated to precise hardness for maximum performance and durability.

“High Performance 3/8″” Pitch Single Roller Replacement TRUE Roller “”Z Chain”” Chain. 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.”

INA Timing Chains are designed to meet or exceed OE quality and performance. All our chain Plates and Pins are heat treated to precise hardness for maximum performance and durability.

“High Performance 3/8″” Pitch Single Roller Replacement TRUE Roller Chain. 0.250″” Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.”

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

ACDelco GM Original Equipment Engine Timing Damper Kits remove unnecessary slack from the timing chain to help prevent chain rattle and excessive component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment engine timing damper kits contain components that will provide the same performance, durability, and service life you expect from General Motors.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.

Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.

INA timing chain kits include all essential components to ensure that the repair is done right the first time. Each kit contains all necessary chains, tensioners, and guides. In certain applications the kit also contains the necessary gears and sprockets, along with a specially formulated, high performance, chain additive uniquely made for Schaeffler by Liqui Moly. The chain additive helps reduce friction during the break in period and reduces run-in wear by up to twenty percent.

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

This replacement VVT oil control valve is a direct replacement for a worn or leaking original equipment valve. Made of quality materials for durability, this part has been tested to ensure a proper fit.

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support. 

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

“Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Sprockets are Heat Treated for Durability. Heavy Duty Half Inch Pitch Single Roller Chain for Reduced Friction.

Tensioner Elimination Kit for GM LS Engines Equipped with VVT. Kit Replaces the Chain and Crankshaft Sprocket to Tighten the Chain Fitment and Eliminate the Factory Tensioner.

“Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″” Roller Diameter “”Z”” Chain for Reduced Friction. “”Z”” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “”Z”” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”

This replacement camshaft adjuster magnet is a direct replacement for a damaged original equipment magnet. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.