2020 Buick Envision Engine Parts

Essential Engine Parts for 2020 Buick Envisions

ACDelco – Engine Crankshaft Position Sensor (Part No.12674702)

Engine Crankshaft Position Sensor

from

$69.99
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Rotomaster – New Turbocharger (Part No.M1040106N)

New Turbocharger

from

$668.99
New Turbocharger

Cloyes Gear – TIMING CHAIN KIT (Part No.9-0918STC)

TIMING CHAIN KIT

from

$1201.99
TIMING CHAIN KIT

Dorman – Harmonic Balancer Assembly (Part No.594-713)

Harmonic Balancer Assembly

from

$81.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:
  • Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction – stringent specifications and careful construction help ensure longevity.
  • Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Fuel Pump Mounting Gasket Set (Part No.ES 73194)

Fuel Pump Mounting Gasket Set

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

ACDelco – Engine Camshaft Position Sensor (Part No.12638266)

Engine Camshaft Position Sensor

from

$59.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Harmonic Balancer Bolt (Part No.A2211703503DOR)

Harmonic Balancer Bolt

from

$7.87
Our Engine Harmonic Balancer Bolt locks the harmonic balancer onto the crankshaft. All our Engine Harmonic Balancer Bolts are made of high quality materials for durability.

Product Features:
  • Direct replacement for a proper fit
  • No special tools required
  • Easy to install
  • Harmonic Balancers also available, sold separately
See More

ACDelco – Exhaust Variable Valve Timing (VVT) Solenoid (Part No.12662737)

Exhaust Variable Valve Timing (VVT) Solenoid

from

$59.99
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Coated to help protect against premature corrosion
  • Designed to match OEM calibration to provide the performance you expect from GM
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Imperial – Ultra-Cool Engine Oil Cooler Kit (Part No.240457)

Ultra-Cool Engine Oil Cooler Kit

from

$184.99
Product Features:
  • Size: 3/4 in. x 10 in. x 12-1/4 in.
  • Medium duty applications
  • All except Chevrolet V8 applications
  • Two-pass design for increased cooling
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72942-1)

Engine Valve Stem Oil Seal Set

from

$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Mahle – Crankshaft Seal (Part No.A8060102325MAH)

Crankshaft Seal

from

$44.34
Crankshaft Seal

Felpro – O-RING (Part No.73193)

O-RING

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Dorman – Help – Camshaft Retainer Bolt (Part No.74114)

Camshaft Retainer Bolt

from

$7.99
This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models.
  • Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Worldpac – TIMING CHAIN TENSION (Part No.A5110499026ACD)

TIMING CHAIN TENSION

from

$72.60
TIMING CHAIN TENSION

Dorman – OIL PAN (Part No.264-556)

OIL PAN

from

$157.99
OIL PAN

Spartan – Engine Cylinder Head; Chev 2.0 13-15 LTG Head (Part No.2CAD)

Engine Cylinder Head; Chev 2.0 13-15 LTG Head

from

$868.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Mahle – Intake Manifold Gask (Part No.A8040495670MAH)

Intake Manifold Gask

from

$30.31
Intake Manifold Gask

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Stock Replacement Engine Assembly Lubricant

from

$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

GM Genuine Parts – Turbocharger Wastegate Solenoid (Part No.12649146)

Turbocharger Wastegate Solenoid

from

$238.99
GM Genuine Parts Turbocharger Wastegate Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Help – Engine Oil Dipstick – Metal (Part No.918-828)

Engine Oil Dipstick - Metal

from

$20.99
This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:
  • Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
  • Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – New MAP SENSOR (Part No.ECE1033)

New MAP SENSOR

from

$63.99
The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.

Product Features:
  • Made to OE spec to ensure a proper fit, form and function.
  • Sensors are engineered for precision performance, durability and a long service life.
  • All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.
See More

Cloyes Gear – Balance Shaft Timing Chain Kit: Exact Fit, 66 Links, Balance Shaft Components, With Sprockets (Part No.9-0919S)

Balance Shaft Timing Chain Kit: Exact Fit, 66 Links, Balance Shaft Components, With Sprockets

from

$67.99
Designed for the replacement of worn or damaged balance shaft chains, tensioners, and guides, Balance Shaft Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)

Engine Oil Level Sensor

from

$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Upgrade your 2020 Buick Envision with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2020 Buick Envision, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Engine Parts are key to keeping your Envision functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Engine Parts for the 2020 Buick Envision, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2020 Buick Envision at great prices. Our Engine Parts inventory for this model ranges from just $4.49 to $868.99, with an average price of $63.94. Our 65 Engine Parts in stock come from 20 trusted brands, so you’re sure to find the right part for your 2020 Buick Envision without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2020 Buick Envision, we stock popular OEM and aftermarket Engine Parts from top names like ACDelco, and more. ACDelco Engine Parts start at just $8.34 and boast an impressive 5 stars average rating from customers. With 38 customer reviews and counting, our 2020 Buick Envision Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2020 Buick Envision is always ready to roll. We’re committed to providing you with everything you need to keep your Envision in top shape, all in one place. Start shopping confidently below for your 2020 Buick Envision!

Best-Selling Engine Gaskets and Seals for 2020 Buick Envisions

Enhance the driving experience in your Buick with 14 quality Engine Gaskets and Seal components, starting at $6.29.

ACDelco – Valve Cover Gasket (Part No.A8030547468ACD)

Valve Cover Gasket

from

$16.80
Valve Cover Gasket

ACDelco – Valve Cover Gasket (Part No.A8030547462ACD)

Valve Cover Gasket

from

$10.22
Valve Cover Gasket

ACDelco – Valve Cover Gasket (Part No.A8030547459ACD)

Valve Cover Gasket

from

$8.34
Valve Cover Gasket

Mahle – Intake Manifold Gask (Part No.A8040495670MAH)

Intake Manifold Gask

from

$30.31
Intake Manifold Gask

Felpro – Fuel Pump Mounting Gasket Set (Part No.ES 73194)

Fuel Pump Mounting Gasket Set

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72942-1)

Engine Valve Stem Oil Seal Set

from

$58.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Worldpac – INTAKE MANIFOLD GASK (Part No.A8040495670ACD)

INTAKE MANIFOLD GASK

from

$43.46
INTAKE MANIFOLD GASK

Elring – Fuel Pump Gasket – M (Part No.E3011421234ELR)

Fuel Pump Gasket - M

from

$21.05
Fuel Pump Gasket – M

ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004289666ACD)

GM Original Equipment Fuel Pump Tank Seal

from

$17.61
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Mahle – Water Pipe Gasket (Part No.G2048556954MAH)

Water Pipe Gasket

from

$9.05
Water Pipe Gasket

Mahle – Water Flange Gasket (Part No.G20292943731MAH)

Water Flange Gasket

from

$9.02
Water Flange Gasket

ACDelco – Valve Cover Gasket (Part No.A8030547464ACD)

Valve Cover Gasket

from

$8.34
Valve Cover Gasket

ACDelco – Valve Cover Gasket (Part No.A8030547467ACD)

Valve Cover Gasket

from

$8.34
Valve Cover Gasket

GM Genuine Parts – Inner Valve Cover Gasket (Part No.12627105)

Inner Valve Cover Gasket

from

$6.29
GM Genuine Parts Engine Valve Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Most Popular 2020 Buick Envision Camshafts

Customize your Buick with 8 Camshafts products like Camshaft Position Sensors, Engine Camshaft Bolts, and Camshaft Lubes, all priced under $113.99.

Dorman – Help – Camshaft Retainer Bolt (Part No.74114)

Camshaft Retainer Bolt

from

$7.99
This VVT sprocket bolt is designed to match the fit and function of the original part on specified vehicles for a proper repair of the variable valve timing system. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this VVT sprocket bolt matches the fit and function of the factory part on specified years, make and models.
  • Ideal solution – this VVT sprocket bolt is a reliable replacement for an original part that has become stripped or broken during repair
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – Engine Camshaft Position Sensor (Part No.12638266)

Engine Camshaft Position Sensor

from

$59.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Camshaft Position Sensor (Part No.CSC1194)

Camshaft Position Sensor

from

$72.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Engineered with technology that provides increased accuracy with a stronger, more consistent signal
  • Sensors are based on proven hall effect and variable reluctance technology
  • Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
  • O-rings and seals are included if required
  • Weather-tight connectors prevent leaks and corrosion for longer life
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

NTK – Camshaft Position Sensor (Part No.EC0217)

Camshaft Position Sensor

from

$59.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Stock Replacement Engine Assembly Lubricant

from

$113.99
Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

ACDelco – Camshaft Position Se (Part No.A4015458518ACD)

Camshaft Position Se

from

$78.51
Camshaft Position Se

Dorman – Magnetic Camshaft Position Sensor (Part No.962-055)

Magnetic Camshaft Position Sensor

from

$37.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Camshaft Sprocket O-Ring (Part No.12574477)

Camshaft Sprocket O-Ring

from

$11.29
GM Genuine Parts Engine Camshaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Top Picks for 2020 Buick Envision Engine Switches, Sensors and Relays

Upgrade Buick Envisions with top-quality Engine Switches, Sensors and Relays parts, including 4 OEM and aftermarket selections for your 2020 model.

ACDelco – Engine Crankshaft Position Sensor (Part No.12674702)

Engine Crankshaft Position Sensor

from

$69.99
ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps keep engine timing and fuel injection running in sync
  • Helps provide proper alignment, positioning, and spacing for easy installation
  • Synchronizes engine valves and pistons for excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Engine Crankshaft Position Sensor (Part No.CSA1776)

Engine Crankshaft Position Sensor

from

$57.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Carquest Premium – Engine Oil Level Sensor (Part No.SBC1451)

Engine Oil Level Sensor

from

$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Magnetic Crankshaft Position Sensor (Part No.962-604)

Magnetic Crankshaft Position Sensor

from

$42.99
This engine crankshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

In-Demand Valve Cover and Cylinder Heads for 2020 Buick Envisions

Select from 2 premium Valve Cover and Cylinder Heads parts for your 2020 Buick Envision, with prices ranging from $4.49 to $868.99.

Felpro – O-RING (Part No.73193)

O-RING

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Spartan – Engine Cylinder Head; Chev 2.0 13-15 LTG Head (Part No.2CAD)

Engine Cylinder Head; Chev 2.0 13-15 LTG Head

from

$868.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Most Sold 2020 Buick Envision Engine Timing Parts

Explore our best-selling Buick parts for the 2020 Envision among 17 OEM and aftermarket options starting from $17.99.

ACDelco – Intake Variable Valve Timing (VVT) Solenoid (Part No.12662736)

Intake Variable Valve Timing (VVT) Solenoid

from

$61.99
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Coated to help protect against premature corrosion
  • Designed to match OEM calibration to provide the performance you expect from GM
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – Exhaust Variable Valve Timing (VVT) Solenoid (Part No.12662737)

Exhaust Variable Valve Timing (VVT) Solenoid

from

$59.99
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Coated to help protect against premature corrosion
  • Designed to match OEM calibration to provide the performance you expect from GM
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1044)

Engine Variable Valve Timing (VVT) Solenoid

from

$49.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1009)

Engine Variable Valve Timing (VVT) Solenoid

from

$47.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – 12662736 GM Original Equipment Intake Variable Valve Timing (VVT) Solenoid (Part No.A5132811476ACD)

12662736 GM Original Equipment Intake Variable Valve Timing (VVT) Solenoid

from

$68.56
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and fuel economy. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Coated to protect against premature corrosion
  • Designed to match OEM calibration to provide the performance you expect from GM
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 154 Links, Timing/Balance Shaft Components, With Sprockets (Part No.9-0918S)

Primary Timing Chain Kit: Exact Fit, 154 Links, Timing/Balance Shaft Components, With Sprockets

from

$229.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

ACDelco – Camshaft Position Actuator (Part No.25203205)

Camshaft Position Actuator

from

$194.99
ACDelco GM Original Equipment Camshaft Phasers adjust camshaft positioning while your vehicle’s engine is running, and are GM-recommended replacements for your vehicle’s original components. They help ensure the camshaft rotates in the correct timing with other valve train components to provide optimal engine performance, and work with your vehicle’s variable valve timing solenoid to help maximize drive quality and fuel economy. These original equipment phasers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Helps ensure optimal camshaft positioning
  • Works alongside your vehicle’s VVT solenoid to help maximize drive quality and fuel economy
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 154 Links, Timing/Balance Shaft Components, Without Sprockets (Part No.9-0918SX)

Primary Timing Chain Kit: Exact Fit, 154 Links, Timing/Balance Shaft Components, Without Sprockets

from

$187.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 154 Links, Timing Components, With Sprockets (Part No.9-0918SA)

Primary Timing Chain Kit: Exact Fit, 154 Links, Timing Components, With Sprockets

from

$152.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Worldpac – TIMING CHAIN TENSION (Part No.A5110499026ACD)

TIMING CHAIN TENSION

from

$72.60
TIMING CHAIN TENSION

NTK – EN VAR TIME SOLENOID (Part No.VV0145)

EN VAR TIME SOLENOID

from

$69.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

Cloyes Gear – Balance Shaft Timing Chain Kit: Exact Fit, 66 Links, Balance Shaft Components, With Sprockets (Part No.9-0919S)

Balance Shaft Timing Chain Kit: Exact Fit, 66 Links, Balance Shaft Components, With Sprockets

from

$67.99
Designed for the replacement of worn or damaged balance shaft chains, tensioners, and guides, Balance Shaft Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

NTK – EN VAR TIME SOLENOID (Part No.VV0144)

EN VAR TIME SOLENOID

from

$66.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

ACDelco – 12662737 GM Original Equipment Exhaust Variable Valve Timing (VVT) Solenoid (Part No.A5132811478ACD)

12662737 GM Original Equipment Exhaust Variable Valve Timing (VVT) Solenoid

from

$66.47
ACDelco GM Original Equipment Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and fuel economy. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Coated to protect against premature corrosion
  • Designed to match OEM calibration to provide the performance you expect from GM
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

WSO – Camshaft Solenoid Ad (Part No.A5132811476WSO)

Camshaft Solenoid Ad

from

$57.98
Camshaft Solenoid Ad

Dorman – Variable Valve Timing Solenoid (Part No.916-935)

Variable Valve Timing Solenoid

from

$44.49
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Cloyes Gear – Engine Balance Shaft Chain (Part No.C919)

Engine Balance Shaft Chain

from

$17.99
Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Refer to our online catalog for detailed application-specific information
  • Keep your engine’s valvetrain in perfect time with Cloyes, the world leader in timing drive systems
See More

Top-Rated Engine Parts Brands For Your 2020 Buick Envision

Shop for the best-rated brands offering Engine Parts and other products for your 2020 Buick Envisions. Below you’ll find some of our best rated Engine Parts from ACDelco, and more. Engine Parts from these brands that fit a 2020 Envision start at just $8.34 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular ACDelco 2020 Buick Envision Engine Parts

When it comes to maintaining or upgrading your 2020 Buick Envision, using quality Engine Parts is essential to ensure durability and a perfect fit. ACDelco ticks all of those boxes. We offer a wide selection of ACDelco Engine Parts, specifically designed for the 2020 Buick Envision. With over 15 ACDelco brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.34, with an average price of just $50.98. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our ACDelco Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Crankshaft Position Sensor
from
$69.99
This product is not rated

Engine Crankshaft Position Sensor

“”

Engine Camshaft Position Sensor
from
$59.99
This product is not rated

Engine Camshaft Position Sensor

“”

Valve Cover Gasket
from
$16.8
This product is not rated

Valve Cover Gasket

“”

FAQs for 2020 Buick Envision Engine Parts

Which Engine Parts are best-sellers for 2020 Buick Envisions?

Out of 65 Engine Parts that fit 2020 Buick Envisions, the following parts are the top sellers:

What’s the price range for 2020 Buick Envision Engine Parts?

Engine Part prices for the 2020 Buick Envision start at $4.49 and go up to $868.99 for the most premium parts.

What’s the average price of a Engine Part for a 2020 Buick Envision?

The average price for Engine Parts for the 2020 Buick Envision is $63.94. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Buick Envision model years?

Yes, we currently carry Engine Parts for 7 model years of Buick Envisions between 2016 and 2023. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2019, 2018, 2017, 2016, and 2023.

What are the cheapest Engine Parts for my 2020 Buick Envision?

The cheapest 2020 Buick Envision Engine Parts we carry in stock are:

What types of Engine Parts do you sell for my 2020 Buick Envision?

Can I get help with 2020 Buick Envision Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Engine Parts and more.

What is your return policy for Buick Envision Engine Parts?

Advance Auto Parts keeps returns simple. For new Buick Envision Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.