from

$14.84

Water Pump Gasket

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$26.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$63.15

Oil Temperature Send

from

$87.99

Engine Coolant Temperature Sensor

from

$29.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$3.79

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$27.99

Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$30.49

Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$25.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$29.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$21.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$35.97

The Vaico Expansion Tank Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$163.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$84.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$85.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable
Coated with corrosion and rust inhibitor
100% leak tested
All-in-one bolt on solution for a complete repair
Includes quality thermostat

from

$74.99

Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. These assemblies are designed to meet or exceed the OE materials used. Rein thermostat housings are constructed of metal or plastic based on vehicle specific factory requirements. The housings are constructed from molds cast directly from the OEM parts to meet the strict tolerances of the vehicle’s factory specifications. This ensures a smooth and easy installation, just as one would expect to find with OE quality. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the profession repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

Matches original equipment design specifications.
Direct fitments allows easy installation.
Manufactured to strict engineering standards/specifications in materials and tolerances.
Thermostat set to 97 degrees Celsius to maintain optimal running temperature.

from

$112.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$148.07

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$141.77

Wahler is a provider of premium quality thermostats and thermo-switches in OE quality. The varying applications and divergent technologies of the internal combustion engine call for thermostats featuring different operating characteristics and modes of operation. Therefore Wahler provides thermostats with a highly accurate coolant control.

Product Features:

Strict quality control, and functional testing
Self-cleaning and self-aligning thermostat valve
Original equipment design provides exact fit and performance
Precise sealing edges reduce leakage and premature cooling
Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
Stainless steel assembly and springs are engineered for long life

2020 BMW X6 Engine Cooling Parts

More 2020 BMW X6 Engine Cooling Parts

Essential 2020 BMW X6 Engine Cooling Parts

Elring – Water Pump Gasket (Part No.G3040314647ELR)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1038)

Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA2276)

NTK – Engine Coolant Temperature Sensor (Part No.EF0086)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

MAHLE Original – Engine Coolant Thermostat Housing Gasket (Part No.C32504)

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.41-77548-00)

Carquest Premium – Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T64)

Carquest Premium – Coolant Reservoir Cap: T65, Threaded, Direct Fit, Provides Tight Seal, 1 Pack (Part No.T65)

Motorad – Radiator Cap: 20 PSI (Part No.T-64)

Motorad – Radiator Cap: 30 PSI (Part No.T-65)

Rein – Cap-Expansion Tank (Part No.CPE0034)

Vaico – Expansion Tank Cap (Part No.G1040453566VCO)

Dorman – Thermostat Assembly: Includes Sensor, Housing, Thermostat, and Bolt, 217 Degrees (Part No.902-5155)

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)

Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85956)

Rein – Thermostat Assembly 97C (Part No.CTA0029)

Motorad – Integrated Thermostat Housing: With Seal, 221 Degrees (Part No.986-221)

Mahle – Thermostat Assembly (Part No.G4002279669MAH)

Wahler – Wahler Thermostat Assembly (Part No.G4002384376WAH)

Popular 2020 BMW X6 Engine Cooling Parts Categories

2020 BMW X6 Engine Cooling Parts

Engine Cooling Parts Brands To Make Your 2020 BMW X6 Last

Popular MAHLE Original Engine Cooling Parts

Top 2020 BMW X6 Engine Cooling Parts from Permatex

FAQs for 2020 BMW X6 Engine Cooling Parts

What are the most purchased Engine Cooling Parts for the 2020 BMW X6?

More Popular Parts for All Makes