2020 Audi A3 Suspension Parts

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and a direct fit application.
• Meets or exceeds the OE specifications.
• Designed to reduce vibration and absorb noise.

Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant ‘toe in’ under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti-lift geometry and neutralised bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.

Product Features:

• Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
• Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Lasts from 3 to 10 Times Longer
• Assemble to Chassis Same Way as OEM
• Maintains Factory Ride Characteristics
• Simple Way to Increase Vehicle Height

Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Lasts from 3 to 10 Times Longer
• Assemble to Chassis Same Way as OEM
• Maintains Factory Ride Characteristics
• Simple Way to Increase Vehicle Height

The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

Sway Bar Link Bolt

These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with -0.3deg camber and +2.5deg caster improvements into these arms to optimise wheel alignments settings for track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. Whiteline’s rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced ‘toe-change’ during hard cornering, creating impressive (more…)

Product Features:

• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Construction and design validated by MOOG engineers
• Broad coverage for foreign and domestic applications

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with -0.3deg camber and +2.0deg caster improvements into these arms to optimise wheel alignments settings for street and track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. Whiteline’s rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high quality sealed bearing assembly permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic improvements to steering precision, most noticeably reduced ‘toe-change’ during hard cornering, creating (more…)

Product Features:

• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

• Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
• Control arms utilize robot welding for consistent performance and quality
• Delphi machines the ball studs to Micron tolerances to guarantee durability and smooth Joint operation
• Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

Sway Bar Link Nut

Sway Bar Link Nut

Sway Bar Link Nut

Strut Mount

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

• Manufactured to strict engineering standards/specifications in materials and tolerances
• Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
• High corrosion resistance

The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Pivot for the steering mechanism, providing a smooth steering response
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

Strut Mount

MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:

• High polish chrome steel bearing races
• Replacement helps restore vehicle handling
• Superior rubber to steel bonding for durability
• Engineered to meet or exceed OE requirements
• Provides like-new steering ease of installation and longer life
• Incorporates proven design and engineering features

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity