2019 Kia Sedona Cooling and Climate Controls

Below you will find various in-demand Kia Cooling and Climate Controls, components and accessories for your 2019 Sedona. Advance Auto Parts has popular Sedona parts like Blend Doors, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Sedona model years including 2011, 2012, 2014, 2015, 2016, 2017, 2018, 2020, 2021 and more. Select a category of 2019 Kia Sedona Cooling and Climate Controls below and start saving instantly.

Popular 2019 Kia Sedona Cooling and Climate Controls Categories

Water Pump Housing Gaskets

AC Compressor Without Clutch

Thermostats

Heater Blend Door Control Motors

Air Blend Door Actuators

Coolant Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Engine Coolant Pipe O-Rings

Blower Motor Resistors

Accumulator and Receiver Driers

ABS Speed Sensors

Thermostat and Water Outlet Gaskets

Temperature Switch and Senders

Blower Motor Resistor Connectors

Water Pump Gaskets

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

Engine Coolant Outlet Seals

AC Refrigerant Pressure Sensors

Radiator Cap Adapters

Water Pump O-Rings

Essential Cooling and Climate Controls for 2019 Kia Sedonas

from

$101.35

A/C Pressure Switch

from

$249.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle┐s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
Our included “multi-fit” attachments allow one radiator to cover multiple vehicle applications without sacrificing OE fit. This results in wider vehicle coverage with substantially less inventory.

from

$43.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$27.65

The Vemo Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$111.29

The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$13.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$19.99

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$3.62

Water Outlet O-Ring

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$118.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$26.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$45.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$53.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$18.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$85.99

HL Mando is a globally recognized as OE supplier and has been offering the HVAC solutions for Korean vehicles around the globe. HL Mando product is the same unit as OEM manufactured part that your vehicle was born with and guaranteed to be a direct replacement and true OEM part. Take an advantage with Mando product!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$7.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$132.99

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$87.72

Air Flap Actuator

from

$17.79

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$298.99

HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of A/C Compressor with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!

Product Features:

Pre-filled oil in it with the correct amount of oil
Tested for Quality, Durability, and Reliability
Brand New OE- No Core Exchange Required
Direct Original Equipment Replacement

from

$387.78

Halla manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

Brand new with no remanufactured parts.
OE-Equivalent and Direct fit Application.
Equipped with a new clutch assembly.
Includes installation instructions and all necessary fitment components.

from

$372.99

New Standard Replacement A/C Compressor, HS18, 6 Groove

Product Features:

HS18, 6 Groove
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$274.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

Upgrade your 2019 Kia Sedona with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2019 Kia Sedona, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Kia or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Sedona functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Cooling and Climate Controls for the 2019 Kia Sedona, designed to meet your needs without breaking the bank. From Blend Door replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2019 Kia Sedona at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.79 to $557.41, with an average price of $78.87. Our 50 Cooling and Climate Controls in stock come from 19 trusted brands, so you’re sure to find the right part for your 2019 Kia Sedona without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2019 Kia Sedona, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, FELPRO, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $1.79, and at an average 5 stars rating. With 2,212 customer reviews and counting, our 2019 Kia Sedona Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2019 Kia Sedona is always ready to roll. We’re committed to providing you with everything you need to keep your Sedona in top shape, all in one place. Start shopping confidently below for your 2019 Kia Sedona!

Best-Selling Blend Doors for 2019 Kia Sedonas

Enhance the driving experience in your Kia with 3 quality Blend Door components, starting at $53.99.

show more show less

from

$53.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$87.72

Air Flap Actuator

from

$91.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Top Picks for 2019 Kia Sedona Engine Cooling Parts

Upgrade Kia Sedonas with top-quality Engine Cooling Parts parts, including 27 OEM and aftermarket selections for your 2019 model.

show more show less

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$13.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$4.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$30.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$88.99

Carquest Premium drive motor inverter cooler water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

Built to meet or exceed OE fit, form and function
All components necessary for installation are supplied with pump
100% tested for reliable performance
Follow all enclosed instructions to maximize pump life and validate warranty

from

$27.65

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$38.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$1.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$27.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$7.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$4.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$17.79

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$14.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$111.29

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$182.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$29.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$22.99

This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.04

Radiator Cap

from

$7.49

WATER TEMP. SENSOR

from

$4.62

Water Outlet Gasket

from

$3.62

Water Outlet O-Ring

from

$2.75

Water Pump Gasket

In-Demand Blower Motor and Related Products for 2019 Kia Sedonas

Select from 10 premium Blower Motor and Related Products parts for your 2019 Kia Sedona, with prices ranging from $39.99 to $155.99.

show more show less

from

$119.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$60.99

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

from

$60.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$39.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$85.99

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$155.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$149.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$118.99

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$85.57

Blower Motor Resisto

from

$55.99

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

Top-Rated Cooling and Climate Controls Brands For Your 2019 Kia Sedona

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2019 Kia Sedonas. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2019 Sedona start at just $1.79 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2019 Kia Sedona Cooling and Climate Controls

When it comes to maintaining or upgrading your 2019 Kia Sedona, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2019 Kia Sedona. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Popular FELPRO 2019 Kia Sedona Cooling and Climate Controls

FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2019 Kia Sedona owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2019 Sedona, Advance Auto Parts carries a full inventory of 7 FELPRO Cooling and Climate Controls. Plus you will be keeping your Kia in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range from $1.79 to $14.99, plus, with more than 3 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$7.79

This product is not rated

Engine Coolant Outlet Gasket

“”

from
$6.49

This product is not rated

Engine Coolant Thermostat Housing Gasket

“”

from
$1.79

This product is not rated

Engine Water Pump Gasket

“”

FAQs for 2019 Kia Sedona Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2019 Kia Sedonas?

Out of 50 Cooling and Climate Controls that fit 2019 Kia Sedonas, the following parts are the top sellers:

Radiator Cap: 16 PSI (17110021) – $13.99
Radiator Cap: 16 PSI (17110039) – $21.99
Blower Motor: With Wheel (10441413) – $119.99

What’s the price range for 2019 Kia Sedona Cooling and Climate Controls?

Cooling and Climate Control prices for the 2019 Kia Sedona start at $1.79 and go up to $557.41 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2019 Kia Sedona?

The average price for Cooling and Climate Controls for the 2019 Kia Sedona is $78.87. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Kia Sedona model years?

Yes, we currently carry Cooling and Climate Controls for 18 model years of Kia Sedonas between 2002 and 2021. Cooling and Climate Controls are bought most frequently for the following model years: 2021, 2020, 2018, 2017, 2016, 2015, 2014, 2012, and 2011.

What are the cheapest Cooling and Climate Controls for my 2019 Kia Sedona?

The cheapest 2019 Kia Sedona Cooling and Climate Controls we carry in stock are:

Engine Water Pump Gasket (10018031) – $1.79
Water Pump Gasket (12053307) – $2.75
Water Outlet O-Ring (11924403) – $3.62
Engine Coolant Outlet Gasket (10081700) – $4.29
Water Outlet Gasket (12591998) – $4.62

What are the top-rated Cooling and Climate Controls that fit the 2019 Kia Sedona?

Out of 2,212 reviews by customers, our 2019 Kia Sedona Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2019 Kia Sedona and their top-rated products:

Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
- Engine Coolant Outlet Gasket (10568168) – $4.99
Blend Doors
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
- Engine Coolant Outlet Gasket (10568168) – $4.99
Blower Motor and Related Products
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
- Engine Coolant Outlet Gasket (10568168) – $4.99

What types of Cooling and Climate Controls do you sell for my 2019 Kia Sedona?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2019 Kia Sedona:

Can I get help with 2019 Kia Sedona Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Kia Cooling and Climate Controls and more.

What is your return policy for Kia Sedona Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Kia Sedona Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2019 Kia Sedona Cooling and Climate Controls

Santech – A/C Pressure Switch (Part No.R1054414178SII)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813393)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1156)

Vemo – Engine Coolant Temperature Sensor (Part No.C6020109494VMO)

AISIN – OE Replacement Water Pump (Part No.G3000378322ASC)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Felpro – Engine Coolant Outlet Gasket (Part No.35959)

Carquest Premium – Standard Thermostat: 180 Degrees (Part No.14128)

Original Equipment – Water Outlet O-Ring (Part No.G3046285225OEA)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1746)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1089)

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

Carquest Premium – A/C Desiccant Bag (Part No.T83004)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-309)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Carquest Premium – A/C Block Expansion Valve (Part No.T39541)

MANDO – New Blower Motor Original Equipment (Part No.32A1016)

Felpro – Engine Water Pump Gasket (Part No.35903)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2691)

Felpro – Engine Coolant Outlet Gasket (Part No.35894)

Original Equipment – Air Flap Actuator (Part No.R2046754918OEA)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

MANDO – New AC Compressor Original Equipment (Pre-filled Oil) (Part No.10A1020)

Halla – A/C Compressor w/ Clutch, New (Part No.R1000323696HAL)

KAI – A/C Compressor (Part No.ACP010621)

Carquest Standard – Reman Ford HS20 Compressor w/ Clutch (Part No.DW67120)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-309)

Original Equipment – Air Flap Actuator (Part No.R2046754918OEA)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-325)

Carquest Premium – A/C Desiccant Bag (Part No.T83004)

MANDO – New AC Compressor Original Equipment (Pre-filled Oil) (Part No.10A1446)

Halla – A/C Compressor (Part No.R10001355413HAL)

Carquest Premium – New Compressor with Clutch, Halla VS18E (Part No.T168308)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2691)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1746)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2145)

Santech – A/C Pressure Switch (Part No.R1054414178SII)

Behr – Drier Desiccant Element (Part No.R1043314775BEH)

Carquest Premium – A/C Block Expansion Valve (Part No.T39561)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Felpro – Engine Coolant Outlet Gasket (Part No.35959)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.15188)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T4193)

Vemo – Engine Coolant Temperature Sensor (Part No.C6020109494VMO)

Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1019)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35933)

Felpro – Engine Water Pump Gasket (Part No.35896)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10326)

Felpro – Engine Coolant Outlet Gasket (Part No.35868)

Felpro – Engine Coolant Outlet Gasket (Part No.35870)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Felpro – Engine Water Pump Gasket (Part No.35935)

AISIN – OE Replacement Water Pump (Part No.G3000378322ASC)

Felpro – Engine Coolant Outlet Gasket (Part No.35894)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813508)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Motorad – Standard Thermostat: With Seal, 192 Degrees (Part No.635-192)

Dorman – Help – Radiator Cap (Part No.54237)

Autopart International Inc – Radiator Cap (Part No.G10101995143API)

Worldpac – WATER TEMP. SENSOR (Part No.C6020109494MRL)

Mahle – Water Outlet Gasket (Part No.G30451872983MAH)

Original Equipment – Water Outlet O-Ring (Part No.G3046285225OEA)

Ishino Stone – Water Pump Gasket (Part No.G3040252684ISH)

Carquest Premium – Blower Motor: With Wheel (Part No.75867)

Carquest – HVAC Blower Motor Resistor (Part No.RU1346)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1057)

Carquest Premium – Brake Light Switch Connector (Part No.PTC1134)

MANDO – New Blower Motor Original Equipment (Part No.32A1016)

Carquest Premium – Blower Motor: With Wheel (Part No.75145)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1498)

Dorman – BMR (Part No.984-578)

ACKOJA – Blower Motor Resisto (Part No.R2032301525ACK)

Dorman – BMR (Part No.973-178)