2019 Jeep Wrangler Front Bumpers

Westins WJ2 Full Width Front Bumper with LED Light Bar Mount is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The product is designed to utilize both styles of factory fog lights or round post lights, and adjustable brackets accept Westin or competitor light bars. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Full Width Front Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. The product is designed to utilize both styles of factory fog lights or round post lights. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Stubby Bumper with Bull Bar is constructed with 3/16-inch plate steel and fits most double or single row 20 light bars. The Bull Bar on our new WJ2 Stubby Bumper is designed to mount and protect your light bar. With our new WJ2 bumper product, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper, 2 side and 2 front off-road jack points, and holes to hide light harness wires. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Full Width Front Bumper is constructed with 3/16-inch plate steel. With Westins new WJ2 Full Width Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! It is designed to utilize both styles of factory fog lights or round post lights. Features Rock Light mount points on lower bumper corners, holes to hide light harness wires, and 2 front off-road jack points. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

Westins WJ2 Stubby Bumper with LED Light Bar Mount is constructed with 3/16-inch plate steel and features a stout LED light bar mount that accommodates a 20 single row light bar. With Westins new WJ2 Stubby Bumper, your winch fits inside the bumper to allow maximum air flow to your vehicles radiator and is designed to allow winch installation with your bumper already installed – most other brands wont! Bumper features Rock Light mount points on the lower corners of the bumper as well as 2 side and 2 front off-road jack points. Adjustable brackets accept Westin or competitor light bars. Product offers recovery hooks with a recovery shackle mount point to allow easy tow strap attachment. Optional skid plate and light bars both sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep JL / JT, this bumper also comes with a stinger-style angular brush guard. The TrailCrusher bumper is fast and easy to install, integrating with the Jeep Wrangler JL or Jeep Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Angular brush guard helps protect the winch and adds an aggressive look
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation

Westins Rear Bumper is constructed with 3/16-inch plate steel. This clean, stylish bumper is designed to work with factory or Westin hitches and features a bottom frame mount that prevents the bumper from rotating. Our Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Includes 2 off-road jack points. Product includes bumper, mounting hardware and install instructions.

Product Features:

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

The ARIES TrailCrusher Jeep bumper is constructed to outmatch every other bumper in its class. With heavy-duty, welded steel construction, it is a highly functional companion on the trail, featuring a winch and shackle rating of 12,500 lbs. The TrailCrusher bumper is available for the front and rear, and it installs with no drilling required. Everything about the TrailCrusher Jeep bumper is designed to maximize its strength and utility. It is built with 3/16″ thick all-steel plates, welded together in a stout, high-strength configuration. It also features 1/4″ thick welded shoulder sleeves that add even more strength, particularly to the shackle mounts. Not only does the TrailCrusher bumper provide a 12,500-lb. winch and shackle rating, but it also offers excellent versatility. The winch platform of the bumper features industry-standard mounting holes to accept most types of winches, and the shackle mounts accept any pin up to 7/8″ in diameter. ARIES forged steel shackles #2166071 offer a perfect fit and a work load limit to match the 12.5K rating. A number of winch accessories are also available, including a hawse fairlead #2156070 and roller fairlead #2156071. For added winch protection and an aggressive look on the Jeep Wrangler JL or Jeep Gladiator, this bumper is also compatible with the stinger-style angular brush guard #2156050 (not included). The TrailCrusher bumper is fast and easy to install, integrating with the Jeep JL or Gladiator like a stock bumper. It uses pre-existing holes in the vehicle frame to eliminate drilling from the install process, and it mounts with 3/8″ steel brackets for added strength. To be ready for whatever the trail has in store, both the front and rear TrailCrusher bumpers come an E-coat and carbide black powder-coated finish, maximizing rust and scratch resistance. Each comes with all necessary mounting hardware for a complete installation (see application info to verify fitment with your Jeep).

Product Features:

• Winch and shackle ratings of 12,500 lbs. for ultimate off-road functionality
• Standard winch mounting platform accepts most types of winches
• Welded shackle mounts and 1/4″ thick sleeves provide reliable anchoring points
• Shackle mounts accept pins up to 7/8″ in diameter (#2166071 recommended)
• No-drill install uses factory mounting points with no pump relocation required
• One-piece construction with 3/16″ thick, all-steel plates for maximum strength
• Narrow width and high ground clearance for an improved off-road-style design
• Highly durable carbide black powder coat with rust-resistant E-coat finish
• Accepts angular brush guard #2156050 for added winch protection
• Center round cutouts accept OE bumper lights
• Includes mounting hardware and 3/8″ thick brackets for solid installation