2019 Hyundai Tucson Fuel and Emissions Systems
More 2019 Hyundai Tucson Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2019 Hyundai Tucson, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2019 Hyundai Tucson Fuel and Emissions Systems
Vemo – MAP Sensor (Part No.C7044339761VMO)
from
$80.02
Vemo Manifold Absolute Pressure/Manifold Air Temperature Sensors are designed to perform in harsh environments such as extreme temperatures and vibration, thermal and mechanical shock. Acts as an input to the ECU to correct fuel delivery in response to changing atmospheric pressure.
Product Features:
See More
Product Features:
- Designed for under-hood environments
- All-silicon, solid-state microelectronic technology
- Temperature compensation
- Electromagnetic interference (EMI) protection
- Air temperature output
FAE – MAP Sensor (Part No.C7044256260FAE)
from
$106.42
The FAE MAP sensor, absolute pressure of admission, detects the air pressure at the inlet of the vehicle and turns it into an electrical signal which is sent to the engine’s electronic control unit (ECU) in order to regulate the stoichiometric mixture. Some models do have a NTC type temperature sensor that allows the MAP to detect, not only the pressure, but also the air temperature at the inlet. This information is necessary for the ECU to calculate the mass of intake air in order to be able to adjust the air-fuel mixture. The sensor element of the MAP is a piezoresistive type configured as a Wheatstone bridge, – its electrical resistance varies according to the mechanical de- formation of a membrane.
Product Features:
See More
Product Features:
- The sensor element is integrated in a MEMS-type DIE which amplifies, performs a thermal compensation and conditions the signal
- The incorporated digital electronics allow us to program the output signal
- The DIE is mounted on a ceramic circuit and its electrical connections are made by bonding
- Protected with a receptacle and a silicone gel
- The electronic circuit is achieved through hybrid technology and is handled in a clean room due to its sensitive nature.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1275)
from
$52.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPC1028)
from
$52.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Motorad – Tethered Fuel Cap (Part No.MGC837T)
from
$25.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Come pre-assembled for quick and easy installation.
- Several fastener options to work with any fuel cap compartment configuration
- Fits vehicles orginally equipped with tether
- Reduces air pollution with proper sealing and venting
- Manufactured from durable, long-life materials
Carquest Premium – Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10508)
from
$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Bosch – Oxygen Sensor: 4 Wire, 23.62" Long, Heated, Exact Fit (Part No.18043)
from
$107.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
NTK – Switching Oxygen Sensor: 4 Wire, 17.25" Long, Heated, Direct Fit (Part No.25202)
from
$115.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Wideband Oxygen Sensor: 4 Wire, 22.91" Long, Heated, Exact Fit (Part No.16754)
from
$136.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Bosch – Turbine Electric Fuel Pump (Part No.E3000418631BOS)
from
$150.37
Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.
Product Features:
See More
Product Features:
- OE-Equivalent Direct fit for easy installation.
- OE connections and fittings.
- Superior turbine pump design that virtually eliminates fuel pulsation.
- Precision, spin-balanced armature to reduce noise and vibration.
- Premium carbon brushes, utilizing advanced materials.
- Noise suppression coil that eliminates radio frequency interference.
- Illustrated step-by-step instructions are included.
Carquest Premium – Fuel Pump Module Assembly M2542493: Fuel Pump, Sending Unit and Strainer (Part No.M2542493)
from
$825.99
Carquest Premium fuel pump modules and assemblies are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Pump Module Assembly (Part No.E8678M)
from
$271.99
CARQUEST fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every CARQUEST Fuel Pump to deliver greater reliability.
Product Features:
See More
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Triple barb hose fitting provides superior, long-lasting seal
- Superior return porting for optimum fuel flow
- Enhanced pump to flange harness design provides worry-free electrical performance
- Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
- Gradient density, dual zone filtration designed for better contamination resistance
Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10060)
from
$1448.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10051)
from
$981.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
- Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
- Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
- Meets OE specifications
Delphi – Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness (Part No.HM10054)
from
$1022.99
Direct Injection High Pressure Fuel Pump: Without Gasket/Seal or Wiring Harness
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1336)
from
$47.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1353)
from
$67.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1962)
from
$141.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 15.8" Long, Heated, Direct Fit (Part No.24325)
from
$118.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015689973ND)
from
$128.70
DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.
Product Features:
See More
Product Features:
- Tarnish-proof platinum electrodes provides longer life and maintains accuracy
- Quick-response planar zirconia element can quickly detect oxygen concentration
- Measures A/F ratios from approximately 12:1 to 19:1
- Increased performance by mapping a/f ratios throughout rpm range
- Reduces emissions by keeping the air-fuel mixture at an optimum ratio
DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 26.93" Long, Heated, Exact Fit (Part No.234-5044)
from
$205.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – First Time Fit Oxygen Sensor (Part No.C5010340915ND)
from
$102.87
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Santech – Relay (Part No.P2020947900SII)
from
$12.36
Relay
Carquest Premium – Multi Purpose Relay (Part No.RAA1954)
from
$19.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Popular 2019 Hyundai Tucson Fuel and Emissions Systems Categories
2019 Hyundai Tucson Fuel and Emissions Systems
You count on your 2019 Hyundai Tucson to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 27 Fuel and Emissions Systems ranging in price from $12.36 to $981.99, you’re sure to find everything you need for your 2019 Hyundai Tucson.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 9 different brands like Carquest Premium, Motorad, and Delphi. 2019 Hyundai Tucson Fuel and Emissions Systems start as low as $12.36!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 900 extensive product reviews on 2019 Hyundai Tucson Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2019 Hyundai Tucson below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2019 Hyundai Tucson
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2019 Hyundai Tucson running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Delphi, and even more.
Popular Carquest Premium Fuel and Emissions Systems
You’ll find popular Carquest Premium brand products across Gas Caps. All are waiting to get your 2019 Hyundai Tucson back on the road. Some of the top-rated Carquest Premium products in these categories are:
from
$24.99
(68)
Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 2019 Hyundai Tucson, and some of our most reviewed parts include:
FAQs for 2019 Hyundai Tucson Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2019 Hyundai Tucson?
Out of 27 Fuel and Emissions Systems for the 2019 Hyundai Tucson, the most popular in our inventory are:
