2019 GMC Terrain Cooling and Climate Controls

Name: AC Pressure Sensor
Brand: Carquest Premium
SKU: ABA1005
Price: 56.99 USD

Below you will find various in-demand GMC Cooling and Climate Controls, components and accessories for your 2019 Terrain. Advance Auto Parts has popular Terrain parts like Engine Cooling Parts, Air Conditioning Parts, Heating Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Terrain model years including 2014, 2015, 2016, 2017, 2018, 2020, 2021, 2022, 2023 and more. Select a category of 2019 GMC Terrain Cooling and Climate Controls below and start saving instantly.

Popular 2019 GMC Terrain Cooling and Climate Controls Categories

Humidity Sensors

Radiators

Water Pumps

AC Compressor With Clutch

Blower Motors

Radiator Caps

Thermostat and Water Outlet Assemblies

Air Blend Door Actuators

Coolant Reservoirs

Coolant Temperature Sensors

Heater Cores

Water Outlets

Blower Motor Resistors

AC Harness Connectors

AC Condensers

HVAC Automatic Temperature Control (ATC) Relays

AC Evaporators

AC Caps and Valve Core Kits

ABS Speed Sensors

Radiator Shutter Assemblies

Radiator Drain Plugs

AC Condenser Screw

AC Refrigerant Pressure Sensors

AC Service Valve Caps

Radiator Cap Adapters

AC Expansion Valve O-Rings

AC Hose Bolt

A/C Service Valve Fitting

Essential Cooling and Climate Controls for 2019 GMC Terrains

from

$56.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each part meets manufacturing specifications before packaging.

from

$626.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Functionally Equivalent to OE Design
Magnetic size and properties compare or exceed OEM
Hermetically Sealed & Thermally Protected Electronics

from

$111.99

This radiator shutter assembly matches the fit and function of the original equipment shutter to restore function to the vehicle’s active grille shutter system. This assembly features a factory-style connector for a plug-and-play installation.

Product Features:

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$8.49

This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$282.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$255.99

An ACDelco Professional, premium aftermarket Engine Water Pump circulates coolant through your vehicle’s radiator and engine system to help maintain proper engine temperature and performance. The gaskets, seals, and O-rings packaged with this Professional, premium aftermarket water pump help guarantee that all necessary parts are available for trouble-free installation. ACDelco Professional Water Pumps are a high quality replacement for many vehicles on the road today. This premium aftermarket replacement engine water pump is manufactured to meet your expectations for fit, form, and function.

Product Features:

All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles
Thoroughly tested for reliable, leak-free performance
Coated seals support seal longevity and durability
Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies
High-quality bearings are permanently sealed and lubricated for greater durability and long life
Come with premium, high-quality replacement components needed for trouble-free and accurate installation
Uniform wall sections and smooth coolant-flow cavities for efficient operation
Cast-iron or aluminum design, depending on vehicle application

from

$177.99

GM Genuine Parts A/C Evaporator Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C evaporator cores are heat exchangers and are located in the HVAC housing, where they cool and dehumidify the cabin air. Refrigerant is metered into the evaporator by the orifice tube or expansion valve. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Channel-plate construction provides a high refrigerant contact surface area, resulting in better performance
Vacuum-brazed, corrosion-treated, and leak-tested
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$102.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$146.99

This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$76.99

The ABS or Anti-Lock Brake System ECU monitors the Wheel Speed Sensors rotational speed for anti-lock brake function, stability control and traction control. The ABS sensors report the speed of all four wheels to the ECU to determine if the wheels are locking up and to help provide safer stopping. Reasons for replacement include: ABS/brake lamp illumination, no or erratic ABS operation or problems with stability and or traction control systems.

Product Features:

OE MATCHED: Manufactured to OE performance standards. Connectors, mounts and wire lengths are exact match to OE for worry free installation.
INSTALLATION AND SUPPORT: Includes all necessary brackets and hardware. Application specific harness length
THE DIFFERENCE: Glass reinforced plastic for better contamination resistance. Weather pack connectors prevent dirt and moisture contamination. Grease, mounting nut and instruction sheet included where applicable.

from

$100.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$9.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$40.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$30.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.79

GM Genuine Parts Rubber-Bonded Sealing Washers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$129.99

Manufactured to the highest OEM quality standards by an OE Supplier, using proprietary material to stand up to even the most demanding automotive cooling systems. Thermal shock validated and 100% leak tested.

Product Features:

Easy, one step fit and installation
No special tools required
Meets or exceeds all OEM standards

from

$438.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$95.99

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$4.99

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$18.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$14.99

GM Genuine Parts A/C System Valve Cores are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These A/C system valve cores are components of the A/C service valve through which your vehicle’s refrigerant can be accessed and serviced. The valve core is a spring-loaded poppet valve that is opened when the service technician connects the A/C service machine hose couplers. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Repair leaking A/C system, restore A/C function
Helps restore A/C Function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$24.99

New Platinum Pro Coolant Recovery Tank, Without Cap

Product Features:

Without Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$119.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$114.99

GM Genuine Parts Multi Purpose Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems – aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$44.99

GM Genuine Parts A/C Service Valve Fittings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$228.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

Upgrade your 2019 GMC Terrain with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2019 GMC Terrain, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Terrain functioning at its best. At Advance Auto Parts, we offer a wide selection of 40 Cooling and Climate Controls for the 2019 GMC Terrain, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2019 GMC Terrain at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.49 to $626.99, with an average price of $103.79. Our 40 Cooling and Climate Controls in stock come from 5 trusted brands, so you’re sure to find the right part for your 2019 GMC Terrain without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2019 GMC Terrain, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like GM Genuine, Carquest Premium, Dorman, and more. GM Genuine Cooling and Climate Controls start at just $14.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Cooling and Climate Controls available starting at $8.49, and at an average 4.4 stars rating. With 155 customer reviews and counting, our 2019 GMC Terrain Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2019 GMC Terrain is always ready to roll. We’re committed to providing you with everything you need to keep your Terrain in top shape, all in one place. Start shopping confidently below for your 2019 GMC Terrain!

Best-Selling Engine Cooling Parts for 2019 GMC Terrains

Enhance the driving experience in your GMC with 22 quality Engine Cooling Part components, starting at $8.49.

show more show less

from

$21.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$131.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$8.49

Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
Durable construction – this part is made of quality materials for a long service life
Saves money – offers original equipment quality at a competitive price
Quality assured – this petcock has undergone virtual testing to assure proper fit and function

from

$95.99

We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:

Meets and/or exceeds OEM standard
Includes quality gasket or O-ring to ensure proper seal (where applicable)
100% virgin resin material to insure durability
100% leak tested
Direct-fit replacement for ease of installation

from

$21.99

ACDelco GM Original Equipment Engine Coolant Temperature Sensors monitor engine temperature, and are GM-recommended replacements for your vehicle’s original components. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing. These original equipment engine coolant temperature sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps keep engine running at proper temperature
Alerts vehicle operator of high engine temperature conditions
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$109.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$12.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$19.99

Helps keep engine running at proper temperature
Alerts vehicle operator of high engine temperature conditions
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$114.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock outlet on specific General Motors vehicles. It is rigorously tested for reliability, and has convenient features to simplify installation.

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specific Buick, Chevrolet and GMC vehicles
Convenient features – includes sensor, bolts and quick-release clip to easily connect hose using constant-force clamp
Rigorous testing – design underwent as many as 16 functional tests to ensure performance and reliability
Restores operation – fully fixes a cracked or worn original equipment housing that is causing leaks or overheating

from

$9.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$121.99

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$118.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$282.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$236.99

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

26-13/16"L X 21-11/16"W X 7/8"D Core, Crossflow 1Row, Aluminum Core/Plastic Tank

from

$209.99

CSF offers the widest variety of automotive radiator models servicing over 3,200 applications including every brand from Acura to Volkswagen. Whether your radiator is Copper-Brass, Plastic-Copper-Brass, Plastic-Aluminum, or All Aluminum, CSF has you covered with the same materials and style as OE. CSF manufactures the highest quality aftermarket replacement radiators, with the strongest and most efficient components available in the industry. All CSF radiators undergo a rigorous testing process in our state-of-the-art testing lab.

Product Features:

CNC Machined Brackets And Fittings
B Tube Technology
High Performance Multi-Louvered Fin
Racing Style Aluminum Drain Plug
OE Radial And Deep Drawn Aluminum End Tanks
Wind Tunnel, Burst Pressure, And Vibration Testing
Drop In Fitment Requiring No Modifications
1 Hour Hand Polish Mirror Finish
Wind Tunnel Tested For Optimal Radiator Core Cooling Efficiency. Burst Pressure And Impulse Cycle Tested For Strength. Salt Spray Tested For Corrosion Protection

from

$145.99

Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies

from

$111.99

Ideal replacement – this active grille shutter and motor assembly precisely matches the original equipment assembly on specific makes and models
Plug & play installation – this grille shutter assembly is made with a factory-style electrical connector for a trouble-free installation
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and reliable performance

from

$95.99

Machined metal construction
Works with MT-300 pressure tester
Tests coolant caps
Professional quality

from

$74.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part
Ideal solution – engineered for a seamless installation
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$65.99

This replacement engine coolant water outlet is engineered to match the fit and durability of the stock engine coolant water outlet on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant water outlet directly replaces the original water outlet on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement water outlets

from

$25.99

Helps keep engine running at proper temperature
Alerts vehicle operator of high engine temperature conditions
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
OE precision matched thermistor ensuring Carquest sensors match OE output resistances across all temperature positions
O-rings, seals or thread sealant are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Most Popular 2019 GMC Terrain Air Conditioning Parts

Customize your GMC with 13 Air Conditioning Parts products like AC Condensers, AC Compressor With Clutch, and ABS Speed Sensors, all priced under $438.99.

show more show less

from

$14.99

Repair leaking A/C system, restore A/C function
Helps restore A/C Function
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$4.99

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$24.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$30.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$56.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each part meets manufacturing specifications before packaging.

from

$133.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$438.99

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$158.99

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.

from

$44.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$26.49

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Fluorocarbon high-temperature O-ring seals coated with lubricant for easy installation prevents hub contamination.

from

$21.79

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Original equipment parts are designed to work with your GM vehicle safety systems — aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type
GM regularly updates production and service part designs to integrate new materials and technologies

from

$9.99

This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 2019 GMC Terrain Heating Parts

Upgrade GMC Terrains with top-quality Heating Parts parts, including 1 OEM and aftermarket selections for your 2019 model.

show more show less

from

$100.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
Carquest heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

In-Demand Blend Doors for 2019 GMC Terrains

Select from 1 premium Blend Doors parts for your 2019 GMC Terrain.

show more show less

from

$119.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

Most Sold 2019 GMC Terrain Blower Motor and Related Products

Explore our best-selling GMC parts for the 2019 Terrain among 2 OEM and aftermarket options starting from $102.99.

show more show less

from

$102.99

This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
Complete kit – each kit comes with a resistor and harness pigtail, which is essential for most repairs
Restores functionality – made to perform like original equipment to restore full HVAC operation
Trustworthy quality – backed by team of engineers and quality specialists in the USA

from

$626.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor
Functionally Equivalent to OE Design
Magnetic size and properties compare or exceed OEM
Hermetically Sealed & Thermally Protected Electronics

Top-Rated Cooling and Climate Controls Brands For Your 2019 GMC Terrain

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2019 GMC Terrains. Below you’ll find some of our best rated Cooling and Climate Controls from GM Genuine, Carquest Premium, and Dorman, and more. Cooling and Climate Controls from these brands that fit a 2019 Terrain start at just $8.49 and are rated as high as 4.5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular GM Genuine 2019 GMC Terrain Cooling and Climate Controls

When it comes to maintaining or upgrading your 2019 GMC Terrain, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. GM Genuine ticks all of those boxes. We offer a wide selection of GM Genuine Cooling and Climate Controls, specifically designed for the 2019 GMC Terrain. With over 1 GM Genuine brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99. Plus, with over 6 customer reviews and an average rating of 4.5 stars, you can trust that our GM Genuine Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.99

(6)

Air Conditioning System Valve Core

“Goof”

Popular Carquest Premium 2019 GMC Terrain Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2019 GMC Terrain owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2019 Terrain, Advance Auto Parts carries a full inventory of 2 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your GMC in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $21.99 to $131.99, plus, with more than 7 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from $21.99

(6)

Radiator Cap: 20 PSI

“Easy to deal with and great products”

from $131.99

(1)

Engine Water Pump: New, Gasket/Seals Included

“So far so good. My car is running great.”

FAQs for 2019 GMC Terrain Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2019 GMC Terrains?

Out of 40 Cooling and Climate Controls that fit 2019 GMC Terrains, the following parts are the top sellers:

Body Bolt – M6-1.0 X 25mm (11910833) – $4.99
Radiator Drain Cocks (89015360) – $8.49
Air Conditioning System Valve Core (15730161) – $14.99

What’s the price range for 2019 GMC Terrain Cooling and Climate Controls?

Cooling and Climate Control prices for the 2019 GMC Terrain start at $1.49 and go up to $626.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2019 GMC Terrain?

The average price for Cooling and Climate Controls for the 2019 GMC Terrain is $103.79. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other GMC Terrain model years?

Yes, we currently carry Cooling and Climate Controls for 14 model years of GMC Terrains between 2010 and 2026. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2019 GMC Terrain?

The cheapest 2019 GMC Terrain Cooling and Climate Controls we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
Body Bolt – M6-1.0 X 25mm (11910833) – $4.99
Radiator Drain Cocks (89015360) – $8.49
Coolant Temperature Sensor 1TS1170 (12423029) – $9.99
Air Conditioning Service Port Caps (50000471) – $9.99

What are the top-rated Cooling and Climate Controls that fit the 2019 GMC Terrain?

Out of 155 reviews by customers, our 2019 GMC Terrain Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2019 GMC Terrain and their top-rated products:

Engine Cooling Parts
- Radiator Cap: 20 PSI (10647381) – $21.99
- Engine Water Pump: New, Gasket/Seals Included (12002251) – $131.99
- Radiator Drain Cocks (89015360) – $8.49

What types of Cooling and Climate Controls do you sell for my 2019 GMC Terrain?

As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2019 GMC Terrain:

Can I get help with 2019 GMC Terrain Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Cooling and Climate Controls and more.

What is your return policy for GMC Terrain Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new GMC Terrain Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2019 GMC Terrain Cooling and Climate Controls

Carquest Premium – AC Pressure Sensor (Part No.ABA1005)

Carquest Premium – Blower Motor: With Wheel (Part No.76516)

Dorman – Active Grille Shutter (Part No.601-444)

Dorman – Help – Radiator Drain Cocks (Part No.61134)

Carquest Premium – Radiator (Part No.4113682)

ACDelco – Water Pump Kit (Part No.252-962)

GM Genuine Parts – Air Conditioning Evaporator Core (Part No.15-63714)

Dorman – Blower Motor Resistor Kit with Harness (Part No.973-401)

Dorman – Thermostat Assembly: Includes Housing, Gasket, Thermostat, and Bolt, 180 Degrees (Part No.902-693)

NTK – ABS Wheel Speed Sensor (Part No.AB0836)

Carquest Premium – Heater Core (Part No.910500)

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10076)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2726)

GM Genuine Parts – Air Conditioning Line O-Ring (Part No.13579649)

Carquest Premium – Coolant Housing/Water Outlet (Part No.CH2009)

Carquest Premium – A/C New, with Clutch, with CVC Compressor (Part No.T198299)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Carquest – Multi-Purpose Relay (Part No.83A1008)

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

KAI – Coolant Reservoir (Part No.GM3014116)

Dorman – HVAC Air Door Actuator (Part No.604-346)

GM Genuine Parts – Multi-Purpose Air Sensor (Part No.23262343)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-51312)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713789)

Carquest Premium – Radiator Cap: 20 PSI (Part No.10271)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2395)

Dorman – Help – Radiator Drain Cocks (Part No.61134)

Carquest Premium – Thermostat Housing: Gasket Included (Part No.86164)

GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.12656444)

Motorad – Integrated Thermostat Housing: With Seal, 195 Degrees (Part No.922-195)

Carquest Premium – Coolant Temperature Sensor 1TS1169 (Part No.WTC1286)

GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.12641073)

Dorman – Engine Coolant Water Outlet (Part No.902-2087)

Carquest Premium – Coolant Temperature Sensor 1TS1170 (Part No.WTC1413)

Dorman – Thermostat Assembly: Includes Housing and Thermostat, 176 Degrees (Part No.902-2124)

Motorad – Integrated Thermostat Housing: 176 Degrees (Part No.993-176)

Carquest Premium – Radiator (Part No.4113682)

Dorman – Active Grille Shutter (Part No.601-513)

CSF Cooling – 26-13/16"L X 21-11/16"W X 7/8"D Core, Crossflow 1Row, Aluminum Core/Plastic Tank (Part No.3866)

Dorman – Thermostat Assembly: Includes Gasket, Thermostat, and Housing, 182 Degrees (Part No.902-2089)

Dorman – Active Grille Shutter (Part No.601-444)

Carquest Premium – Radiator Cap Tester Adapter (Part No.12033)

Dorman – Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-861)

Dorman – Engine Coolant Water Outlet with Sensor (Part No.902-2132)

GM Genuine Parts – Engine Coolant Temperature Sensor (Part No.25186240)

Carquest Premium – Coolant Temperature Sensor 1TS1164 (Part No.WTC1276)

GM Genuine Parts – Air Conditioning System Valve Core (Part No.15-1119)

Dorman – Body Bolt – M6-1.0 X 25mm (Part No.963-232D)

Carquest Premium – Multi-Purpose Relay (Part No.RAA2612)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2726)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

Carquest Premium – AC Pressure Sensor (Part No.ABA1005)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44146)

Carquest Premium – A/C New, with Clutch, with CVC Compressor (Part No.T198299)

Carquest Premium – A/C Condenser (Part No.710082)

GM Genuine Parts – Air Conditioning Service Valve (Part No.15-51312)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4616)

GM Genuine Parts – Air Conditioning Line O-Ring (Part No.13579649)

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Carquest Premium – Heater Core (Part No.910500)

Dorman – HVAC Air Door Actuator (Part No.604-346)

Dorman – Blower Motor Resistor Kit with Harness (Part No.973-401)

Carquest Premium – Blower Motor: With Wheel (Part No.76516)