2019 Chevrolet Blazer Fuel Injectors

Essential 2019 Chevrolet Blazer Fuel Injectors

Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)

GDI SEAL TOOL KIT

from

$119.99
GDI SEAL TOOL KIT

ACDelco – Direct Fuel Injector Assembly (Part No.12662564)

Direct Fuel Injector Assembly

from

$129.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest – Fuel Injector (Part No.57202)

Fuel Injector

from

$119.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

Cardone – Fuel Injector (Part No.2J-107)

Fuel Injector

from

$172.99
CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
  • Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
  • All components are renewed or replaced as necessary to ensure high quality and durability
  • When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
  • Guaranteed fit and function
  • Meets or exceeds O.E.M. performance
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11053)

Remanufactured Diesel Fuel Injector

from

$65.99
CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:
  • Premium OE quality materials
  • Includes copper combustion seal
See More

ACDelco – GM Original Equipment Fuel Injector Assembly (Part No.C1000222637ACD)

GM Original Equipment Fuel Injector Assembly

from

$238.58
The ACDelco GM Original Equipment Fuel Injector is a GM-recommended replacement for your vehicle’s original component. The Fuel Injector is an electro-magnetic valve that meters fuel into the engine’s intake manifold or cylinders for combustion. The engine management computer operates the injector by applying an electric current to the injector solenoid winding – this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. This original equipment fuel injector has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomize fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11043)

Remanufactured Diesel Fuel Injector

from

$66.99
CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:
  • Premium OE quality materials
  • Includes copper combustion seal
See More

ACDelco – Sequential Multi-Port Fuel Injector Assembly (Part No.217-1516)

Sequential Multi-Port Fuel Injector Assembly

from

$156.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11033)

Remanufactured Diesel Fuel Injector

from

$74.99
CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:
  • Premium OE quality materials
  • Includes copper combustion seal
See More

Carquest – Fuel Injector (Part No.57020)

Fuel Injector

from

$105.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

ACDelco – Air Mass Sensor (Part No.B3150575648ACD)

Air Mass Sensor

from

$329.12
An ACDelco Professional Remanufactured Air Mass Sensor is the ideal high quality replacement for your GM vehicle. It is a key part of the engine management system. The Air Mass Sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. Remanufacturing the mass air flow sensor is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear and failure with new components. Damaged and obsolete parts are replaced and are 100% end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing also benefits the environment by returning components back into service rather than processing as scrap or simply disposing of them. This Air Mass Sensor is manufactured to fit your specific GM vehicle and will provide the same performance, durability, and service life you expect from ACDelco.

Product Features:
  • Measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject
  • Undergo the same stringent testing process as the original part
  • Offering the quality, reliability, and durability of OE
  • Manufactured to OE specification for fit, form, and function
See More

Delphi – Mass Air Flow Sensor (Part No.AF10055)

Mass Air Flow Sensor

from

$177.99
100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
  • Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
  • Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
  • All parts are calibrated and tested to match the OE part
  • Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
  • Delphi OE technology validated to match the vehicle applications
See More

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-8309)

Remanufactured Mass Air Flow Sensor

from

$93.99
CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures an d lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:
  • 100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
  • On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
  • All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle¿s engine control management system.
  • Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
  • Components are rated to handle demanding temperature variations for optimum reliability in every environment.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

GM Genuine Parts – Mass Airflow Sensor Kit with Wiring Connector (Part No.213-4527)

Mass Airflow Sensor Kit with Wiring Connector

from

$244.99
GM Genuine Parts Mass Air Flow Sensor Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These kits have the necessary parts you need to replace your vehicle’s mass air flow (MAF) sensor. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Air Mass Sensor (Part No.B3150756035ACD)

GM Original Equipment Air Mass Sensor

from

$171.33
An ACDelco GM Original Equipment Air Mass Sensor is a key part of the engine management system, and is a GM-recommended replacement for your vehicle’s original component. The Air Mass Sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. This original equipment mass air flow sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Measure the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject
  • Undergo the same stringent testing process as the original part
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Spectra Premium – Mass Air Flow Sensor (Part No.MA100)

Mass Air Flow Sensor

from

$107.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:
  • Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
  • Platinum connector threads reduce the number of connection points for faster reaction to change
  • Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
  • Ceramic board provides reliable voltage to eliminate engine rough-idle problems
  • Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
  • Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
  • Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6396)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$89.99
CARQUEST MAF sensors are 100% new and are produced by a certified OEM supplier that designs and manufactures new mass air flow sensors

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Delphi – Delphi Air Mass Sensor (Part No.B3150740797DEL)

Delphi Air Mass Sensor

from

$197.01
All Delphi Air Mass Sensors feature a patented dimpled flow management feature that provides better control of air separation for more consistent air flow across the sensing elements and enabling outstanding performance in application-specific ducting.

Product Features:
  • Platinum-coated ceramic heated sensing element design is smaller and less fragile than competitive products
  • Heated sensing elements are very robust to damage from dust impingement
  • Heated sensing elements offer proven durability with more that 130 million in the field over the past 16 years
  • Patented temperature compensation algorithm offers robustness to changes in ambient air temperature
  • Patented dimple design eliminates the need for a flow straightener in most applications
  • Probe design offers low restriction air measurement driving increased horsepower
  • Interchangeability is enabled by common mounting footprint
See More

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7204)

Mass Air Flow Sensor (MAF) - 100% NEW

from

$89.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:
  • CARQUEST MAF use all new high-quality components at the highest quality standards.
  • Manufactured with new and advanced technology to perform, fit and function at OE specifications.
  • All new product that is tested with OEM equipment to OEM standards
  • Outperforms competition when tested in extreme environmental conditions
See More

Carquest Premium – Injector Seal Kit (Part No.AS077)

Injector Seal Kit

from

$9.99
Product Features:
  • Premium OE quality materials
  • Includes upper o-ring
  • Includes nylon split ring
  • Includes two combustion seals
See More

ACDelco – Multi-Purpose Gasket (Part No.14025557)

Multi-Purpose Gasket

from

$3.99
GM Genuine Parts Fuel Injector Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injector O-Ring Kit with Brackets (Part No.217-451)

Fuel Injector O-Ring Kit with Brackets

from

$38.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps provide a seal to prevent fuel leaks
  • Helps seal combustion chamber from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

2019 Chevrolet Blazer Fuel Injectors

Maybe you’re in the middle of a full rebuild of that 2019 Chevrolet Blazer. Maybe you just need a couple of Fuel Injectors. Either way, Advance Auto Parts has 9 different Fuel Injectors in our inventory ranging from $9.99 to $171.33. That means you can find the exact parts or products you need to keep that 2019 Chevrolet Blazer running smoothly.

Fuel Injectors are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2019 Chevrolet Blazer. Carquest Premium, Hitachi, and ACDelco are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Fuel Injectors for your 2019 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Fuel Injectors to keep your 2019 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Fuel Injectors Brands To Make Your 2019 Chevrolet Blazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2019 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Injectors make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Fuel Injectors brands and parts.

Popular Hitachi Fuel Injectors

We carry Hitachi parts in our stock across Air Flow Meters and Mass Air categories, plus more. For a 2019 Chevrolet Blazer, our most popular Hitachi Fuel Injectors include:
Air Flow Sensor - New Actual OE Part
from $75.99
(2)
Air Flow Sensor – New Actual OE Part
Air Flow Meters and Mass Air

FAQs for 2019 Chevrolet Blazer Fuel Injectors

What are the most purchased Fuel Injectors for the 2019 Chevrolet Blazer?

Out of 9 Fuel Injectors for the 2019 Chevrolet Blazer, the most popular in our inventory are:
Mass Air Flow Sensor (MAF) - 100% NEW
from $89.99
This product is not rated
Mass Air Flow Sensor (MAF) – 100% NEW
Air Flow Meters and Mass Air
Direct Fuel Injector Assembly
from $115.99
This product is not rated
Direct Fuel Injector Assembly
Fuel Injectors
Direct Fuel Injector Assembly
from $129.99
This product is not rated
Direct Fuel Injector Assembly
Fuel Injectors