2019 Cadillac Escalade Drive Shafts and Axles

Essential 2019 Cadillac Escalade Drive Shafts and Axles

Carquest Premium – New CV Axle (Part No.NCV10143)

New CV Axle

from

$151.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142XD)

CV Axle Shaft Assembly

from

$201.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142)

CV Axle Shaft Assembly

from

$138.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

ACDelco – Front Half-Shaft Assembly (Part No.22789359)

Front Half-Shaft Assembly

from

$593.99
ACDelco GM Original Equipment CV Axle Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These flexible assemblies consist of an inner tri-pot plunging joint and an outer constant velocity (CV) joint which is connected by an axle shaft. They transmit rotational force from the transaxle and Rear Drive Module (RDM), if equipped with primary front driven AWD, or Front Drive Module (FDM), if equipped with primary rear driven AWD to the tire and wheel assemblies. They help to maintain power during turns and other maneuvers while the internal lubricants help to resist any friction or heat buildup. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:
  • Rotates to allow the transmission of power at a constant speed while helping to reduce friction and heat
  • Axle CV and tri-pod joints are covered with protective thermoplastic boots
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
  • ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-9361)

Front Drive Shaft: Greasable, Direct Replacement

from

$539.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft (Part No.946-052)

Rear Drive Shaft

from

$658.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Rear Drive Shaft: Not Greasable, Direct Replacement (Part No.65-1025)

Rear Drive Shaft: Not Greasable, Direct Replacement

from

$446.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft (Part No.986-249)

Rear Drive Shaft

from

$718.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Anchor – Center Support Bearing Motor Mount: Center, Rear, 1 Piece (Part No.6092)

Center Support Bearing Motor Mount: Center, Rear, 1 Piece

from

$66.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 07-19; CHEV 07-19; GMC 07-19;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 2007-2019
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.00 INCH / 51 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • OCTAGON
  • WITHOUT PLATE
  • WITH STUDS
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Driveworks – Clutch Release Bearing (Part No.S-SCH-208)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

SKF – Wheel Bearing (Part No.K8000204410SKF)

Wheel Bearing

from

$86.88
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

Yukon Gear – Stub Axle Bearing For GM 8.25" IFS (Part No.18059)

Stub Axle Bearing For GM 8.25" IFS

from

$57.99
Product Features:
  • Stub axle bearing
  • Fits GM 8.25″ IFS
See More

National – Bearings (Part No.SCH-208)

Bearings

from

$21.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-RP513067)

Wheel Bearing: Direct Fit, 1 Piece

from

$37.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.

Product Features:
  • Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
  • Engineered, manufactured, and tested to meet or exceed OE specifications
  • Integrated seal design improves contamination resistance for a longer bearing life
  • High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
  • Manufactured from high quality steel to maximize durability under even the harshest driving conditions
  • Brand may vary by location
See More

Yukon Gear – Axle Bearing For ’99 & Up GM 8.25" IFS (Part No.18057)

Axle Bearing For '99 & Up GM 8.25" IFS

from

$26.99
Product Features:
  • Inner axle bearing
  • Fits 1999 and up GM 8.25″ IFS
See More

2019 Cadillac Escalade Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2019 Cadillac Escalade. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 11 different Drive Shafts and Axles in our inventory ranging from $15.49 to $399.99. That means you can find the exact parts or products you need to keep that 2019 Cadillac Escalade running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2019 Cadillac Escalade. Carquest Premium, Spicer, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2019 Cadillac Escalade, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2019 Cadillac Escalade rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2019 Cadillac Escalade Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2019 Cadillac Escalade demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Escalade the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 2019 Cadillac Escalade, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $40.99
(10)
Universal Joint
Axle Shaft Universal Joints

Top 2019 Cadillac Escalade Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 2019 Cadillac Escalade. Popular Carquest Premium parts include:
New CV Axle
from $151.99
(116)
New CV Axle
Drive Shaft and Axles

FAQs for 2019 Cadillac Escalade Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2019 Cadillac Escalade?

Out of 11 Drive Shafts and Axles for the 2019 Cadillac Escalade, the most popular in our inventory are:
Wheel Bearing: Direct Fit, 1 Piece
from $37.49
(5)
Wheel Bearing: Direct Fit, 1 Piece
Axle Shaft Bearings
CV Axle Shaft Assembly
from $151.99
This product is not rated
CV Axle Shaft Assembly
Drive Shaft and Axles
Spindle Nut
from $15.49
This product is not rated
Spindle Nut
Axle Nuts