2019 Cadillac Escalade Exhaust Parts
Find Your Specific 2019 Cadillac Escalade Exhaust Parts
Below you will find various in-demand Cadillac Exhaust Parts, components and accessories for your 2019 Escalade. Advance Auto Parts has popular Escalade parts like Exhaust Hangers, Exhaust Manifold and Headers, Exhaust Fittings and more. You’ll also find aftermarket and OEM Exhaust Parts for other Escalade model years including
2013,
2014,
2015,
2016,
2017,
2018,
2020,
2021,
2022 and more. Select a category of 2019 Cadillac Escalade Exhaust Parts below and start saving instantly.
Popular 2019 Cadillac Escalade Exhaust Parts Categories
Essential Exhaust Parts for 2019 Cadillac Escalades
GM Genuine Parts – Exhaust Manifold Gasket (Part No.12617944)
from
$17.99
GM Genuine Parts Exhaust Manifold Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They help form a gas-tight connection between the exhaust manifold and cylinder heads. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent exhaust leaks
- Helps provide a tight seal where the exhaust manifold mounts to the engine block
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Remflex – Flexible Graphite, Set Of 2, 1-3/4 Inch Round Port Size (Part No.2049)
from
$31.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Walker – Direct Fit Exhaust Resonator and Pipe Assembly 3" Inlet (OD) 3.5" Outlet (OD) (Part No.55615)
from
$275.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Flowmaster Inc. – Catalytic Converter – Direct Fit – 49 State – 2.00 in. Inlet/Outlet – 49 State (Part No.2010023)
from
$787.99
Flowmaster 49-state direct-fit catalytic converters are available for a variety of popular applications. These stainless steel converters meet or exceed USEPA standards and include a 25,000 mile emissions, and 50,000 mile/5 year exterior casing warranty. Please note: these USEPA 49-state converters are not available for sale or use on vehicles licensed or operated in the state of California.
Product Features:
See More
Product Features:
- Available for a variety of Direct-Fit applications
- Meets or exceeds all USEPA 49-state requirements
- 25,000 mile internal components emissions warranty
- 50,000 mile/5-year warranty on exterior casings
- Made in the USA
Walker – Ultra EPA Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93253)
from
$179.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
Dorman – Exhaust Manifold Clamp Repair (Part No.917-142)
from
$47.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
- Location-specific – engineered to fit the exhaust manifold on the front left or rear right on specified GM and Isuzu vehicles.
- Complete kit – includes clamp and fasteners for a thorough, secure repair
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Clamp Repair (Part No.917-107)
from
$51.99
This exhaust manifold to cylinder head repair clamp is designed to match the fit and function of the original clamp on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud.
- Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left.
- Complete kit – includes clamp and fasteners for a thorough, secure repair
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
JBA Performance – 1850S-2 1 5/8" Header Shorty Stainless Steel 02-2013 GM Truck/SUV 4.8/5.3L and 07-13 6.0/6.2L (Part No.1850S-2)
from
$642.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1850S-2 1 5/8″ Header Shorty Stainless Steel 02-2013 GM Truck/SUV 4.8/5.3L and 07-13 6.0/6.2L
- Mandrel bent stainless steel tube
JBA Performance – 1 5/8" Header Shorty Stainless Steel (Part No.1850S-2JS)
from
$799.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1850S-2JS 1 5/8″ Header Shorty Stainless Steel 02-2013 GM Truck/SUV 4.8/5.3 and 07-13 6.0/6.2L Silver Ceramic
- Mandrel bent stainless steel tube
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-218)
from
$105.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Walker – Exhaust System Hanger Insulator (Part No.35229)
from
$7.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Clamp (Part No.250-070)
from
$5.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
BRExhaust – Exhaust Clamp (Part No.250-076)
from
$5.79
Sourcing mounting parts from the manufacturer that designs and makes the exhaust system is the only way to guarantee the perfect fit. That’s why, whilst developing the exhaust system, BRExhaust also develops the installation hardware to the same standards.
Product Features:
See More
Product Features:
- whilst developing the exhaust system
- BRExhaust also develops the installation hardware to the same standards.
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Exhaust Flange Gasket (Part No.256-1054)
from
$18.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Felpro – Exhaust Pipe Flange Gasket (Part No.61014)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61561)
from
$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Flange Hardware – 4 Bolts And 2 Studs – 3/8-16 (Part No.675-217)
from
$19.29
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models.
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19177)
from
$1400.00
The MagnaFlow Street Series Cat-Back Performance Exhaust System 19177 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3.5in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19177 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19177 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Borla Performance Exhaust – T-304 Ss, 3" Pipe Dia To 2.25"Pipe Dia, Single Exhaust With Dual Exit (Part No.140652)
from
$1345.99
BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.
Product Features:
See More
Product Features:
- Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
- Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
- Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
- This System Features A Bright Chrome On T-304 Stainless Steel Tip
- Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit
MBRP Exhaust – Aluminized Steel, With Muffler, 3"Pipe Dia, Single Exhaust With Side Single Exit (Part No.S5043AL)
from
$504.99
ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that does not see much precipitation, or if you are looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.
Product Features:
See More
Product Features:
- Aluminized Steel Construction
- Mandrel Bending Ensures No Rippling In The Bends
- Comes With 4 Inch OD Tip
Borla Performance Exhaust – T-304 Ss, 3" Pipe Dia To 2.25" Dia, Single Exhaust With Dual Exit (Part No.140559)
from
$1383.99
BORLA(R) offers a full variety of systems and components for C4, C5, C6 and Z06 Vettes. When combined with a BORLA(R) Y pipe, our rear sections for C4’s will give you a Cat-Back(TM) system with an upgrade to a 2.5 Inch pipe. This increases flow over original.
Product Features:
See More
Product Features:
- BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
- Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel
- Ultra Smooth Mandrel Bends Ensure Maximum Flow And Power
- Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit
- Touring Systems Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The MostáDesirableáSound
Mahle – Exh. Man. to Pipe Ga (Part No.H4003205941MAH)
from
$15.82
Exh. Man. to Pipe Ga
Walker – Exhaust Pipe Flange Gasket (Part No.31610)
from
$9.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Victor Reinz – Catalytic Converter Gasket (Part No.71-14058-00)
from
$7.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Mahle – Exh. Man. to Pipe Ga (Part No.H4003206101MAH)
from
$11.33
Exh. Man. to Pipe Ga
Upgrade your 2019 Cadillac Escalade with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2019 Cadillac Escalade, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Exhaust Parts are key to keeping your Escalade functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Exhaust Parts for the 2019 Cadillac Escalade, designed to meet your needs without breaking the bank.
From
Exhaust Hanger
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2019 Cadillac Escalade at great prices.
Our Exhaust Parts inventory for this model
ranges from just $5.29 to $1,642.99, with
an average price of $368.44.
Our 24 Exhaust Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2019 Cadillac Escalade without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2019 Cadillac Escalade, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO, Walker, Dorman, and more.
FELPRO Exhaust Parts
start at just $5.29 and boast an impressive 5 stars average rating from customers.
Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $7.79, and at an average 4 stars rating.
With 792 customer reviews and counting, our 2019 Cadillac Escalade Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2019 Cadillac Escalade is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade in top shape, all in one place.
Start shopping confidently below for your 2019 Cadillac Escalade!
Best-Selling Exhaust Hangers for 2019 Cadillac Escalades
Enhance the driving experience in your Cadillac with 1 quality Exhaust Hanger components, starting at $7.79.
Walker – Exhaust System Hanger Insulator (Part No.35229)
from
$7.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Most Popular 2019 Cadillac Escalade Exhaust Manifold and Headers
Customize your Cadillac with 5 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers and
Exhaust Manifold and Header Hardware, all
priced under $1,307.99.
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Direct Fit Exhaust Manifold: Without Heat Shield (Part No.674-496)
from
$108.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
aFe POWER – Twisted Steel Header (Part No.48-44003)
from
$1307.99
The new Twisted Steel performance header from aFe Power is redefining the header industry with new pulse control technology. aFe engineers have designed this header using optimum tube lengths and mitered collectors for maximum flow and velocity for power delivery across the entire power band. Combine with a large 1/2″ thick head flange and 14-gauge 409 stainless steel tubing, you have a header that is strong and powerful. Twisted Steel headers are 100-percent bolt-on with no modifications necessary and are proudly engineered and built in Corona, CA.
Product Features:
See More
Product Features:
- No Cutting Or Drilling Required
- Formed Collectors
- Heavy Duty Flanges
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)
from
$22.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 2019 Cadillac Escalade Exhaust Fittings
Upgrade Cadillac Escalades with top-quality Exhaust Fittings parts, including 1 OEM and aftermarket selections for your 2019 model.
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
In-Demand Catalytic Converters for 2019 Cadillac Escalades
Select from 7 premium Catalytic Converters parts for your 2019 Cadillac Escalade, with prices ranging from $10.20 to $1,642.99.
Felpro – Exhaust Pipe Gasket (Part No.H4006977224FEL)
from
$11.32
Exhaust Pipe Gasket
Mahle – Exh. Man. to Pipe Ga (Part No.H4003205960MAH)
from
$13.87
Exh. Man. to Pipe Ga
Mahle – Exh. Man. to Pipe Ga (Part No.H4003206101MAH)
from
$11.33
Exh. Man. to Pipe Ga
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.52617)
from
$1642.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52617. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2020 GMC Yukon, 2015-2020 Cadillac Escalade, and more, this direct-fit catalytic converter also interchanges with OE parts 19420284 and 23111625, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51659)
from
$281.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51659. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51656)
from
$281.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51656. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Autopart International Inc – Exhaust Pipe Gasket (Part No.H40061911048API)
from
$10.20
Exhaust Pipe Gasket
Most Sold 2019 Cadillac Escalade Exhaust Pipes
Explore our best-selling Cadillac parts for the 2019 Escalade among 3 OEM and aftermarket options starting from $5.29.
Felpro – Exhaust Pipe Flange Gasket (Part No.61089)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61074)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Exh Res Pipe Assbly (Part No.55732)
from
$194.99
Designed to fit, perform and sound like the original system, Walker® resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Top-Rated Exhaust Parts Brands For Your 2019 Cadillac Escalade
Shop for the best-rated brands offering Exhaust Parts and other products for your 2019 Cadillac Escalades. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 2019 Escalade start at just $5.29 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2019 Cadillac Escalade Exhaust Parts
When it comes to maintaining or upgrading your 2019 Cadillac Escalade, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2019 Cadillac Escalade. With over 4 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.29, with an average price of just $12.35. Plus, with over 17 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Walker 2019 Cadillac Escalade Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2019 Cadillac Escalade owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2019 Escalade, Advance Auto Parts carries a full inventory of 3 Walker Exhaust Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Walker Exhaust Parts range from $7.79 to $194.99, plus, with more than 45 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
FAQs for 2019 Cadillac Escalade Exhaust Parts
Which Exhaust Parts are best-sellers for 2019 Cadillac Escalades?
Out of 24 Exhaust Parts that fit 2019 Cadillac Escalades, the following parts are the top sellers:
- Exhaust Manifold Hardware Kit (10214558) – $17.99
- Exhaust Manifold Hardware Kit (10840978) – $15.99
- Direct Fit Exhaust Manifold: Without Heat Shield (12019661) – $108.99
What’s the price range for 2019 Cadillac Escalade Exhaust Parts?
Exhaust Part prices for the 2019 Cadillac Escalade start at $5.29 and go up to $1,642.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2019 Cadillac Escalade?
The average price for Exhaust Parts for the 2019 Cadillac Escalade is $368.44. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Cadillac Escalade model years?
What are the cheapest Exhaust Parts for my 2019 Cadillac Escalade?
The cheapest 2019 Cadillac Escalade Exhaust Parts we carry in stock are:
- Exhaust Pipe Flange Gasket (15780226) – $5.29
- Exhaust Pipe Flange Gasket (15780188) – $6.79
- Exhaust System Hanger Insulator (18370344) – $7.79
- Exhaust Pipe Gasket (12614693) – $10.20
- Exhaust Clamp (10083053) – $10.29
What are the top-rated Exhaust Parts that fit the 2019 Cadillac Escalade?
Out of 792 reviews by customers, our 2019 Cadillac Escalade Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2019 Cadillac Escalade and their top-rated products:
- Exhaust System Kits
- Exhaust Manifold Hardware Kit (10840978) – $15.99
- Exhaust Fittings
- Exhaust Manifold Hardware Kit (10840978) – $15.99
What types of Exhaust Parts do you sell for my 2019 Cadillac Escalade?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2019 Cadillac Escalade:
Can I get help with 2019 Cadillac Escalade Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Exhaust Parts and more.
What is your return policy for Cadillac Escalade Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Cadillac Escalade Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
