2018 Volvo XC60 Fuel and Emissions Systems
More 2018 Volvo XC60 Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2018 Volvo XC60, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2018 Volvo XC60 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
DENSO – Air/Fuel Sensor (Part No.234-9160)
from
$277.99
Air/Fuel Sensor
DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 18.19" Long, Heated, Exact Fit (Part No.234-9137)
from
$247.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit the first t
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Air Fuel Ratio Senso (Part No.C50151559387ND)
from
$353.54
Air Fuel Ratio Senso
DENSO – Oxygen Sensor (Part No.C5010690289ND)
from
$166.53
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 18.50" Long, Heated, Exact Fit (Part No.234-9151)
from
$279.99
DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Walker – Walker Oxygen Sensor (Part No.C5010380863WKR)
from
$82.50
Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Product Features:
See More
Product Features:
- Improved Engine Response and Performance
- Lower Emissions
- Improved Fuel Economy
- Longer Sensor Life
- Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECA1503)
from
$173.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Bosch – Oxygen Sensor: 4 Wire, 15.55" Long, Heated, Exact Fit (Part No.15055)
from
$119.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
DENSO – Oxygen Sensor (Part No.234-8079)
from
$291.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
See More
NTK – Switching Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Direct Fit (Part No.25710)
from
$137.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: Downstream, 4 Wire, 15.35" Long, Heated, Exact Fit (Part No.234-4453)
from
$115.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
NTK – Switching Oxygen Sensor: 4 Wire, 18.75" Long, Heated, Direct Fit (Part No.25646)
from
$87.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Bosch Oxygen Sensor (Part No.C5010316667BOS)
from
$159.68
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
DENSO – Oxygen Sensor: Upstream, 4 Wire, 14.57" Long, Heated, Exact Fit (Part No.234-4487)
from
$224.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
DENSO – Oxygen Sensor: Downstream, 4 Wire, 23.23" Long, Heated, Exact Fit (Part No.234-4600)
from
$204.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated (Part No.15740)
from
$69.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
DENSO – First Time Fit Oxygen Sensor (Part No.C5010690379ND)
from
$267.66
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
- POROUS PTFE FILTER – Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool – 234-0100, O2 Sensor Socket Set
Popular 2018 Volvo XC60 Fuel and Emissions Systems Categories
2018 Volvo XC60 Fuel and Emissions Systems
You count on your 2018 Volvo XC60 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 8 Fuel and Emissions Systems ranging in price from $12.49 to $353.54, you’re sure to find everything you need for your 2018 Volvo XC60.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 4 different brands like Delphi, Rein, and DENSO. 2018 Volvo XC60 Fuel and Emissions Systems start as low as $12.49!
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2018 Volvo XC60 below to get started!
FAQs for 2018 Volvo XC60 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2018 Volvo XC60?
Out of 8 Fuel and Emissions Systems for the 2018 Volvo XC60, the most popular in our inventory are:
