2018 Volvo S60 Cooling and Climate Controls
Find Your Specific 2018 Volvo S60 Cooling and Climate Controls
Below you will find various in-demand Volvo Cooling and Climate Controls, components and accessories for your 2018 S60. Advance Auto Parts has popular S60 parts like HVAC Electrical Parts, Air Conditioning Parts, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other S60 model years including
2012,
2013,
2014,
2015,
2016,
2017,
2019,
2020,
2021 and more. Select a category of 2018 Volvo S60 Cooling and Climate Controls below and start saving instantly.
Popular 2018 Volvo S60 Cooling and Climate Controls Categories
Essential Cooling and Climate Controls for 2018 Volvo S60s
Rein – Expansion Tank (Part No.EPT0129)
from
$45.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
KAI – A/C Condenser (Part No.CNDDPI3737)
from
$107.99
New Platinum Pro A/C Condenser
Product Features:
See More
Product Features:
- Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1333)
from
$26.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10262)
from
$22.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Rein – Cap-Expansion Tank (Part No.CPE0028P)
from
$10.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432550)
from
$317.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
KAI – Radiator (Part No.RAD2805)
from
$246.99
New Platinum Pro Radiator, 2.3/2.4/2.5/2.9 Liter Engines, Automatic Or Manual Transmissions
Product Features:
See More
Product Features:
- 2.3/2.4/2.5/2.9 Liter Engines, Automatic Or Manual Transmissions, Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Radiator Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39084)
from
$43.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39165)
from
$33.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713998)
from
$250.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.6161)
from
$154.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
Dorman – Air Conditioning Pressure Sensor (Part No.904-614)
from
$90.99
Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.
Product Features:
See More
Product Features:
- Direct replacement – this A/C transducer switch is an exact replacement for the original switch
- Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
- Easy installation – no special tools required
- Quality tested – switch has been tested to ensure proper fit and function
Dorman – Anti Lock Braking System Sensor (Part No.970-184)
from
$141.99
This direct replacement ABS wheel speed sensor matches the fit and function of an original equipment sensor. Made of quality materials with factory-style electrical connectors, this sensor has been designed and tested to be durable and reliable.
Product Features:
See More
Product Features:
- Ideal replacement – this ABS wheel speed sensor exactly matches the fit and function of the original equipment sensor to restore safe braking performance in all conditions
- Durable construction – this wheel speed sensor is made from quality materials to ensure a reliable repair and a long service life
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this ABS sensor has undergone try-on and material testing to ensure a quality fit and reliable performance
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA1379)
from
$105.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83141)
from
$40.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Filter Drier withPad Mount (Part No.T83170)
from
$45.49
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Motorad – Integrated Thermostat Housing: With Gasket, 194 Degrees (Part No.909-194)
from
$221.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Product Features:
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.1018-221)
from
$201.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Factory Air – Coolant Temp Sensor Switch (Part No.36424)
from
$34.05
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Color coded for easy identification
- Zinc coated terminal to resist corrosion
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1985)
from
$18.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – Heater Core (Part No.910534)
from
$128.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
Behr – BEHR Heater Core (Part No.R3000136856BEH)
from
$263.03
Behr manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability.
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2005)
from
$49.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – Blower Motor: with Wheel (Part No.75861)
from
$213.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM.Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Carquest Premium – Blower Motor: With Wheel (Part No.76523)
from
$403.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Functionally Equivalent to OE Design
- Magnetic size and properties compare or exceed OEM
- Hermetically Sealed & Thermally Protected Electronics
Carquest Premium – Blower Motor: with Wheel (Part No.75032)
from
$140.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Upgrade your 2018 Volvo S60 with Top-Quality Cooling and Climate Controls
When it comes to maintaining or upgrading your 2018 Volvo S60, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volvo or enhancing its overall performance, Cooling and Climate Controls are key to keeping your S60 functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Cooling and Climate Controls for the 2018 Volvo S60, designed to meet your needs without breaking the bank.
From
HVAC Electrical Part
replacements to
Air Conditioning Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2018 Volvo S60 at great prices.
Our Cooling and Climate Controls inventory for this model
ranges from just $18.99 to $272.99, with
an average price of $98.84.
Our 17 Cooling and Climate Controls in stock come from 5 trusted brands, so you’re sure to find the right part for your 2018 Volvo S60 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2018 Volvo S60 is always ready to roll. We’re committed to providing you with everything you need to keep your S60 in top shape, all in one place.
Start shopping confidently below for your 2018 Volvo S60!
Best-Selling HVAC Electrical Parts for 2018 Volvo S60s
Enhance the driving experience in your Volvo with 1 quality HVAC Electrical Part components, starting at $26.99.
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1333)
from
$26.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Most Popular 2018 Volvo S60 Air Conditioning Parts
Customize your Volvo with 8 Air Conditioning Parts products
like Expansion Valve and Orifice Tubes,
AC Condensers, and
Accumulator and Receiver Driers, all
priced under $250.99.
Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713998)
from
$250.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.
Product Features:
See More
Product Features:
- This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system.
- This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
- The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
- Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
- Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
- All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
- We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
- Our condensers are manufactured from rigid design standards to fit OEM dimensions.
- Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
- Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges.
KAI – A/C Condenser (Part No.CND3998)
from
$116.99
New Platinum Pro A/C Condenser, With Receiver Drier
Product Features:
See More
Product Features:
- With Receiver Drier, Made Of Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4265)
from
$26.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA3641)
from
$98.99
Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- O-rings or seals are included (where applicable)
- Weather-tight connectors prevent leaks and corrosion for longer life
- Includes all necessary brackets and grommets for easier installation
- Extensive design validation testing and 100% end-of-line tested
- Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Dorman – Air Conditioning Pressure Sensor (Part No.904-614)
from
$90.99
Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.
Product Features:
See More
Product Features:
- Direct replacement – this A/C transducer switch is an exact replacement for the original switch
- Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
- Easy installation – no special tools required
- Quality tested – switch has been tested to ensure proper fit and function
Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2005)
from
$49.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
Product Features:
See More
Product Features:
- Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
- Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
- All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
- All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
Carquest Premium – A/C Filter Drier withPad Mount (Part No.T83170)
from
$45.49
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39429)
from
$39.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
Top Picks for 2018 Volvo S60 Engine Cooling Parts
Upgrade Volvo S60s with top-quality Engine Cooling Parts parts, including 6 OEM and aftermarket selections for your 2018 model.
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10262)
from
$22.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
KAI – Radiator (Part No.RAD13180)
from
$156.99
New Platinum Pro Radiator
Product Features:
See More
Product Features:
- Made Of Plastic and Aluminum
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Radiator Cap Not Included
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813315)
from
$272.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.
Product Features:
See More
Product Features:
- Thermal tested under real-life temperature simulations
- High tensile strength aluminum for maximum crimp strength
- Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
- Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.1018-221)
from
$201.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Rein – Expansion Tank (Part No.EPT0130)
from
$45.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Carquest Premium – Coolant Temperature Sensor (Part No.WTC1985)
from
$18.99
Carquest Premium coolant temperature sensors and switches are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry, Carquest Premium coolant temperature sensors and switches undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium coolant temperature sensors and switches are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- OE precision matched thermistor ensuring sensors match OE output resistances across all temperature positions
- O-rings, seals or thread sealant are included if required
- Weather-tight connectors prevent leaks and corrosion for longer life
- Extensive design validation testing and 100% end-of-line tested
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
In-Demand Blower Motor and Related Products for 2018 Volvo S60s
Select from 1 premium Blower Motor and Related Products parts for your 2018 Volvo S60.
Carquest Premium – Blower Motor: with Wheel (Part No.75032)
from
$140.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.
Product Features:
See More
Product Features:
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
- Meets or exceeds OE design and performance
- Magnetic size and properties compare or exceed OEM
- Windings meet or exceed OEM specifications
- Motor RPM equivalent to or exceeds OEM motor
Most Sold 2018 Volvo S60 Heating Parts
Explore our best-selling Volvo parts for the 2018 S60 among 1 OEM and aftermarket options starting from $71.99.
Carquest Premium – Heater Core (Part No.910709)
from
$71.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Product Features:
See More
Product Features:
- All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
- Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
- Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
- Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
- Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
FAQs for 2018 Volvo S60 Cooling and Climate Controls
Which Cooling and Climate Controls are best-sellers for 2018 Volvo S60s?
Out of 17 Cooling and Climate Controls that fit 2018 Volvo S60s, the following parts are the top sellers:
- Radiator (11755418) – $156.99
- Blower Motor: with Wheel (11575556) – $140.99
- A/C Condenser (11835330) – $116.99
What’s the price range for 2018 Volvo S60 Cooling and Climate Controls?
Cooling and Climate Control prices for the 2018 Volvo S60 start at $18.99 and go up to $272.99 for the most premium parts.
What’s the average price of a Cooling and Climate Control for a 2018 Volvo S60?
The average price for Cooling and Climate Controls for the 2018 Volvo S60 is $98.84. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Cooling and Climate Controls for other Volvo S60 model years?
What are the cheapest Cooling and Climate Controls for my 2018 Volvo S60?
The cheapest 2018 Volvo S60 Cooling and Climate Controls we carry in stock are:
- Coolant Temperature Sensor (12423037) – $18.99
- Engine Coolant Reservoir Cap (10006766) – $22.99
- ABS Wheel Speed Sensor (12471860) – $26.99
- Ambient Air Temperature Sensor (12471805) – $26.99
- A/C Block Type Flange Expansion Valve (11575926) – $39.99
What are the top-rated Cooling and Climate Controls that fit the 2018 Volvo S60?
Out of 14 reviews by customers, our 2018 Volvo S60 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2018 Volvo S60 and their top-rated products:
- Engine Cooling Parts
- Engine Coolant Reservoir Cap (10006766) – $22.99
What types of Cooling and Climate Controls do you sell for my 2018 Volvo S60?
As of 11/2/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2018 Volvo S60:
Can I get help with 2018 Volvo S60 Cooling and Climate Control orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volvo Cooling and Climate Controls and more.
What is your return policy for Volvo S60 Cooling and Climate Controls?
Advance Auto Parts keeps returns simple. For new Volvo S60 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
