2018 Ram ProMaster 3500 Cooling and Climate Controls

Essential Cooling and Climate Controls for 2018 Ram ProMaster 3500s

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5110)

Engine Water Pump: New, Gasket/Seals Included

from

$89.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-637)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$366.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Dorman – BMR (Part No.984-123)

BMR

from

$54.99
Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

MAHLE Original – Engine Coolant Thermostat Seal (Part No.C32590)

Engine Coolant Thermostat Seal

from

$2.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Dorman – Radiator Fan Control Relay (Part No.921-301)

Radiator Fan Control Relay

from

$62.99
This cooling fan relay matches the function and performance of the original relay to help maintain proper cooling system operation. Durably constructed with factory-style connectors, this relay has undergone testing to ensure trouble-free service.

Product Features:
  • Ideal replacement – this cooling fan relay matches the function of the original relay on specified vehicle years, makes and models.
  • Durable construction – this relay is made with quality materials to deliver reliable service.
  • Easy to install – this relay uses factory style connections for a simple installation
  • Quality tested – this part has undergone on-vehicle testing to ensure proper function and performance
See More

Carquest Premium – Premium Engine Cooling Fan Resistor WTC2325 (Part No.WTC2325)

Premium Engine Cooling Fan Resistor WTC2325

from

$91.99
Application matched components ensure the cooling fan system can be returned to like new condition.

Product Features:
  • The Engine Cooling Fan Resistor is part of the radiator and A/C condenser fan system operation. The engine computer will use the resistor to control the operating speed of the fan motor to achieve a lower fan speed during certain vehicle operating conditi
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76990)

Blower Motor: With Wheel

from

$169.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1758)

A/C Refrigerant Pressure Sensor

from

$75.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64061)

A/C Evaporator Parallel Flow

from

$126.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C New, with Clutch, with 6SBU16C Compressor (Part No.T198398)

A/C New, with Clutch, with 6SBU16C Compressor

from

$732.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C New, with Clutch, with 7SBH17 Compressor (Part No.T198396)

A/C New, with Clutch, with 7SBH17 Compressor

from

$647.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA2033)

HVAC Cut-Off Switch

from

$95.99
HVAC Cut-Off Switch

KAI – A/C Expansion Valve (Part No.ACX010849)

A/C Expansion Valve

from

$43.99
New Standard Replacement A/C Expansion Valve, Front

Product Features:
  • Front
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Radiator (Part No.813448)

Radiator

from

$249.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Dorman – Engine Coolant Crossover Pipe (Part No.902-3102)

Engine Coolant Crossover Pipe

from

$54.99
This engine coolant crossover pipe matches the original pipe for fit and function to ensure proper coolant flow through the engine. Engineered to withstand the underhood environment, this pipe is made from quality materials to resist leaking.

Product Features:
  • Direct replacement – this engine coolant crossover pipe matches fit and function of the original equipment pipe.
  • Quality construction – this part has been designed to resist cracking and leaking.
  • Durable materials – this coolant pipe is engineered from quality materials to withstand harsh underhood conditions
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Motorad – Standard Thermostat: With Thermostat Insert, With Seal, 203 Degrees (Part No.724-203)

Standard Thermostat: With Thermostat Insert, With Seal, 203 Degrees

from

$18.29
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Felpro – Engine Water Pump Gasket (Part No.35982)

Engine Water Pump Gasket

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Integrated Thermostat Housing Assembly (Part No.902-3117)

Integrated Thermostat Housing Assembly

from

$205.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.71-14227-00)

Engine Coolant Thermostat Housing Gasket

from

$14.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Application specific design provides an exceptional fit.
  • Validated for fit, form, and function.
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714614)

A/C Condenser and Receiver Drier Assembly

from

$211.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – Premium HVAC Blend Door Actuator FAA1224 (Part No.FAA1224)

Premium HVAC Blend Door Actuator FAA1224

from

$44.99
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.

Product Features:
  • The heating-ventilation-air-condition (HVAC) air distribution system is designed to control the movement of air in the HVAC air distribution assembly as well as control the interior cabin temperature. Actuator doors which may be mechanically or electrical
  • 100% end-of-line tested to ensure accurate operation providing product reliability, every time.
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35975)

Engine Coolant Thermostat Housing Gasket

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1563)

Coolant Temperature Sensor

from

$8.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Accessory Power Relay (Part No.RAA2912)

Accessory Power Relay

from

$26.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-832)

Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement

from

$112.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Upgrade your 2018 Ram ProMaster 3500 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2018 Ram ProMaster 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ram or enhancing its overall performance, Cooling and Climate Controls are key to keeping your ProMaster 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Cooling and Climate Controls for the 2018 Ram ProMaster 3500, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2018 Ram ProMaster 3500 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $2.99 to $732.99, with an average price of $132.24. Our 47 Cooling and Climate Controls in stock come from 13 trusted brands, so you’re sure to find the right part for your 2018 Ram ProMaster 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Ram ProMaster 3500, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Dorman, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Dorman and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $23.99, and at an average 4 stars rating. With 715 customer reviews and counting, our 2018 Ram ProMaster 3500 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Ram ProMaster 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your ProMaster 3500 in top shape, all in one place. Start shopping confidently below for your 2018 Ram ProMaster 3500!

Best-Selling Blower Motor and Related Products for 2018 Ram ProMaster 3500s

Enhance the driving experience in your Ram with 2 quality Blower Motor and Related Product components, starting at $54.99.

Carquest Premium – Blower Motor: With Wheel (Part No.76990)

Blower Motor: With Wheel

from

$169.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Dorman – BMR (Part No.984-123)

BMR

from

$54.99
Product Features:
  • Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
  • Restores performance – fixes a fan that’s only operating on one speed or not working at all
  • Thoroughly tested – examined and validated to perform safely and effectively
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Most Popular 2018 Ram ProMaster 3500 Engine Cooling Parts

Customize your Ram with 33 Engine Cooling Parts products like Thermostats, Radiators, and Water Pumps, all priced under $474.82.

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Felpro – THERMOSTAT GASKET (Part No.35974)

THERMOSTAT GASKET

from

$9.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Dorman – Thermostat Assembly: Includes Thermostat housing and Gasket, 203 Degrees (Part No.902-3036)

Thermostat Assembly: Includes Thermostat housing and Gasket, 203 Degrees

from

$23.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5110)

Engine Water Pump: New, Gasket/Seals Included

from

$89.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

MAHLE Original – Engine Coolant Thermostat Seal (Part No.C32590)

Engine Coolant Thermostat Seal

from

$2.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Felpro – Engine Water Pump Gasket (Part No.35982)

Engine Water Pump Gasket

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

NTK – Engine Coolant Temperature Sensor (Part No.EF0173)

Engine Coolant Temperature Sensor

from

$34.99
The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Dorman – Engine Coolant Crossover Pipe (Part No.902-3102)

Engine Coolant Crossover Pipe

from

$54.99
This engine coolant crossover pipe matches the original pipe for fit and function to ensure proper coolant flow through the engine. Engineered to withstand the underhood environment, this pipe is made from quality materials to resist leaking.

Product Features:
  • Direct replacement – this engine coolant crossover pipe matches fit and function of the original equipment pipe.
  • Quality construction – this part has been designed to resist cracking and leaking.
  • Durable materials – this coolant pipe is engineered from quality materials to withstand harsh underhood conditions
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Radiator (Part No.813448)

Radiator

from

$249.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.35975)

Engine Coolant Thermostat Housing Gasket

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-637)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$366.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.621-638)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$315.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part.
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Dorman – Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement (Part No.603-832)

Pressurized Coolant Reservoir: Clear, Plastic, Original Equipment Replacement

from

$112.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
  • Ideal solution – engineered for a seamless installation.
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Dorman – Engine Coolant Crossover Pipe (Part No.902-3102HP)

Engine Coolant Crossover Pipe

from

$54.99
This engine coolant crossover pipe matches the original pipe for fit and function to ensure proper coolant flow through the engine. Engineered to withstand the underhood environment, this pipe is made from quality materials to resist leaking.

Product Features:
  • Ideal replacement – this engine coolant crossover pipe matches fit and function of the original equipment pipe.
  • Improved design – this part has been redesigned using aluminum instead of the original equipment plastic to resist cracking and leaking.
  • Durable materials – designed for greater heat resistance in harsh underhood environment
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1216)

Coolant Temperature Sensor

from

$34.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Dorman – Radiator Fan Control Relay (Part No.921-301)

Radiator Fan Control Relay

from

$62.99
This cooling fan relay matches the function and performance of the original relay to help maintain proper cooling system operation. Durably constructed with factory-style connectors, this relay has undergone testing to ensure trouble-free service.

Product Features:
  • Ideal replacement – this cooling fan relay matches the function of the original relay on specified vehicle years, makes and models.
  • Durable construction – this relay is made with quality materials to deliver reliable service.
  • Easy to install – this relay uses factory style connections for a simple installation
  • Quality tested – this part has undergone on-vehicle testing to ensure proper function and performance
See More

TYC – Auxiliary Fan Assemb (Part No.G50001426619TYC)

Auxiliary Fan Assemb

from

$474.82
Auxiliary Fan Assemb

Koyo Cooling – Radiator (Part No.G1000657231KCS)

Radiator

from

$322.15
Radiator

Worldpac – RADIATOR (Part No.G10004202736TYC)

RADIATOR

from

$165.99
RADIATOR

Worldpac – THERMOSTAT HOUSING (Part No.G4010657111GAT)

THERMOSTAT HOUSING

from

$117.88
THERMOSTAT HOUSING

Motorad – Integrated Thermostat Housing: 174 Degrees (Part No.994-174)

Integrated Thermostat Housing: 174 Degrees

from

$115.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Worldpac – THERMOSTAT HOUSING (Part No.G40104192542ANA)

THERMOSTAT HOUSING

from

$107.00
THERMOSTAT HOUSING

Worldpac – THERMOSTAT HOUSING (Part No.G40104141626DOR)

THERMOSTAT HOUSING

from

$79.24
THERMOSTAT HOUSING

Carquest Premium – Coolant Temperature Sensor with Washer (Part No.WTC2155)

Coolant Temperature Sensor with Washer

from

$65.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Dorman – THERMST HOUSING ASSY (Part No.902-3036XD)

THERMST HOUSING ASSY

from

$39.99
THERMST HOUSING ASSY

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Felpro – Engine Water Pump Gasket (Part No.36112)

Engine Water Pump Gasket

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorad – Integrated Thermostat Housing: With Seal, 203 Degrees (Part No.928-203)

Integrated Thermostat Housing: With Seal, 203 Degrees

from

$16.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.71-14227-00)

Engine Coolant Thermostat Housing Gasket

from

$14.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Application specific design provides an exceptional fit.
  • Validated for fit, form, and function.
See More

Mahle – Water Outlet Gasket (Part No.G3045477173MAH)

Water Outlet Gasket

from

$10.30
Water Outlet Gasket

Felpro – Thermostat Gasket (Part No.36113)

Thermostat Gasket

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Mahle – Engine Coolant Thermostat O-Ring (Part No.G40301189824MAH)

Engine Coolant Thermostat O-Ring

from

$5.18
The Mahle Engine Coolant Thermostat O-Ring is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Seals the thermostat housing and helps prevent coolant from leaking from the engine for proper engine temperature
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Top Picks for 2018 Ram ProMaster 3500 Blend Doors

Upgrade Ram ProMaster 3500s with top-quality Blend Doors parts, including 1 OEM and aftermarket selections for your 2018 model.

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-029)

HVAC Blend Door Actuator: 1 Piece

from

$28.99
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

In-Demand Air Conditioning Parts for 2018 Ram ProMaster 3500s

Select from 11 premium Air Conditioning Parts parts for your 2018 Ram ProMaster 3500, with prices ranging from $26.99 to $732.99.

Carquest Premium – A/C Block Expansion Valve (Part No.T39434)

A/C Block Expansion Valve

from

$59.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Evaporator Parallel Flow (Part No.T64061)

A/C Evaporator Parallel Flow

from

$126.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C New, with Clutch, with 6SBU16C Compressor (Part No.T198398)

A/C New, with Clutch, with 6SBU16C Compressor

from

$732.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C New, with Clutch, with 7SBH17 Compressor (Part No.T198396)

A/C New, with Clutch, with 7SBH17 Compressor

from

$647.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714614)

A/C Condenser and Receiver Drier Assembly

from

$211.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Autopart International Inc – A/C COND. & RECEIVER (Part No.R12311928640API)

A/C COND. & RECEIVER

from

$108.65
A/C COND. & RECEIVER

Carquest Premium – HVAC Cut-Off Switch (Part No.ACA2033)

HVAC Cut-Off Switch

from

$95.99
HVAC Cut-Off Switch

Carquest Premium – Premium Engine Cooling Fan Resistor WTC2325 (Part No.WTC2325)

Premium Engine Cooling Fan Resistor WTC2325

from

$91.99
Application matched components ensure the cooling fan system can be returned to like new condition.

Product Features:
  • The Engine Cooling Fan Resistor is part of the radiator and A/C condenser fan system operation. The engine computer will use the resistor to control the operating speed of the fan motor to achieve a lower fan speed during certain vehicle operating conditi
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1758)

A/C Refrigerant Pressure Sensor

from

$75.99
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Santech – A/C Expansion Valve (Part No.R1045512971SII)

A/C Expansion Valve

from

$61.89
A/C Expansion Valve

Carquest Premium – Accessory Power Relay (Part No.RAA2912)

Accessory Power Relay

from

$26.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top-Rated Cooling and Climate Controls Brands For Your 2018 Ram ProMaster 3500

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2018 Ram ProMaster 3500s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Dorman, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2018 ProMaster 3500 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2018 Ram ProMaster 3500 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2018 Ram ProMaster 3500, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2018 Ram ProMaster 3500. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Dorman 2018 Ram ProMaster 3500 Cooling and Climate Controls

Dorman auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2018 Ram ProMaster 3500 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2018 ProMaster 3500, Advance Auto Parts carries a full inventory of 10 Dorman Cooling and Climate Controls. Plus you will be keeping your Ram in peak condition while saving money because prices on these Dorman Cooling and Climate Controls range from $23.99 to $366.99, plus, with more than 67 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

Engine Coolant Crossover Pipe
from
$54.99
This product is not rated

Engine Coolant Crossover Pipe

“”

Radiator Fan Assembly: Dual, Cost Effective & Reliable
from
$315.99
This product is not rated

Radiator Fan Assembly: Dual, Cost Effective & Reliable

“”

Radiator Fan Assembly: Dual, Cost Effective & Reliable
from
$366.99
This product is not rated

Radiator Fan Assembly: Dual, Cost Effective & Reliable

“”

FAQs for 2018 Ram ProMaster 3500 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2018 Ram ProMaster 3500s?

Out of 47 Cooling and Climate Controls that fit 2018 Ram ProMaster 3500s, the following parts are the top sellers:

What’s the price range for 2018 Ram ProMaster 3500 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2018 Ram ProMaster 3500 start at $2.99 and go up to $732.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2018 Ram ProMaster 3500?

The average price for Cooling and Climate Controls for the 2018 Ram ProMaster 3500 is $132.24. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Ram ProMaster 3500 model years?

Yes, we currently carry Cooling and Climate Controls for 9 model years of Ram ProMaster 3500s between 2014 and 2023. Cooling and Climate Controls are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2017, 2016, 2015, 2014, and 2023.

What are the cheapest Cooling and Climate Controls for my 2018 Ram ProMaster 3500?

The cheapest 2018 Ram ProMaster 3500 Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2018 Ram ProMaster 3500?

Out of 715 reviews by customers, our 2018 Ram ProMaster 3500 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2018 Ram ProMaster 3500 and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2018 Ram ProMaster 3500?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2018 Ram ProMaster 3500:

Can I get help with 2018 Ram ProMaster 3500 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ram Cooling and Climate Controls and more.

What is your return policy for Ram ProMaster 3500 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Ram ProMaster 3500 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.