2018 Ram 2500 Suspension Parts

Below you will find various in-demand Ram Suspension Parts, components and accessories for your 2018 2500. Advance Auto Parts has popular 2500 parts like Shocks and Struts, Control Arms, Coil and Leaf Springs and more. You’ll also find aftermarket and OEM Suspension Parts for other 2500 model years including 2014, 2015, 2016, 2017, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2018 Ram 2500 Suspension Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2018 Ram 2500 Suspension Parts Categories

Suspension Air Compressors

Rear Shock and Struts

Front Shock and Struts

Coil Spring Sets

Lower Control Arms

Leaf Spring Bumpers

Lift and Lowering Kits

Air Suspension Helper Springs

Shock Boots, Levelers, and Accessories

Helper Springs

Lower Control Arm Bushings

Essential Suspension Parts for 2018 Ram 2500s

from

$421.99

Timbren Suspension Enhancement System – The Decision is Easy…Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Improve load handling Haul heavy loads with ease Eliminate sag and sway

Product Features:

Eliminate Suspension Sag When Towing A Heavy Trailer Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway A Condition Which Occurs With Unbalanced Loads In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$117.99

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

Increase Rear Rake For Towing And Hauling
Leveling Rear Of Truck With Front
Easy Installation
Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials

from

$255.99

Firestone heavy duty Ride-Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry-free service. Ride-Rite air helper springs can be installed on most light trucks, motor-homes, RV, SUV and vans. Ride-Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride-Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride-Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3,200 to 5,000 Pounds of load leveling capacity. Ride-Rite air helper springs enhance the ride by reducing inter-leaf friction. Please remember that air springs do not increase the load-carrying capacity of your vehicle. Ride-Rite kits are application specific and are designed for hassle-free fitment to the OEM suspension.

Product Features:

Keep The Vehicle Level: Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load

from

$255.99

Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:

Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load

from

$87.99

The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.

Product Features:

Twin Tube Construction
Advanced Foam-Cell Technology
Vehicle Specific Multi-Stage Valving
Increased Fluid Capacity For MAX Heat Dissipation
360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
Chrome Plated Shaft And Sintered Iron Piston
Comes With Black Boot

from

$271.99

Product Features:

Packed With 35 Years Of Race Winning Technology
Performance Tuned For Vehicle Specific Application
Aluminum Body Dissipates Heat Faster Than Steel. Black Anodized CNC Machined Aluminum Components
IFP Separates Oil From High-Pressure Nitrogen Gas
100 Percent Serviceable And Tunable For Longer Lifespan
Nitrile Bushings Allow For Incread Articulation
Redundant Sealing System, Long Lasting Performance
Limited 1 Year Factory And 90 Day Valving Warranty

from

$50.99

This leaf spring bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$39.99

Shock Kit

from

$77.99

Carquest Premium control arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium control arms are built to match OE construction with steel or aluminum, and where applicable ball joints that are either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. The steel control arms feature a corrosion-resistant coating to reduce rust for a longer lasting part. Each part number in the Carquest Premium control arm line is designed and built to deliver the quality that you demand.

Product Features:

Engineered for OE fit, form and function
Application specific, direct fitment for trouble-free installation
Corrosion-resistant coating on steel control arms to reduce rust and extend service life
Pre-installed ball joints and bushings (when applicable) for easy installation
Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional
Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
Hardware included on many applications for easier installation

from

$86.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$1.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Offering Quality Replacement Parts
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Offers OE Fit And Function
Easy To Install

from

$66.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$25.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$26.99

Monroe Shock-Mate Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$1148.99

When the factory air suspension compressor fails from fatigue, moisture infiltration or motor burnout on certain Ram 2500 and 3500 trucks, the dealer repair solution is to offer the same failure-prone design. This Dorman OE FIX compressor features upgraded wiring and coil materials in the motor, solenoid valve and coil assembly to help eliminate the common sources of compressor failure, providing a more permanent repair.

Product Features:

Upgraded repair – this air suspension compressor features upgraded wiring and coil materials in the motor, solenoid valve and coil assembly to help eliminate common sources of OE compressor failure
Direct replacement – designed to match the performance of the original equipment compressor on specified Ram 2500 and 3500 trucks
Improved design – engineered to resist fatigue and motor burnout for a more permanent repair solution
Trustworthy quality – backed by a team of product experts in the United States with more than a century of experience in the design of heavy duty truck parts

from

$257.99

Product Features:

COMPATIBILITY — Designed for Ram 2500/3500 heavy-duty trucks; Exc. Power Wagon
FITSáLARGER TIRES — Provides 2.5-in.áof lift to accommodate larger wheel/tires and to restore lost height due to heavyáwincháor bumperá(tire size varies by manufacture;áaftermarket bumpers, winches, etc. affect lift height)
EASY TO INSTALL — Kit includes two front coil springs that install easily with included hardware
RESISTS CORROSION — Powder-coated to resist rust and corrosion
ENGINEERED TO LASTá–áMade of high-strength steel that is shotápeenedáand heat treated for long life
BUY WITH CONFIDENCE — Comes with Rancho’s limited warranty

from

$317.99

Each Softride(R) Coil Spring Is Preset And Formed From 5160H Alloy Ensuring Higher Tensile Strength And Longer Life. Each spring is powder coated to resist corrosion.

Product Features:

Made From High Quality 5160H Chromium Alloy
Shot-Peened To Yield A Higher Tensile Strength And Longer Life
Powder Coating Is Applied For Protection Against Corrosion
High Quality Product
Easy Installation

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$79.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Ram 2500
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$89.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on-road and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$43.99

Monroe® Gas-Matic® LT gas-charged shock absorbers provide improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4x4s at an economical price.

Product Features:

DESIGNED FOR TRUCKS — Specifically designed for import and domestic light trucks, full size trucks, vans and 4x4s
CONSISTENT RIDE — Velocity Proportional Valving (VPV) technology and all-weather fluid containing special additives to reduce friction and ensure smooth rod reaction and an overall smoother ride
RELIABLE PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while banded piston and bronze reinforced guide provide durability
GET MORE MILES FROM YOUR RIDE — Designed and validated to meet OE spec and deliver consistent performance

from

$85.99

NITRO N8000 series shocks are recommended for full size vehicles and moderate to extreme off-road applications. Skyjacker(R) nitro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

150 PSI Pressurized Nitrogen Gas
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$71.99

HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$266.99

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Product Features:

Made From Premium Materials
Meets The Highest Quality Standards
Provide A Smooth, Comfortable Ride
Maintain That Factory Ride Quality
Easy Installation

from

$129.99

Daystar Leveling Kits work within the factory suspension design, meaning that we work within the factory design parameters to achieve an increase in ride height that levels the stance of the vehicle. Because we work within the factory design, there are not a bunch additional modifications involved. Everything needed is included in the kit, there is everything you need and nothing you do not. If there are extra items required, such as longer shocks, it is clearly stated in the application description. Torsion bar applications require their own unique approach to leveling the stance of the vehicle. With torsion bar applications, we supply new forged torsion keys that meet or exceed factory specifications. These torsion keys have been re-indexed to increase ride height up to 2in. and level the stance of the vehicle. In select applications, extended shock brackets are also included. Daystar Leveling Kits include only front lift components to level the stance of the vehicle. We also offer Budget Boost kits, which provide a mild increase in ride height and are more economically priced than our Leveling Kits. Since our start with Leveling Kits in 1995 we have used our expertise to develop over 300 applications that span all of the popular trucks and SUVs…do your homework and you’ll see that we have done ours

Product Features:

No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
Top Mount Easy Install Design

from

$631.99

Firestone Air Springs are specifically designed to fit on your vehicle and provide an array of benefits. Use the application guide beginning on page 4 to determine which air spring product is designed for your vehicle. Enjoy easy installation and the smooth ride, improved stability and safer load-carrying capacity offered by the original Air Spring.

Product Features:

Most Popular And Comprehensive Air Spring Line
Maximizes The Vehicle Safe Load-Carrying Capacity, Stability, Ride Quality And Brake Effectiveness
Supports Up To 5,000 Pounds
Most Kits Are No-Drill Systems, Easily Installation

from

$552.99

Load lifter 5000 kits handle big loads with full time load support while improving safety and ride quality. They are fully adjustable to keep your vehicle riding level and comfortable, whether loaded, towing, or light on any road conditions.

Product Features:

Up To 5000 Pounds Of Leveling Capacity
Air Adjustable From 5 To 100 PSI
Built With Superior 2-Ply Fabric Reinforced Rubber
Includes Exclusive Roll Plates. No Mileage Restriction
End Caps Made Of Ultra High Strength Zytel(R) Nylon Strong As Steel, But Weighs Less And Is Corrosion Proof
Easy To Install With Illustrated Instruction Manual
Easy-To-Use Air Fittings
Refer To The Document Tab For The New Authorized Installer Program

from

$631.99

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

Level The Vehicle Front To Rear And Side To Side
Adjustability 5 To 100 PSI
Stabilize The Vehicle While Loaded
Maximize Vehicles Load Carrying Capacity
Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Upgrade your 2018 Ram 2500 with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2018 Ram 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ram or enhancing its overall performance, Suspension Parts are key to keeping your 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Suspension Parts for the 2018 Ram 2500, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Control Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2018 Ram 2500 at great prices. Our Suspension Parts inventory for this model ranges from just $1.99 to $1,148.99, with an average price of $224.11. Our 66 Suspension Parts in stock come from 13 trusted brands, so you’re sure to find the right part for your 2018 Ram 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Ram 2500, we stock popular OEM and aftermarket Suspension Parts from top names like Monroe, and more. Monroe Suspension Parts start at just $24.99 and boast an impressive 4.4 stars average rating from customers. With 876 customer reviews and counting, our 2018 Ram 2500 Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Ram 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your 2500 in top shape, all in one place. Start shopping confidently below for your 2018 Ram 2500!

Best-Selling Shocks and Struts for 2018 Ram 2500s

Enhance the driving experience in your Ram with 45 quality Shocks and Strut components, starting at $24.99.

show more show less

from

$71.99

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$26.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$24.99

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$139.99

Skyjacker new M95 Monotube Shock is the ultimate shock absorber for light trucks, Jeeps and SUVs. This single tube design helps operating temperatures stay cooler under extreme conditions. The high pressure nitrogen gas and floating piston technology combine to create the fastest responding shock ever

Product Features:

Monotube Design. Fastest Responding Shock Ever
Dirt Seal Protection For Oil Seal And Rod Bearing
High Pressure Nitrogen Gas Charged
Custom Tuned For Each Vehicle
No Fade Or Lag For Consistent Performance
180 Degree Directional Mounting
No Fade Or Lag For Consistent Performance

from

$89.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$96.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe OESpectrum light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$165.99

Get premium control and performance with Rancho RS9000XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on-road and off-road use, towing and more.

Product Features:

NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$96.99

Featuring a unique, exclusive valving system and advanced compression functionality, Rancho RS5000X shocks deliver improved overall on- and off-road handling and performance.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 Deg F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$71.99

CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
CONTROL AND DURABILITY – Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE – Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration
BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
5/8 inch Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$97.99

Designed for midsize and full-size trucks and vans, Monroe Gas-Magnum shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

DESIGNED FOR TRUCKS AND VANS – Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
BUILT TO LAST – Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
CONSISTENT RIDE – OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
LONGER SERVICE LIFE – Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference guarantee
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$87.99

Twin Tube Construction
Advanced Foam-Cell Technology
Vehicle Specific Multi-Stage Valving
Increased Fluid Capacity For MAX Heat Dissipation
360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
Chrome Plated Shaft And Sintered Iron Piston
Comes With Black Boot

from

$147.99

NINE LEVELS OF PERFORMANCE – Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
DESIGNED FOR HARDWORKING VEHICLES – Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
INDUSTRY FIRST – Recognized as the first nine-position manually adjustable shock series in the off-road market
REDUCES FADE – Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
STRONG AND DURABLE – Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
HANDLES EXTREME TEMPERATURE CHANGES – Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation.
SMOOTH PERFORMANCE – Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures longer life
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$87.99

Twin Tube Construction
Advanced Foam-Cell Technology
Vehicle Specific Multi-Stage Valving
Increased Fluid Capacity For MAX Heat Dissipation
360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
Chrome Plated Shaft And Sintered Iron Piston
Comes With Black Boot

from

$117.99

Specifically engineered for high center of gravity light trucks and SUV’s to provide the handling, control and performance expected from Rancho® RS7000MT shock absorbers. These shocks provide enhanced stability over stock twin tubes by reducing body roll in evasive maneuvers and tight turns. These shocks feature a high-pressure gas charge that separates the unit’s internal oil and nitrogen to provide additional spring rate. This helps to maximize damping response that dissipates heat for better control. To further enhance ride control characteristics, Rancho® RS7000MT Monotube Shocks include a hydraulic lockout to cushion the impact as the vehicle suspension is fully extended.

Product Features:

1.97-in. (50mm) body diameter
Quicker damping response time
Monotube design with high pressure nitrogen gas charge
Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
Black natural rubber bushings enhance durability and reduce road harshness
Premium long lasting finish
46mm bore monotube construction, ideal for larger light trucks, SUVs and more
Off-road inspired Fluon banded piston, provides a consistent seal between piston and pressure tube

from

$71.99

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$87.99

Twin Tube Construction
Advanced Foam-Cell Technology
Vehicle Specific Multi-Stage Valving
Increased Fluid Capacity For MAX Heat Dissipation
360 Degree Arc-Welded End Mount And 180 Degree Directional Mounting
Chrome Plated Shaft And Sintered Iron Piston
Comes With Black Boot

from

$85.99

150 PSI Pressurized Nitrogen Gas
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings

from

$79.99

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Ram 2500
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$89.99

IMPROVED HANDLING AND PERFORMANCE – Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
MINIMIZES ROUGH RIDE – Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
STRONG AND DURABLE – Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
HANDLES EXTREME TEMPERATURE CHANGES – Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
SMOOTH PERFORMANCE – Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
REDUCES FADE – Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
MAINTAINS VEHICLE CONTROL – Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
BUILT TO LAST – Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$87.99

KYB Recommended Orem Replacement Shock
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Ram 2500
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions

from

$304.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag : When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway , A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll , During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$304.99

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$71.99

HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off road use. Skyjacker(R) hydro shocks: Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on and off road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:

Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
Multi Stage Velocity Sensitive Valving
Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
Bonded Iron Piston For Durability And Longer Shock Life
Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
Orifice Disk For Axle Control In Any Condition
Red Polyurethane Bushings
Limited Lifetime Warranty

Nitrogen Gas Charged Mono Tube, With External Reservoir, Non Adjustable, Single

from

$337.99

Skyjacker was established in 1974. We grew from a one bay garage into an international manufacturing warehouse. Skyjacker continues to strive to stay ahead of the game in the aftermarket industry. Skyjacker builds quality suspension products. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Shock Absorbers Provides Comfortable And Safe Ride
Meets The Quality Standards
Easy Installation

Most Popular 2018 Ram 2500 Control Arms

Customize your Ram with 8 Control Arms products like Lower Control Arm Bushings and Lower Control Arms, all priced under $332.99.

show more show less

from

$68.99

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$332.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$332.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$232.99

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$199.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$191.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$162.99

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$38.99

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Incorporates proven design and engineering features

Top Picks for 2018 Ram 2500 Coil and Leaf Springs

Upgrade Ram 2500s with top-quality Coil and Leaf Springs parts, including 4 OEM and aftermarket selections for your 2018 model.

show more show less

from

$257.99

Product Features:

COMPATIBILITY — Designed for Ram 2500/3500 heavy-duty trucks; Exc. Power Wagon
FITSáLARGER TIRES — Provides 2.5-in.áof lift to accommodate larger wheel/tires and to restore lost height due to heavyáwincháor bumperá(tire size varies by manufacture;áaftermarket bumpers, winches, etc. affect lift height)
EASY TO INSTALL — Kit includes two front coil springs that install easily with included hardware
RESISTS CORROSION — Powder-coated to resist rust and corrosion
ENGINEERED TO LASTá–áMade of high-strength steel that is shotápeenedáand heat treated for long life
BUY WITH CONFIDENCE — Comes with Rancho’s limited warranty

from

$117.99

Increase Rear Rake For Towing And Hauling
Leveling Rear Of Truck With Front
Easy Installation
Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials

from

$102.99

Increase Rear Rake For Towing And Hauling
Leveling Rear Of Truck With Front
Easy Installation
Limited Lifetime Warranty Against Defects In Design, Operation, Workmanship And Materials

from

$50.99

This leaf spring bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

In-Demand Air Suspension and Kits for 2018 Ram 2500s

Select from 8 premium Air Suspension and Kits parts for your 2018 Ram 2500, with prices ranging from $255.99 to $1,148.99.

show more show less

from

$517.99

Level out the front of your Ram 2500/3500 truck by 2.5-in. with the LEVEL IT system from Rancho. This leveling system features coil spring spacers and Rancho RS9000XL front shocks for superior on-road comfort and off-road performance.

Product Features:

COMPATIBILITY – Designed for Ram 2500 and 3500 heavy-duty trucks
LEVELED STANCE – Reduces factory rake and levels out truck’s stance by 2.5-in. (aftermarket bumpers, winches, etc. affect lift height)
COMPLETE SOLUTION – Kit includes coil spring spacers, Rancho RS9000XL front shocks, sway bar relocation brackets and hardware to accommodate tires up to 35-in. and direct bolt-up kit
DELIVERS SUPERIOR PERFORMANCE – Rancho RS9000XL shocks with nine-position damping control for superior on-road comfort and off-road performance
ENHANCED CONTROL – Sway bar relocation brackets ensure optimal angles for roll and sway control
EASY TO INSTALL – Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
COMPLETE PERFORMANCE UPGRADE – Transform your suspension with Rancho RS9000XL rear shocks (RS999044); sold separately
NOTES – Allows the use of OE wheels and tires; designed with 35-in. tires (tire size varies between manufacturers)
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$631.99

Most Popular And Comprehensive Air Spring Line
Maximizes The Vehicle Safe Load-Carrying Capacity, Stability, Ride Quality And Brake Effectiveness
Supports Up To 5,000 Pounds
Most Kits Are No-Drill Systems, Easily Installation

from

$1148.99

Upgraded repair – this air suspension compressor features upgraded wiring and coil materials in the motor, solenoid valve and coil assembly to help eliminate common sources of OE compressor failure
Direct replacement – designed to match the performance of the original equipment compressor on specified Ram 2500 and 3500 trucks
Improved design – engineered to resist fatigue and motor burnout for a more permanent repair solution
Trustworthy quality – backed by a team of product experts in the United States with more than a century of experience in the design of heavy duty truck parts

Suspension Shock Absorber: Hydraulic/Nitrogen Gas Charged, Non Adjustable Valving, Aluminum, Set of 2

from

$1008.00

The aluminum bodied Performance Series 2.0 Reservoir smooth body shock delivers FOX’s industry leading and race dominating performance in an affordable, hassle-free bolt on package. Its heat reducing design includes a metal impacted clear anodized aluminum shock body that dissipates heat faster than a conventional steel body shock. Its external reservoir allows for increase oil and nitrogen capacity while delivering a striking race look. The included black anodized reservoir mounting clamp and other components are CNC machined from 6061-T6 aluminum. The race developed high flow damping piston matched with application specific valving provides the Performance Series 2.0 Reservoir shock a predicable ride quality capable of handling the roughest road conditions.

Product Features:

2 Inch Impact Extruded 6061-T6 Aluminum Will Resist Rust Over Time
Body Plating Is Clear-Anodized For A Durable Finish
Reservoir: 2 Inch Smooth Bore 6061-T6 Aluminum Is Hard Anodized
Shaft Has 5/8 Inch Hard Chrome Plated Heat-Treated Alloy Steel
Piston: Race-Developed High-Flow Piston Design
Valving: Application Specific Valving To Maximize Performance
Seals: Redundant Sealing Pack System Main Seal, Wiper Seal, Scraper Seal
Bushing: Quiet Nitrile Rubber Allows For Increased Suspension Articulation

from

$747.99

Level out the front of your Ram 2500/3500 diesel truck by 2.5-in. with the LEVEL IT system from Rancho. This leveling system features coil spring spacers and Rancho RS9000XL front shocks for superior on-road comfort and off-road performance.

Product Features:

COMPATIBILITY – Designed for Ram 2500 and 3500 heavy-duty diesel trucks
LEVELED STANCE – Reduces factory rake and levels out truck’s stance by 2.5-in. (aftermarket bumpers, winches, etc. affect lift height)
COMPLETE SOLUTION – Kit includes coil springs, Rancho RS9000XL front shocks, sway bar relocation brackets and hardware to accommodate tires up to 35-in. and direct bolt-up kit
DELIVERS SUPERIOR PERFORMANCE – Rancho RS9000XL shocks with nine-position damping control for superior on-road comfort and off-road performance
ENHANCED CONTROL – Sway bar relocation brackets ensure optimal angles for roll and sway control
EASY TO INSTALL – Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
COMPLETE PERFORMANCE UPGRADE – Transform your suspension with Rancho RS9000XL rear shocks (RS999044); sold separately
NOTES – Allows the use of OE wheels and tires; designed with 35-in. tires (tire size varies between manufacturers)
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$552.99

Up To 5000 Pounds Of Leveling Capacity
Air Adjustable From 5 To 100 PSI
Built With Superior 2-Ply Fabric Reinforced Rubber
Includes Exclusive Roll Plates. No Mileage Restriction
End Caps Made Of Ultra High Strength Zytel(R) Nylon Strong As Steel, But Weighs Less And Is Corrosion Proof
Easy To Install With Illustrated Instruction Manual
Easy-To-Use Air Fittings
Refer To The Document Tab For The New Authorized Installer Program

from

$266.99

Made From Premium Materials
Meets The Highest Quality Standards
Provide A Smooth, Comfortable Ride
Maintain That Factory Ride Quality
Easy Installation

from

$255.99

Keep The Vehicle Level: Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
Reduce Bottoming Out, Protective Air Cushion Softens Contact Between The Axle And Frame
Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load

Most Sold 2018 Ram 2500 Suspension Hardware

Explore our best-selling Ram parts for the 2018 2500 among 1 OEM and aftermarket options starting from $1.99.

show more show less

from

$1.99

Offering Quality Replacement Parts
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts
Offers OE Fit And Function
Easy To Install

Top-Rated Suspension Parts Brands For Your 2018 Ram 2500

Shop for the best-rated brands offering Suspension Parts and other products for your 2018 Ram 2500s. Below you’ll find some of our best rated Suspension Parts from Monroe, and more. Suspension Parts from these brands that fit a 2018 2500 start at just $24.99 and are rated as high as 4.4 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Monroe 2018 Ram 2500 Suspension Parts

When it comes to maintaining or upgrading your 2018 Ram 2500, using quality Suspension Parts is essential to ensure durability and a perfect fit. Monroe ticks all of those boxes. We offer a wide selection of Monroe Suspension Parts, specifically designed for the 2018 Ram 2500. With over 2 Monroe brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.99, with an average price of just $25.99. Plus, with over 48 customer reviews and an average rating of 4.4 stars, you can trust that our Monroe Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $26.99

(35)

Shock-Mate Suspension Shock Absorber Bellows

“Used this to replace the torn shock boot on my Goldwing 1500 motorcycle. it fit well, used a tie warp and it was good to go”

from $24.99

(13)

Shock-Mate Suspension Shock Absorber Bellows

“Good deal.”

FAQs for 2018 Ram 2500 Suspension Parts

Which Suspension Parts are best-sellers for 2018 Ram 2500s?

Out of 66 Suspension Parts that fit 2018 Ram 2500s, the following parts are the top sellers:

Suspension Shock Absorber RS5000X (11451361) – $89.99
OESpectrum Front Suspension Shock Absorber (11275320) – $96.99
Suspension Shock Absorber RS9000XL (20740319) – $165.99

What’s the price range for 2018 Ram 2500 Suspension Parts?

Suspension Part prices for the 2018 Ram 2500 start at $1.99 and go up to $1,148.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2018 Ram 2500?

The average price for Suspension Parts for the 2018 Ram 2500 is $224.11. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Ram 2500 model years?

Yes, we currently carry Suspension Parts for 13 model years of Ram 2500s between 2011 and 2025. Suspension Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015, and 2014.

What are the cheapest Suspension Parts for my 2018 Ram 2500?

The cheapest 2018 Ram 2500 Suspension Parts we carry in stock are:

OE Replacement, U-Type (50074657) – $1.99
Shock-Mate Suspension Shock Absorber Bellows (5100009) – $24.99
Shock-Mate Suspension Shock Absorber Bellows (15740047) – $26.99
Suspension Control Arm Bushing (12070881) – $38.99
Suspension Leaf Spring Bumper (50297918) – $50.99

What are the top-rated Suspension Parts that fit the 2018 Ram 2500?

Out of 876 reviews by customers, our 2018 Ram 2500 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2018 Ram 2500 and their top-rated products:

Shocks and Struts
- Hydro Shock W/Red Boot (11465436) – $71.99
- Shock-Mate Suspension Shock Absorber Bellows (5100009) – $24.99
- Shock-Mate Suspension Shock Absorber Bellows (15740047) – $26.99

What types of Suspension Parts do you sell for my 2018 Ram 2500?

As of 3/1/26, these are some of the most in-demand types of Suspension Parts for a 2018 Ram 2500:

Can I get help with 2018 Ram 2500 Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ram Suspension Parts and more.

What is your return policy for Ram 2500 Suspension Parts?

Advance Auto Parts keeps returns simple. For new Ram 2500 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Ram 2500 Suspension Parts

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 8,000Lb, Aeon Hollow Rubber (Part No.DRTT3500D)

TrailFX – Coil Spring Spacer, 1-1/2 Inch Lift, Saddle Style, Steel, Set of 2 (Part No.D15RD1)

Firestone Ride-Rite – Double Bellows, 8.91"H Extended, 3"H Compressed, 7.52"Dia, 1/4" Npt Port, Single (Part No.6873)

Firestone Ride-Rite – Double Bellows, 8.91"H Extended, 3"H Compressed, 7.52"Dia, 1/4" NPT Port, Single (Part No.6401)

Skyjacker – Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.B8558)

FOX Offroad Shocks – Hydraulic/Nitrogen Gas Charged Mono Tube, Non Adjustable, Without Boots, Single (Part No.985-24-024)

Dorman – Suspension Leaf Spring Bumper (Part No.540-207)

Suncore – Shock Kit (Part No.2-12S256200-001)

Carquest Premium – Upper Control Arm: Front (Part No.800-233400)

Dorman – Suspension Control Arm (Part No.524-012)

Crown Auto Jeep Replacmnt – OE Replacement, U-Type (Part No.6504118)

Rare Parts – Control Arm Bushing (Part No.RP19813)

Dorman – Suspension Control Arm Bushing (Part No.533-907)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Dorman – Air Suspension Compressor (OE Fix) (Part No.949-825)

Rancho – Coil Spring Set (Part No.RS80451B)

Skyjacker – 2 1/2 Inch Lift, Powder Coated, Black, Set Of 2 (Part No.D25)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

KYB – Gas Shock (Part No.3440019)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55221)

Monroe – Gas-Matic Suspension Shock Absorber (Part No.59641)

Skyjacker – Nitro Shock W/Red Boot (Part No.N8092)

Skyjacker – Hydro Shock W/Red Boot (Part No.H7017)

Skyjacker – 2-2.5In. Frt Cls: 13 Ram25/3500 (Part No.R25)

Daystar – Component For Daystar Leveling Kit Kc09101Bks (Part No.KC09101BK)

Firestone Ride-Rite – Air Spring, Frame Mount, Up To 5000 Lb Leveling Capacity, 5 To 100 Psi, Rubber (Part No.2598)

Air Lift – Leaf Helper Spring: Air Spring, Frame Mount, Upto 5000 Pounds Of Leveling Capacity (Part No.57289)

Firestone Ride-Rite – Air Spring, Frame Mount, 3200-5000Lb Leveling, Adjustable From 5-100Psi, Rubber (Part No.2299)

Skyjacker – Hydro Shock W/Red Boot (Part No.H7093)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1997)

Monroe – Shock-Mate Suspension Shock Absorber Bellows (Part No.SA1998)

Skyjacker – Monotube Shock: M9593 (Part No.M9593)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55044)

Monroe – OESpectrum Front Suspension Shock Absorber (Part No.911198)

Rancho – Suspension Shock Absorber RS9000XL (Part No.RS999044)

Rancho – RS5000X Suspension Shock Absorber (Part No.RS55197)

Monroe – OESpectrum Rear Suspension Shock Absorber (Part No.911336)

Monroe – Gas-Magnum Suspension Shock Absorber (Part No.34534)

Skyjacker – Hydraulic, Twin Tube, Limited Lifetime Warranty, Non-Adjustable, Single (Part No.B8591)

Rancho – Suspension Shock Absorber RS9000XL (Part No.RS999197)

Skyjacker – Black Max Shock Absorber (Part No.B8594)

Rancho – RS7000MT Monotube Shock Absorber (Part No.RS7044)

Skyjacker – Hydro Shock W/Red Boot (Part No.H7094)

Skyjacker – Black Max Shock Absorber (Part No.B8592)

Skyjacker – Nitro Shock W/Red Boot (Part No.N8091)

KYB – Gas Shock (Part No.3440019)

Rancho – Suspension Shock Absorber RS5000X (Part No.RS55048)

KYB – Gas Shock (Part No.3440018)

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 8,600Lb, Aeon Hollow Rubber (Part No.DR2500D)

Timbren SES – Rubber Spring, Frame Mount, 3,000 Pound Weight Capacity Per Set (Part No.DF25004B)

Skyjacker – Hydro 7000, Hydraulic, Shock Absorber, 22.63 in. Extended, 13.75 in. Collapsed (Part No.H7091)

Skyjacker – Nitrogen Gas Charged Mono Tube, With External Reservoir, Non Adjustable, Single (Part No.A2091)

MOOG – Suspension Control Arm Bushing (Part No.K201634)

Dorman – Suspension Control Arm (Part No.527-578)

Dorman – Suspension Control Arm (Part No.527-577)

MOOG – Rear Lower Suspension Control Arm (Part No.RK643333)

Dorman – Suspension Control Arm (Part No.527-173)

Dorman – Suspension Control Arm (Part No.527-172)

MOOG – Rear Upper Suspension Control Arm (Part No.RK643422)

MOOG – Suspension Control Arm Bushing (Part No.K201767)

Rancho – Coil Spring Set (Part No.RS80451B)

TrailFX – Coil Spring Spacer, 1-1/2 Inch Lift, Saddle Style, Steel, Set of 2 (Part No.D15RD1)

TrailFX – Coil Spring Spacer, 1 Inch Lift, Saddle Style, Steel, Powder Coated, Black, Set of 2 (Part No.D10RD1)

Dorman – Suspension Leaf Spring Bumper (Part No.540-207)

Rancho – Suspension Leveling Kit (Part No.RS66454R9)

Firestone Ride-Rite – Air Spring, Frame Mount, Up To 5000 Lb Leveling Capacity, 5 To 100 Psi, Rubber (Part No.2598)

Dorman – Air Suspension Compressor (OE Fix) (Part No.949-825)

FOX Offroad Shocks – Suspension Shock Absorber: Hydraulic/Nitrogen Gas Charged, Non Adjustable Valving, Aluminum, Set of 2 (Part No.885-24-232)

Rancho – Level It Suspension Leveling Kit (Part No.RS66451R9)

Air Lift – Leaf Helper Spring: Air Spring, Frame Mount, Upto 5000 Pounds Of Leveling Capacity (Part No.57289)

Skyjacker – 2-2.5In. Frt Cls: 13 Ram25/3500 (Part No.R25)

Firestone Ride-Rite – Double Bellows, 8.91"H Extended, 3"H Compressed, 7.52"Dia, 1/4" Npt Port, Single (Part No.6873)

Crown Auto Jeep Replacmnt – OE Replacement, U-Type (Part No.6504118)