2018 Nissan Maxima Cooling and Climate Controls

Essential 2018 Nissan Maxima Cooling and Climate Controls

Factory Air – Coolant Temp Sensor Switch (Part No.36413)

Coolant Temp Sensor Switch

from

$30.05
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Brass construction for accurate temperature sensing
  • Color coded for easy identification
  • Zinc coated terminal to resist corrosion
See More

Ishino Stone – Water Pipe O-Ring (Part No.G2026550536ISH)

Water Pipe O-Ring

from

$2.33
Water Pipe O-Ring

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.25568)

Engine Coolant Thermostat Housing Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

KAI – A/C Expansion Valve (Part No.ACX011074)

A/C Expansion Valve

from

$36.99
New Standard Replacement A/C Expansion Valve

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Metrix – METRIX Water Pump (Part No.G300045907MTX)

METRIX Water Pump

from

$77.80
METRIX water pumps provide an outstanding coolant flow rate in all driving conditions, from stationary to high speed. Performance is guaranteed through corrosion protection, cavitation resistance, reliable sealing technology, and the use of high quality components. METRIX water pumps deliver optimal hydraulic efficiency with maximum pressure resistance to efficiently protect against over-heating while improving fuel consumption and reducing emissions.

Product Features:
  • OE Quality – Higher quality and reliable performance compared to competitive products
  • Exact fit – No additional time consuming steps needed for installation
  • OE Engineered – Optimal hydraulic efficiency, Maximum pressure resistance
  • Advanced Impeller Design – Outstanding coolant flow rate, Optimal hydraulic efficiency.
  • Comes with required O-Rings and gaskets.
See More

Dorman – Thermostat Assembly: Includes Housing, Gasket, and Thermostat, 180 Degrees (Part No.902-5140)

Thermostat Assembly: Includes Housing, Gasket, and Thermostat, 180 Degrees

from

$28.49
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
See More

Carquest Premium – Blower Motor: Without Wheel (Part No.35010)

Blower Motor: Without Wheel

from

$55.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

KAI – A/C Condenser (Part No.CNDDPI3061)

A/C Condenser

from

$89.99
New Platinum Pro A/C Condenser, From Production Date 10/00, With High Pressure Switch Hole

Product Features:
  • From Production Date 10/00, With High Pressure Switch Hole, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

NOK – Water Pump Gasket (Part No.G3040477059NOK)

Water Pump Gasket

from

$5.36
Water Pump Gasket

Metrix – METRIX Heater Core (Part No.R3000394528MTX)

METRIX Heater Core

from

$152.19
METRIX heater cores are manufactured to OE specifications and provide reliable, efficient performance. METRIX heater cores are manufactured from high quality aluminum or copper and feature high-strength brazed joints to ensure a highly durable, long-lasting product.

Product Features:
  • OE-Quality – Exact Fit
  • Aluminum or copper tubes, air centers and tanks
  • Includes the required o-rings and associated hardware
  • High strength brazed joints
  • Designed and manufactured to OE specifications.
  • Includes seals and/or O-Rings (when required)
See More

Dorman – Help – Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack (Part No.54245)

Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack

from

$9.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Carquest Premium – Radiator Cap: 13 PSI (Part No.10227)

Radiator Cap: 13 PSI

from

$11.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – A/C Filter Drier w/ Pad Mount (Part No.T83131)

A/C Filter Drier w/ Pad Mount

from

$23.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

DENSO – New Compressor With Clutch (Part No.471-5011)

New Compressor With Clutch

from

$395.99
As one of the world+s largest OE suppliers of A/C compressors DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO+s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

Product Features:
  • DENSO is the world’s largest OE supplier of A/C compressors
  • Each compressor is precision manufactured for exact replacement
  • Designed for high output and extended durability
  • Highest quality in the Aftermarket
See More

Nippon Reinz – Water Pump Gasket (Part No.G304029452NRZ)

Water Pump Gasket

from

$2.21
NIPPON REINZ engineers work with OEMs to develop complete engine sealing solutions for gasoline, diesel, and alternative energy vehicles. We employ custom sealing solutions through our expert problem solving utilizing our regional research and development centers. As an Integral Partner with Virtually Every major vehicle and engine manufacturer worldwide, NIPPON REINZ offers a comprehensive range of sealing Innovative Systems, INCLUDING Head gaskets, Heat shields, sealing modules, secondary gaskets, Valve stem Seals, and transmission components.
See More

Dorman – Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement (Part No.603-505)

Non-Pressurized Coolant Reservoir: White, Plastic, Original Equipment Replacement

from

$90.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12021)

Radiator Cap Tester Adapter

from

$17.79
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

KAI – Radiator Support (Part No.NI1225185V)

Radiator Support

from

$104.99
New Economy Replacement Radiator Support, Bolt-In, Made Of Pp/Gf Composite

Product Features:
  • Bolt-In, Made Of Pp/Gf Composite, Made Of Polypropelene & Glass fiber
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Felpro – Engine Water Pump Installation Kit (Part No.ES 70894)

Engine Water Pump Installation Kit

from

$8.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

MAHLE Original – WTR INLET GASKET (Part No.C31681)

WTR INLET GASKET

from

$3.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Ajusa – FI Throttle Body Mou (Part No.C7001447703AJU)

FI Throttle Body Mou

from

$28.09
FI Throttle Body Mou

Dorman – Radiator Fan Assembly: Dual, Cost Effective & Reliable (Part No.620-453)

Radiator Fan Assembly: Dual, Cost Effective & Reliable

from

$151.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Carquest Premium – AC Pressure Sensor (Part No.ABA1011)

AC Pressure Sensor

from

$114.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.CCA1033)

A/C Refrigerant Pressure Sensor

from

$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432509)

Radiator: With Transmission Oil Cooler

from

$184.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.41861)

Radiator: With Transmission Oil Cooler

from

$461.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

2018 Nissan Maxima Cooling and Climate Controls

You count on your 2018 Nissan Maxima to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 43 Cooling and Climate Controls ranging in price from $2.33 to $849.99, you’re sure to find everything you need for your 2018 Nissan Maxima.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 17 different brands like Permatex, Carquest Premium, and Dorman. 2018 Nissan Maxima Cooling and Climate Controls start as low as $2.33!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 2,145 extensive product reviews on 2018 Nissan Maxima Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are A/C Condenser and Receiver Drier Assembly with 5.0 stars and The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ with 5.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2018 Nissan Maxima below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2018 Nissan Maxima

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 Nissan Maxima running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Dorman, and even more.

Popular Dorman Cooling and Climate Controls

You’ll find popular Dorman brand products across Engine Cooling Parts. All are waiting to get your 2018 Nissan Maxima back on the road. Some of the top-rated Dorman products in these categories are:
Radiator Fan Assembly: Dual, Cost Effective & Reliable
from $151.99
(1)
Radiator Fan Assembly: Dual, Cost Effective & Reliable
Engine Cooling Fans
Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack
from $9.99
(6)
Engine Coolant Reservoir Cap: Flip Top, Plastic, 1 Pack
Coolant Reservoir Caps

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2018 Nissan Maxima, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2018 Nissan Maxima Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2018 Nissan Maxima?

Out of 43 Cooling and Climate Controls for the 2018 Nissan Maxima, the most popular in our inventory are:
Radiator: With Transmission Oil Cooler
from $221.99
(12)
Radiator: With Transmission Oil Cooler
Radiators
Radiator Cap: 20 PSI
from $21.99
(2)
Radiator Cap: 20 PSI
Coolant Reservoir Caps
A/C Filter Drier w/ Pad Mount
from $27.49
(9)
A/C Filter Drier w/ Pad Mount
Accumulator and Receiver Driers

What are the top-rated 2018 Nissan Maxima Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2018 Nissan Maxima based on customer reviews/ratings are:
A/C Condenser and Receiver Drier Assembly
from $249.99
(2)
A/C Condenser and Receiver Drier Assembly
“Things about this product it is the guarranty and that the product fits as an original article.”
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
“Easy as could be to use”
Engine Coolant Outlet Gasket
from $5.49
(2)
Engine Coolant Outlet Gasket
“Great product”