2018 Nissan 370Z Fuel and Emissions Systems

Below you will find various in-demand Nissan Fuel and Emissions Systems, components and accessories for your 2018 370Z. Advance Auto Parts has popular 370Z parts like Fuel Pumps, Fuel Injectors, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other 370Z model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2019, 2020 and more. Select a category of 2018 Nissan 370Z Fuel and Emissions Systems below and start saving instantly.

Popular 2018 Nissan 370Z Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

Gas Caps

Oxygen Sensors

Vapor Canister Vent Solenoids

Vapor Canister Shutoff Valves

MAP-Barometric Pressures

Canister Purge Solenoids

Fuel Injectors

Fuel Injection Throttle Control Actuator Modules

Fuel Injector O-Ring Kits

Fuel Tank Lock Rings

Fuel Injector Connectors

Fuel Injector O-rings

Fuel Cap Tester Adapters

Essential Fuel and Emissions Systems for 2018 Nissan 370Zs

from

$339.99

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver’s disposal.

Product Features:

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$4.29

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$5.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$253.33

DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$153.99

from

$40.99

from

$299.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$155.17

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$24.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$17.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$139.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$156.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smoot h vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle¿s engine control management system.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$1.25

Fuel Injector O-Ring

from

$2.01

Fuel Injector O-Ring

from

$21.46

Fuel Sender Lock Rin

from

$21.49

Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock. Made of durable materials for reliable service.

Product Features:

Direct replacement – this fuel tank sending unit lock ring is made to match the fit and performance of the original ring on specific vehicle applications
Recommended for replacement whenever the sending unit is serviced, this fuel tank sending unit lock ring securely retains the fuel pump assembly to the lock
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$115.99

A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.

Product Features:

Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation.
Quality construction – manufactured from premium materials for a long service life.
Excellent value – original equipment function at a lower price
Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance

from

$122.52

Vapor Canister Vent

from

$99.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$82.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$84.23

The Original Equipment Purge Valve is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

Upgrade your 2018 Nissan 370Z with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2018 Nissan 370Z, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 370Z functioning at its best. At Advance Auto Parts, we offer a wide selection of 39 Fuel and Emissions Systems for the 2018 Nissan 370Z, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2018 Nissan 370Z at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.25 to $345.99, with an average price of $87.32. Our 39 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 2018 Nissan 370Z without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Nissan 370Z, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Hitachi Carquest Premium, and more. Hitachi Fuel and Emissions Systems start at just $139.99 and boast an impressive 5 stars average rating from customers. With 2,574 customer reviews and counting, our 2018 Nissan 370Z Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Nissan 370Z is always ready to roll. We’re committed to providing you with everything you need to keep your 370Z in top shape, all in one place. Start shopping confidently below for your 2018 Nissan 370Z!

Best-Selling Fuel Pumps for 2018 Nissan 370Zs

Enhance the driving experience in your Nissan with 2 quality Fuel Pump components, starting at $15.99.

show more show less

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Most Popular 2018 Nissan 370Z Fuel Injectors

Customize your Nissan with 13 Fuel Injectors products like Air Flow Meters and Mass Air, Fuel Injectors, and Fuel Injector O-Ring Kits, all priced under $339.99.

show more show less

from

$139.99

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$4.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$156.99

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle¿s engine control management system.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$135.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$5.29

Premium OE quality materials
Services one injector

from

$159.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$181.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$181.79

Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$82.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$339.99

Reduces Throttle Response Time
Improves Acceleration
Easy To Install
Does Not Affect The Vehicles Electronic System

from

$4.29

from

$2.01

Fuel Injector O-Ring

from

$1.25

Fuel Injector O-Ring

Top Picks for 2018 Nissan 370Z Oxygen Sensors

Upgrade Nissan 370Zs with top-quality Oxygen Sensors parts, including 3 OEM and aftermarket selections for your 2018 model.

show more show less

from

$94.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$149.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$138.82

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

In-Demand Gas Caps for 2018 Nissan 370Zs

Select from 12 premium Gas Caps parts for your 2018 Nissan 370Z, with prices ranging from $6.99 to $24.99.

show more show less

from

$11.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
“Torque Override” feature aids in the proper installation of the fuel cap. It produces an audible click as the O-ring that seals the cap is properly compressed.

from

$23.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$6.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

from

$23.99

Experience uncompromising quality and emissions compliance with these tethered fuel caps. Manufactured with top-tier materials and rigorous production and safety standards adhering to Original Equipment Manufacturer guidelines. Designed meticulously to meet both state and federal emissions requirements, it ensures environmental responsibility. With its specifically engineered pressure and vacuum relief valves, fuel evaporation becomes a thing of the past. Bid farewell to the risk of losing up to 30 gallons of precious gasoline over a year due to a leaking fuel cap. Trust in our superior construction to safeguard your fuel and contribute to a greener future.

from

$10.99

None

Product Features:

Protects your fuel from theft and vandalism
Manufactured from durable, long-life materials
Independently tested for emission control
Passes all state and federal emissions tests
Reduces air pollution with proper sealing and venting

Most Sold 2018 Nissan 370Z Air Flow Sensors

Explore our best-selling Nissan parts for the 2018 370Z among 4 OEM and aftermarket options starting from $168.99.

show more show less

from

$257.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$168.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$345.99

Encore Automotive Genuine OE manifold absolute pressure sensors (MAP) are application specific and provide real time manifold pressure to the ECU. The air density is calculated to determine the MAF rate, which will result in identifying the required fuel for optimum combustion and ignition timing.

Product Features:

Genuine OE Part
Ensure optimal fuel efficiency.

from

$255.81

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

Top-Rated Fuel and Emissions Systems Brands For Your 2018 Nissan 370Z

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2018 Nissan 370Zs. Below you’ll find some of our best rated Fuel and Emissions Systems from Hitachi and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2018 370Z start at just $4.29 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Hitachi 2018 Nissan 370Z Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2018 Nissan 370Z, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Hitachi ticks all of those boxes. We offer a wide selection of Hitachi Fuel and Emissions Systems, specifically designed for the 2018 Nissan 370Z. With over 2 Hitachi brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $139.99, with an average price of just $160.89. Plus, with over 16 customer reviews and an average rating of 5 stars, you can trust that our Hitachi Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$181.79

This product is not rated

Mass Air Sensor

“”

from
$139.99

(16)

Air Flow Sensor – New Actual OE Part

“Installation was easy requiring two bolts.”

Popular Carquest Premium 2018 Nissan 370Z Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2018 Nissan 370Z owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2018 370Z, Advance Auto Parts carries a full inventory of 18 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $4.29 to $135.99, plus, with more than 405 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$5.29

This product is not rated

Fuel Injector Seal Kit

“”

from
$99.99

This product is not rated

Vapor Canister Vent Solenoid

“”

from
$10.99

This product is not rated

Keyed Alike Locking Fuel Cap

“”

FAQs for 2018 Nissan 370Z Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2018 Nissan 370Zs?

Out of 39 Fuel and Emissions Systems that fit 2018 Nissan 370Zs, the following parts are the top sellers:

Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (12102600) – $23.99
Air Flow Sensor – New Actual OE Part (10594838) – $139.99

What’s the price range for 2018 Nissan 370Z Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2018 Nissan 370Z start at $1.25 and go up to $345.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2018 Nissan 370Z?

The average price for Fuel and Emissions Systems for the 2018 Nissan 370Z is $87.32. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Nissan 370Z model years?

Yes, we currently carry Fuel and Emissions Systems for 11 model years of Nissan 370Zs between 2009 and 2020. Fuel and Emissions Systems are bought most frequently for the following model years: 2020, 2019, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Fuel and Emissions Systems for my 2018 Nissan 370Z?

The cheapest 2018 Nissan 370Z Fuel and Emissions Systems we carry in stock are:

Fuel Injector O-Ring (10740395) – $1.25
Fuel Injector O-Ring (11844929) – $2.01
Fuel Injector Connector (11477998) – $4.29
Fuel Injector Connector (12541458) – $4.29
Fuel Injector Seal Kit (11692627) – $5.29

What are the top-rated Fuel and Emissions Systems that fit the 2018 Nissan 370Z?

Out of 2,574 reviews by customers, our 2018 Nissan 370Z Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2018 Nissan 370Z and their top-rated products:

Air Flow Sensors
- Wideband Oxygen Sensor: Upstream, 4 Wire, 15.04" Long, Heated, Exact Fit (11429995) – $257.99
Vapor Canister Purge Valves
- Wideband Oxygen Sensor: Upstream, 4 Wire, 15.04" Long, Heated, Exact Fit (11429995) – $257.99

What types of Fuel and Emissions Systems do you sell for my 2018 Nissan 370Z?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2018 Nissan 370Z:

Can I get help with 2018 Nissan 370Z Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Fuel and Emissions Systems and more.

What is your return policy for Nissan 370Z Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Nissan 370Z Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Nissan 370Z Fuel and Emissions Systems

aFe POWER – Sprint Booster (Part No.77-16101)

Carquest Premium – Fuel Injector Connector (Part No.PTA1064)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015437677ND)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Manifold Absolute Pressure Sensor (Part No.ECA1617)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1282)

Bosch – Wideband Oxygen Sensor: 5 Wire, 14.4" Long, Heated, Exact Fit (Part No.18133)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010571212ND)

Carquest Premium – Locking Fuel Cap: 10512, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10512)

Carquest Premium – Fuel Cap: 10838, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10838)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0031)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50036)

Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)

Ishino Stone – Fuel Injector O-Ring (Part No.C1012262676ISH)

Dorman – Fuel Sender Lock Rin (Part No.E2029751095DOR)

Carquest – Fuel Pump Lock Ring (Part No.579-019)

Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-504)

Autopart International Inc – Vapor Canister Vent (Part No.B70881960073API)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1008)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3684)

Original Equipment – Purge Valve (Part No.B7080770457OEA)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0031)

Carquest – Fuel Injector Connector (Part No.PT2318)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50036)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6210)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)

Spectra Premium – Mass Air Flow Sensor (Part No.MA159)

Delphi – Mass Air Flow Sensor (Part No.AF10141)

Hitachi – Mass Air Sensor (Part No.B3150422979HIT)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3684)

aFe POWER – Sprint Booster (Part No.77-16101)

Carquest Premium – Fuel Injector Connector (Part No.PTA1064)

Ishino Stone – Fuel Injector O-Ring (Part No.C1012262676ISH)

Ishino – Fuel Injector O-Ring (Part No.C101245500ISH)

NTK – Switching Oxygen Sensor: 4 Wire, 14.5" Long, Heated, Direct Fit (Part No.24167)

Bosch – Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.18137)

DENSO – Oxygen Sensor (Part No.C5010454208ND)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Fuel Cap: 10837, Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10501)

Carquest Premium – Fuel Cap: 10819, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819)

Carquest Premium – Locking Fuel Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Cap: 10507, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10507)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Motorad – Tethered Gas Cap: Non-Locking, Original Equipment Manufacturer, Reduces Air Pollution, 1 Pack (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 15.04" Long, Heated, Exact Fit (Part No.234-9148)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 4 Wire, 20" Long, Heated, Direct Fit (Part No.24786)

Encore Automotive – Genuine OE Manifold Absolute Pressure Sensor (Part No.MAP-J50001)

DENSO – Air Fuel Ratio Senso (Part No.C5015690067ND)