2018 Honda Accord Exhaust System Kits

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

Product Features:

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

The MagnaFlow 2018-2022 Honda Accord Street Series Cat-Back Performance Exhaust System 19393 brings out the personality of your 2.0L 2018-2022 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19393 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19393 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow 2013-2017 Honda Accord Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2013-2017 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19181 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19181 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe is proud to introduce the new Takeda Dual Cat-Back Exhaust System for the 13-14 Honda Accord LX, EX, EX-L Sedan L4-2.4L. In recent testing this system produced 13 horsepower and 16 lbs. x ft. of torque. This exhaust starts out with an OE style flange and uses 2.5in. mandrel bent 304 stainless steel tubing and merges into dual 2.5in. tubing which improves performance across the power band while maintains a great tone. The dual, high flow, polished 304 stainless steel mufflers give an aggressive sound at high RPMs, yet maintaining a subtle tone at cruising speeds. To finish off this 100% TIG-welded exhaust are dual, Takeda laser etched, double wall, angle cut 304 stainless steel tips. This exhaust is designed to convert the standard L4 single exhaust into a sporty dual exhaust. It is a direct bolt on system which requires no cutting or drilling and includes all necessary hardware for a hassle free installation.

Product Features:

• Single To Dual Exhaust Conversion
• Direct Bolt-On System
• No Cutting Or Drilling
• Includes All Necessary Hardware

Add power, sound and taste to your Accord with this Takeda axle-back system. 2-1/4″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +7 HP and +7 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

Product Features:

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

Add power, sound and taste to your Accord with this Takeda axle-back system. 2-1/4″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +7 HP and +7 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

Product Features:

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

The MagnaFlow 2008-2012 Honda Accord Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2008-2012 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16817 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16817 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
• System Features Polished T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

The MagnaFlow 1994-1997 Honda Accord Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.2L 1994-1997 Honda Accord with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Accord exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Accord’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15686 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15686 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Add power, sound and taste to your Accord with this Takeda cat-back system. 2-1/2″ to 1-3/4″ mandrel bent, 304 stainless steel tubing improves exhaust flow to deliver up to +13 HP and +16 lbs. x ft. torque. 100% hand TIG-welded for long lasting strength and durability, this Takeda system incorporates dual, high-flow 304 stainless steel mufflers to maintain an aggressive tone. Dual, oval, angle-cut tips etched with the Takeda logo gives your Accord a track-style, custom appearance.

Product Features:

• Brush Finished 304 Stainless Steel For Performance and Good Looks
• Dual Stainless Steel Mufflers Delivers A Deep Aggressive Tone
• Dual Oval Tips w/Etched Takeda Logo Give A Custom Appearance
• 100% Hand TIG-Welded For Strength and Durability

This unique dual transverse exhaust system is constructed form mandrel bent stainless steel and is TIG welded. This system was designed and engineered by tuning the perfect tube lengths; ultimately maximizing performance across the power band while maintaining a great tone. aFe carefully engineered this system to maintain distinct exhaust tones. All exhaust systems are engineered and manufactured in our Corona California manufacturing facility. All systems use factory mounting locations providing stability and hassle free installation. High quality band clamps are used for a complete 360 degree sealing surface. Dual free flowing transverse mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Product Features:

• Massive Oval Double Wall Tips
• Leak Free Seal
• Aggressive Sound
• Simple Installation